Category: Automotive

  • 10L0L Golf Cart Starter Generator Brush Kit for EZGO, Club Car, Yamaha, OEM# 81-81200 26658-G01 101869302 JF2-81111-00-00 JF2-H1111-00-00, Set of 4

    10L0L Golf Cart Starter Generator Brush Kit for EZGO, Club Car, Yamaha, OEM# 81-81200 26658-G01 101869302 JF2-81111-00-00 JF2-H1111-00-00, Set of 4


    Set of 4 Golf Cart Starter Generator Brush Kit
    Length: 1.024in / 26mm
    Width: 0.531in / 13.5mm
    Height: 0.217in / 5.5mm
    Lead Length: 1.575in / 40mm

    For Club Car gas 1984-2002
    For EZGO gas 2 cycle 1978-UP, 4-Cycle 1991-UP
    For Yamaha gas G1/G2/G8/G9/G11/G14/G16/G21/G22/G23/G27/G29
    For Columbia gas 2 cycle 1972-1995
    For Taylor Dunn R-680 1986-1997

    OEM Cross Reference
    Manufacturer & Part Number:
    1013023 CC
    1014699 CC
    101869301 CC
    101869302 CC
    30443-77 CC
    16888-G1 EZ
    26658-G01 EZ
    81-81200 EZ
    J10-81111-10-00 YA
    J38-81111-10-00 YA
    JF2-81111-00-00 YA
    JF2-H1111-00-00 YA
    JF7-81111-00-00 YA
    6-060 FP
    CP16888-G1 CP
    30443-77 CO
    GG1-801090 HY
    30443-77 IMC
    1018693-02 IMC
    529 BU
    9448 B1
    MTR CC 8693 B1
    MTR CHD 3044377 B1
    MTR ML 0529 B1
    LV693 LV
    LV699 LV
    LVJ693 LV
    PRT-529DS EC
    STG-2100 EC
    30422-69 HD

    Application:
    These brushes are suitable for the following starter generator original equipment manufacturer & part number
    For Club Car 1012316, 103678502, 101833701,1018294-01, 1018337-01, 101833701
    For Columbia PARCAR 30083-69A, 30083-69B, 30083-69C, 30083-69D, 30083-69E
    For EZ-GO 25533-G01, 26993-G01, 27065-G01
    For HITACHI 3102201HI1, GSB107-01, GSB107-01A, GSB107-02, GSB107-04A, GSB107-04C, GSB107-06 , GSB107-06B, GSB107-06E, GSB107-06F, GSB107-06G, GSB107-06K, GSB107-10B, GSB107-10C
    For MANDO G338771, G096503, G278441, M063686
    For VALEO TMC001B0011
    For YAMAHA 10-81100-10-00, J38-81100-10-00, J38-81100-11-00, JN6-H1100-00-00, JN6-H1100-01-00, JN6-H1100-02-00
    Product Dimensions ‏ : ‎ 1.02 x 0.53 x 0.04 inches; 1.41 ounces
    Date First Available ‏ : ‎ November 17, 2020
    Manufacturer ‏ : ‎ 10L0L
    ASIN ‏ : ‎ B08NPSY248

    Set of 4 brushes for Reliance & Hitachi Starter Generators, application on golf cart & utility vehicle
    For Club Car gas 1984-2002 (Not fit Precedent), replaces OEM part# 1013023, 1014699, 1018693-01, 101869301, 1018693-02, 101869302
    For EZGO gas 2 cycle 1978-up, 4-Cycle 1991-up, replaces OEM part# 16888-G1, 16888G1, 26658-G01, 26658G01, 81-81200
    For Yamaha gas G1 G2 G8 G9 G11 G14 G16 G21 G22 G23 G27 G29, replaces OEM part# J10-81111-10-00, J38-81111-10-00, JF2-81111-00-00, JF2-H1111-00-00, JF7-81111-00-00
    Please check the details for more OEM cross reference or starter generator applicable model list

    Price: $13.99 – $12.59
    (as of Jan 23, 2025 06:49:12 UTC – Details)





    Customer Reviews

    Reviewer: Sharkster
    Rating: 5.0 out of 5 stars
    Title: Works good.
    Review: Put these in an old Ezgo 2 cycle golf cart that has the starter built into the engine. The original brushes are discontinued and these have to be modified by sanding down to size. Digital calipers and sandpaper on a flat surface worked well for the job. Cart starts like new now. Good price.

    Reviewer: Gavin
    Rating: 5.0 out of 5 stars
    Title: Fit as intended
    Review: Easy to swap out and fit right in as replacements. G16 yamaha cart.

    Reviewer: Rsnow
    Rating: 5.0 out of 5 stars
    Title: Brushes
    Review: Product was very good quality and fast shipping

    Reviewer: Bobby P.
    Rating: 5.0 out of 5 stars
    Title: They worked great
    Review: Installation was easy. The brushes worked fine

    Reviewer: Jared Roser
    Rating: 4.0 out of 5 stars
    Title: Fit and worked
    Review: Purchased these due to having intermittent starting issues on my 2004 Yamaha G22 golfcart. Replaced the brushes and sanded the armiture when brushes contact and reassembled. Problem fixed! Cart is used heavily from May till Oct. Will update review if I encounter problems.

    Reviewer: JF De Leon
    Rating: 5.0 out of 5 stars
    Title: Exactly the same as the originals
    Review: Brushes are exactly the same as the originals. Installed on my G9 Yamaha gas golf cart.

    Reviewer: Dennis W.
    Rating: 5.0 out of 5 stars
    Title: Bought a few items from this seller
    Review: All items purchased from them have been great

    Reviewer: Dave
    Rating: 5.0 out of 5 stars
    Title: They fit
    Review: Good insulation on wire, all features were correct. Did not have wear gauge mark, although one would have to remove the starter generator to remove the inspection plugs to find them anyway.

    Reviewer: Gord Burnett
    Rating: 5.0 out of 5 stars
    Title:
    Review: Changed out the old worn brushes with these. Fit perfectly and work like a charm.

    Reviewer: cliff
    Rating: 5.0 out of 5 stars
    Title:
    Review: Thank you for the great quality of material and workmanship in your product.

    Reviewer: pcfromdcbc
    Rating: 5.0 out of 5 stars
    Title:
    Review: Same size and worked good

    Reviewer: Amazon Customer
    Rating: 5.0 out of 5 stars
    Title:
    Review: Back on the road and not t a bit g expense

    Reviewer: Emanuele
    Rating: 4.0 out of 5 stars
    Title:
    Review: Quality brushes and a good fit.

  • 3M Super-Strength Molding Tape, 1/2 in x 15 ft, High Strength Double-Sided Adhesive, Permanently Attaches Side Moldings, Trim and Emblems to Interior and Exterior of Vehicles (03614)

    3M Super-Strength Molding Tape, 1/2 in x 15 ft, High Strength Double-Sided Adhesive, Permanently Attaches Side Moldings, Trim and Emblems to Interior and Exterior of Vehicles (03614)


    3M Super Strength Molding Tape is ideal for permanently attaching side moldings and trim to your vehicles, adding long-term protection and value. Use the same elastic bonding technology employed for airplanes and skyscrapers to attach body moldings, trim and emblems to your vehicle. This tape features an extremely strong adhesive, and it’s also easy to use – just pull of the liner and apply.
    Is Discontinued By Manufacturer ‏ : ‎ No
    Product Dimensions ‏ : ‎ 5 x 1 x 5 inches; 0.8 ounces
    Item model number ‏ : ‎ 3614
    Date First Available ‏ : ‎ July 20, 2005
    Manufacturer ‏ : ‎ 3M
    ASIN ‏ : ‎ B002JOVUO0
    Country of Origin ‏ : ‎ USA

    PERMANENT PRO RESULTS: Permanently attaches side moldings, trim and emblems to the interior and exterior of vehicles
    WEATHERABLE: High strength double-sided adhesive withstands weather and impact. Temperature use range is -40F to 250F
    EASY TO USE: Cut, apply, press. That’s it. No tools required. Avoid mess of liquid adhesives
    SUPER CONFORMABLE: 3M VHB tape conforms to irregular and textured surfaces
    BOND WITHOUT RIVETS/SCREWS: Aircraft-grade adhesive strength allows for strong metal to metal bonding without rivets

    Price: $10.61
    (as of Jan 23, 2025 05:48:11 UTC – Details)





    Customer Reviews

    Reviewer: Mike in PA
    Rating: 5.0 out of 5 stars
    Title: 1993 F-150 Body Molding Tape
    Review: The ends of the front quarter panel and door moldings on my 1993 Ford F-150 started to lift. A few years ago I had tried some double-sided tape, and it didn’t perform very well. A more comprehensive search, which included ways to remove the old tape, recommended this tape.I removed the old tape with a wizard wheel attached to my drill and make sure to surface was clean. The application of the state is pretty simple, and I opted to install it on the back of the molding to confirm that it wouldn’t visible after attaching it to the body panel. The bottom line is that the stuff works great. The molding, even though it had some lifting and some areas of stress, now lay flat. I’ll be using this tape going forward should the need ever arise again.

    Reviewer: Bubbarosa
    Rating: 5.0 out of 5 stars
    Title: Sticky Stuff
    Review: This stuff works great. Clean your parts good first though

    Reviewer: Grace
    Rating: 5.0 out of 5 stars
    Title: Really Good Molding Tape:
    Review: I recently purchased the 3M Super-Strength Molding Tape (03616) and I couldn’t be happier with it! I bought this tape to secure some small collectibles on my truck’s dashboard, and it has exceeded my expectations.The adhesive is incredibly strong, holding everything in place without any worries of them falling off while I drive. The 7/8 inch width is perfect for my needs, and the 15 ft length means I have plenty of tape left for future projects.Overall, this tape is easy to work with, and the quality is top-notch. If you’re looking for a reliable molding tape, I highly recommend the 3M Super-Strength Molding Tape!

    Reviewer: Mary
    Rating: 4.0 out of 5 stars
    Title: Super awesome tape
    Review: Used this to repair some trim on my that was loose. Holding the trim firm on the truck, works well. So glad i got this vs cheaper tape.

    Reviewer: Missy
    Rating: 5.0 out of 5 stars
    Title: Strong Enough to Pull Paint Off
    Review: This 3M tape is no joke—super strong and perfect for the job. I used it to reattach the door bumpers on my 2007 Dodge Charger, and it worked. Just a heads-up: it’s so strong that if you’re not careful, it could pull the paint off, so make sure you’re sticking it in the right spot the first time!The adhesion holds up well, even in 100° heat or rain. Definitely a solid choice for trim, moldings, and other car projects. Just don’t underestimate its strength!

    Reviewer: Lin D
    Rating: 5.0 out of 5 stars
    Title: The tap works very well and was easy to use.
    Review: I bought a cute German Shepherd emblem for my Explorer, but within days, the adhesive provided by the manufacturer was left loose. I purchased this tape to adhere to my emblem. It is working great! Just as promised. It’s been through several car washes, rain, and soon snow. I definitely would purchase the tape again.

    Reviewer: Brian Ly
    Rating: 5.0 out of 5 stars
    Title: 3M Super-Strength Molding Tape – Reliable and Strong Adhesive
    Review: The tape holds securely and sticks well . It’s easy to apply, durable, and gets the job done without any mess. The quality is good, as expected from a trusted brand like 3M.

    Reviewer: James H.
    Rating: 5.0 out of 5 stars
    Title: The Superglue of the Gods!
    Review: When I first bought the 3M Super-Strength Molding Tape, I thought, “Sure, it’s just tape. How much damage can I do with that?” Oh, how wrong I was. This tape is basically the Hercules of adhesives. I’ve used it for everything from fixing a loose truck mirror to reattaching the bumper after an impromptu “close encounter” with a rogue shopping cart. If you’re looking for tape that can hold your life together (literally), look no further!Let me tell you, this tape doesn’t mess around. I tried to peel it off just to see if it was as strong as they claim. Big mistake. It’s like trying to wrestle a bear in a phone booth. It stayed exactly where I put it, and let’s just say, my fingers are still trying to recover. I’m pretty sure I’ve bonded with my truck on a molecular level now.The adhesion power of this tape is so intense, I’m convinced it might have a future in the space program. I wouldn’t be surprised if NASA starts using it to keep rockets from falling apart. If you ever feel your life is falling apart, just slap some of this tape on it. I’m not saying it’ll fix all your problems, but at least you’ll have the satisfaction of knowing that your duct tape was in the wrong galaxy.In summary, if you need something to hold your life, your truck, or possibly the entire universe together, 3M Super-Strength Molding Tape is your go-to. Just make sure you’re ready for a permanent commitment – this stuff isn’t coming off without a fight.

    Reviewer: Sergio Vivar
    Rating: 5.0 out of 5 stars
    Title:
    Review: Pega bastante. La compré para sustituir unas pegatinas que se desprendieron. esta sí pegó bien; un soporte de manguera de agua ahí sigue bien pegado después de meses

    Reviewer: Ryan C.
    Rating: 5.0 out of 5 stars
    Title:
    Review: Works well. I’ll wait if it sticks in the cold canadian winter.

    Reviewer: Wingartz
    Rating: 5.0 out of 5 stars
    Title:
    Review: excelente cinta para molduras, su capacidad de adhesión es excelente

    Reviewer: canuckken
    Rating: 5.0 out of 5 stars
    Title:
    Review: I drive an old F150 and the ends of the door molding had curled and would not lie flat. I cleaned the inside of the molding and the doors surfaces with a rag and some gas, let it dry and then used a heat gun to soften the molding, (be very careful if you use this method because it’s easy to heat the molding up to much and melt it), after the molding was more pliable, I applied the tape, held the molding to the door until it became cool and voilà, no more lifted door molding.I recommend this product if you have anything that needs to be stuck to metal, it works fantastic.

    Reviewer: Nicholas Nunn
    Rating: 5.0 out of 5 stars
    Title:
    Review: Kept my car windows up after motor failures in 3 of my doors, on a 20 year old car

  • BOSCH 26A18A ICON Beam Wiper Blades – Driver and Passenger Side – Set of 2 Blades (26A & 18A)

    BOSCH 26A18A ICON Beam Wiper Blades – Driver and Passenger Side – Set of 2 Blades (26A & 18A)


    Bosch ICON makes windshield wiper replacement simple and easy, with 2-pack bundles that include popular driver and passenger side blade length combinations designed to fit specific vehicles. ICON wiper blades feature Bosch’s exclusive fx dual rubber technology that resists heat and ozone deterioration and has proven to last up to 40% longer than other premium wiper blades. The patented ICON beam design features exclusive tension spring arcing technology that creates a fit that’s custom-contoured to the curvature of each side of the windshield, for optimized visibility even under extreme weather conditions. Built-in flexible asymmetric spoiler distributes uniform downward force along the entire length of the wiper blade, holding it firmly to the windshield at higher speeds to prevent lift-off, ensuring a cleaner wipe. Quick and easy installation with original equipment quality hook adapter that is compatible with 9x3mm and 9x4mm hook wiper arms (not compatible with side lock, pinch tab, or top lock wiper arms which require “OE” suffix part numbers).
    Bosch ICON makes windshield wiper replacement simple and easy with 2-pack bundles that include popular driver and passenger side blade length combinations designed to fit specific vehicles
    Exclusive fx dual rubber technology resists heat and ozone deterioration and has proven to last up to 40% longer than other premium wiper blades
    Patented beam design features exclusive tension spring arcing technology, that creates a fit that’s custom-contoured to the curvature of each side of the windshield, for optimized visibility even under extreme weather conditions
    Built-in flexible asymmetric spoiler distributes uniform downward force along the entire length of the wiper blade, holding it firmly to the windshield at higher speeds to prevent lift-off, ensuring a cleaner wipe
    Quick, easy installation with original equipment quality hook adapter that is compatible with 9x3mm and 9x4mm hook wiper arms (not compatible with side lock, pinch tab, or top lock wiper arms which require “OE” suffix part numbers)
    NOTE: Enter vehicle Type, Year, Make, and Model into fit checker above to ensure compatibility – due to wiper arm variations, it is no longer possible to choose replacement wiper blades by length only

    Price: $52.99
    (as of Jan 23, 2025 04:44:18 UTC – Details)





    Customer Reviews

    Reviewer: S Werley
    Rating: 5.0 out of 5 stars
    Title: Expensive but Worth It
    Review: While they are fairly expensive, the sizes (26” and 17”) that fit my particular car cost about $46 (about $20 less here than at an auto parts store). So, if you’re already set on Bosch Icon wipers, then read no further and buy them here. If you’re unsure, then read further. As to the wipers themselves, I am very happy with them. They do an outstanding job, and seem extremely sturdy. Bosch says they last up to 40% longer, and I believe it. They’re heavy-duty. They do an excellent job of wiping away rain and cleaning my windshield and leave absolutely no streaks. I have one disabled arm and nerve damage in that same hand, so I had someone else install them. While they did look a bit tricky to me (the guy doing it had no problem), the type of installation method depends on which type of car you’re installing them on. In other words, all wipers will install the same way for your particular car make and model, so the Bosch Icon should be no more or less difficult than any other brand or model for your particular car. So, if you’re like me and believe in investing in a quality windshield wiper, then I think you’ll be happy with the Bosch Icon. If you’re comfortable installing them or have someone who can do it for you, then I would definitely buy them from Amazon.

    Reviewer: Curtis S Netterville
    Rating: 5.0 out of 5 stars
    Title: Easy to install and super quiet
    Review: Excellent wipers, I would say the best I have ever purchased. Super easy to install, no streaks and super quiet. I hope they hold up well. Time will tell.

    Reviewer: H.P.
    Rating: 5.0 out of 5 stars
    Title: Wiper blades
    Review: Best wiper blades and very easy to install.They work very well and hold much longer as other brands.Made in Europe always better

    Reviewer: DI
    Rating: 5.0 out of 5 stars
    Title: ICON = accurate!
    Review: These windshield wipers, though expensive, work incredibly well and are worth every penny I paid! I would recommend these windshield wipers to anyone, and I will be purchasing them again! They are durable, fit well and do not leave streaks.

    Reviewer: jay g
    Rating: 5.0 out of 5 stars
    Title: Hesitant due to price, but well worth every penny
    Review: I have never purchased an expensive pair of wiper blades that weren’t OEM for any of my vehicles but decided to since I commute so far for work and needed good wipers ASAP – but glad I did. Purchased for my 2018 Camry and has been working amazingly. Usually purchase OEM rubber replacements but couldn’t wait (thank god for prime) since the ones I had were falling apart, plastic wipers scraping on my wind shield. Obviously can’t say they are more durable just yet since just installed, but I would say they perform a tad bit better than OEMs. Easy, no hassle installation, and super eerily quiet whenever it’s on. Would recommend!

    Reviewer: Good replacement for OEM
    Rating: 4.0 out of 5 stars
    Title: Quality
    Review: Much better aftermarket blades than most of the other non OEM counterparts. The quality is good and the price is right. Easy to install.

    Reviewer: Mom
    Rating: 5.0 out of 5 stars
    Title: Excellent windshield wipers
    Review: I bought these for my 2016 Volvo XC70 and they work and fit great. These wipers were a major upgrade over the OEM wipers. There is no streaking and the visibility in the rain and snow is noticeably better. It appeared the seller installed the correct adapter before shipping so installation was simple and quick.

    Reviewer: Terry Field
    Rating: 5.0 out of 5 stars
    Title: Great wipers
    Review: Fit my Jeep Grand Cherokee perfectly. Easy to change after watching a YouTube video on how to do (particularly for the rear wiper blade). Made a huge difference. Much quieter and more effective. Highly recommended!!

    Reviewer: Sisi
    Rating: 1.0 out of 5 stars
    Title:
    Review: Pin clips are cheap plastic that broke in install

    Reviewer: J W
    Rating: 5.0 out of 5 stars
    Title:
    Review: These fit my 2017 pacifica perfectly, they perform well and are very smooth. I haven’t had a heavy rain yet but they have dine well so far with some rainx additive in my washer fluid. I much prefer the clips bosch uses rather than the standard ones that can be tough to get under and remove.These are expensive, but seem to be higher quality so far than all the lower tier brands. Hopefully this means they will last longer.

    Reviewer: Julio César Díaz
    Rating: 5.0 out of 5 stars
    Title:
    Review: Igual o mejor que los originales, me gustaron mucho se ven muy gruesos y resistentes.

    Reviewer: Bluto
    Rating: 5.0 out of 5 stars
    Title:
    Review: I usually buy these Bosch wipers individually at Canadian Tire which cost about 100.00 with tax for the 3.I didn’t know Amazon sold them. I ordered them and they arrived within 3 days and fit my car exactly. Had them on in about 5 minutes. They work fantastic and were 80.00 tax in with free delivery. I will definitely order these again and highly recommend this product for any one with a vehicle.

    Reviewer: Michael Chung
    Rating: 5.0 out of 5 stars
    Title:
    Review: Accurate description, Quick delivery and good product For my car

  • 2PCS Battery Jumper Cable Clamps, Govel Heavy Duty Pure Copper Alligator Clips Jumper Cables Boost Clamp, Car Battery Charger Clamps, Suitable for Car Auto Vehicle Boat (Red & Black)

    2PCS Battery Jumper Cable Clamps, Govel Heavy Duty Pure Copper Alligator Clips Jumper Cables Boost Clamp, Car Battery Charger Clamps, Suitable for Car Auto Vehicle Boat (Red & Black)

    From the brand

    govelgovel

    govelgovel

    jumper clipsjumper clips

    jumper cable clampsjumper cable clamps

    Electric Fuel PumpElectric Fuel Pump

    【Perfect Tools】 The set of Govel jumper cables replacement battery clamps are ideal for replacing, repairing a damaged pair of connectors on an existing jumper cable, or creating custom-length cables.
    【Heavy Duty】 The conductors of the Govel alligator pliers are made of pure copper for good electrical conductivity, the strong jaws teeth of the jumper cables clips will not bend out of shape when squeezed.
    【Parameter Reference】 The red Govel alligator is positive and the black one is negative. Car battery clamps support cable gauge from 2 to 6 AWG. Input: 12V-24V; Rated current: 100-1000 Amp; Weight 15 oz.
    【Widely Use】 These jumper cable clamps are suitable for various battery chargers projects such as voltage tester, all cars and truck batteries, solar panels, camping, boats, electric fences, etc.
    【Attention Points】 Don’t forget to slide the rubber handles over the wires before you secure the wire-ends to the clamps. If you have any questions on use, please feel free to contact us.

    Price: $19.99 – $14.99
    (as of Jan 23, 2025 03:38:26 UTC – Details)





    Customer Reviews

    Reviewer: steve
    Rating: 5.0 out of 5 stars
    Title: nice quality
    Review: excellent product

    Reviewer: TattedSaint
    Rating: 5.0 out of 5 stars
    Title: Heavy duty!!
    Review: These clamps are great. Really heavy duty and strong gripping. My old clamp broke as the housing is plastic. It is part of my car jumper so i wanted to fix it. Man this was easy to replace. I didn’t even use the provided copper thingies that you’re supposed to crimp the wire too. I just removed the old teeth and it fit right into the metal/steel clamp and i was able to screw right in. Didn’t have to mess with anything. Plug and play!! Then i just moved up the plastic sleeve to cover up the handle. Showing a picture of the original black in red to show the difference. I’ll eventually replace the red one once it breaks. I’m pretty stoked on how well these new clamps are. They do feel heavy duty no doubt.

    Reviewer: gerald barron
    Rating: 4.0 out of 5 stars
    Title: The were larger than expecting
    Review: They work great, Seam to be of very good quality. Only time will tell

    Reviewer: V A
    Rating: 5.0 out of 5 stars
    Title: Works perfectly for what I needed
    Review: Bought these to use with my EcoFlow alternator charger. Installed them easily on the existing factory cables and works great! 800 watts, same as max direct wiring and I can use on any vehicle now.

    Reviewer: krug
    Rating: 5.0 out of 5 stars
    Title: Replacement for Jumpstarter
    Review: Used to replace clamps on jump pack. Has worked great so far and fits in clamp holder.

    Reviewer: Craig Bernhardt
    Rating: 5.0 out of 5 stars
    Title: Jaws are well aligned and grab tightly
    Review: Bought these for making my winch connections to a car battery. I made a universal connection cable to connect my winch to any truck or SUV which has a battery capable of sustaining 650 CCA or higher. These clamps fit the bill well. They grab the post terminals tightly and the jaws are in perfect alignment. I’ve noticed cheaper store bought pairs usually have weak clamping pressure and the jaws are usually sloppy. These seem well built.

    Reviewer: Carlos
    Rating: 3.0 out of 5 stars
    Title: Kinda cheap
    Review: Nice clamp force but they deform easily. Negative clamp was wonky after few uses

    Reviewer: Amazon Customer
    Rating: 5.0 out of 5 stars
    Title: Money well spent
    Review: Very sturdy and well made. Great value for the money.

  • Jtron DC12V Racing Car Ignition Switch Panel Carbon Fiber Rocking Switch+Engine Start Push Button with Blue Indicator Light (Blue)

    Jtron DC12V Racing Car Ignition Switch Panel Carbon Fiber Rocking Switch+Engine Start Push Button with Blue Indicator Light (Blue)

    Product Description

    Retrofit switchRetrofit switch

    Retrofit switchRetrofit switch

    JtronJtron About Us

    Jtron is a famous brand that dedicated to providing innovative, cost-effective and quality products. We have been specialized in automotive products and parts for many years. Constant improvement and innovation is our eternal aim. Hope you can purchase with satisfaction here!

    Specifications: Material: Metal & Carbon Fiber Item Type: Combination Switch Panel Dimension: approx. 9.5 * 6.5cm *8.5cm Package Weight: 366g / 13oz

    DC12V Racing Car Ignition Switch Panel Carbon Fiber Rocking Switch (Blue)

    Universal For 12V Power Speediness & Racing Cars

    Multifunction auto ignition switch for racing cars.

    Red illuminated engine start button.

    Easy for installation, Can shut off the power of the whole vehicle in an instant.

    Our driving lives are no longer boring, but full of unlimited fun.

    This start ignition switch is not only suitable for professional racing cars but also avilable for vehicle DIY or other cars.it can be used as auto start ignition switch, brake control, car lamb switch, electrical switches inside or outside of cars, etc.

    What is in the Box: 1 * Blue LED toggle switch with 1 ignition switch 1 Indicator light Black aircraft style cover Racing Switch 5 * Wire 4 * Screw

    12 Volt Button Switch parameters

    Rating 20A 12V DC Contact Resistance 50m ohm Max. Insulation Resistance DC 500V 100M ohm Min. Dielectric Strength AC 1500V 1 minute Operation Temperature -20℃ ~+85℃ Switch Function 3P SPST ON-OFF(LED Blue)

    12 Volt Starter Switch with Red L.E.D parameters

    Rating 50A 12V DC Contact Resistance 50m ohm Max. Insulation Resistance DC 500V 100M ohm Min. Dielectric Strength AC 1500V 1 minute Operation Temperature -25℃ ~+85℃ Switch Function 3P SPST (ON)-OFF (LED Blue) LED Lens Color ∅5 White diffuse VF/IF 3.7V/20mA View Angle 100° Mcd 700 Frame Nylon 66 (94V-2),Black Cover ABS(94HB) Terminals Copper Alloy Actuator PC (94V-2),Blue

    Retrofit switchRetrofit switch

    Blue LED toggle switch with an aircraft style cover With an engine start,can shut off the power of the whole vehicle in an instant.Easy to turn off in emergency from any angle.

    After-sales Service:

    From the Date of Purchase, We Provide 1 Year After-Sales Service for All Products. If the Product is Damaged Due to Transportation or Installation, Please Don’t Hesitate to Contact With me and We Will Send you a new Product for Free.

    Add to Cart

    Add to Cart

    Add to Cart

    Add to Cart

    Add to Cart

    Add to Cart

    Customer Reviews

    4.2 out of 5 stars

    39

    4.2 out of 5 stars

    39

    4.5 out of 5 stars

    112

    4.5 out of 5 stars

    112

    4.5 out of 5 stars

    7

    4.5 out of 5 stars

    112

    Automobile refitting

    Carbon fiber textured panel

    Black panel

    Is Discontinued By Manufacturer ‏ : ‎ No
    Product Dimensions ‏ : ‎ 3.74 x 2.56 x 3.15 inches; 0.01 ounces
    Date First Available ‏ : ‎ August 5, 2018
    Manufacturer ‏ : ‎ Jtron
    ASIN ‏ : ‎ B07GCLF23T

    High Quality Carbon Fiber Face Plate,Durable And Comfortable Touch Feeling
    Blue Engine Start Button With Toggle Switch For Additional Use,Built In Indicate Light In ON/OFF Switch And Start Button
    Cool Gadget,Pre-Drilled Mounting Holes Design Is Convenient For Installing,Mounting Hole Size:5x8cm
    Speeding Racing Style,Give Your Car A Sport And Cool Look
    Can Be Used As An Auto Ignition Switch For Racing Cars & RV;As Starting Switch;Storage Battery Switch;Explosion-Flashing;Chassis Lamp;Fog Lamp;Dome Light;Immediate Electrical Outage

    Price: $24.99
    (as of Jan 23, 2025 02:32:34 UTC – Details)





    Customer Reviews

    Reviewer: chelsi egger
    Rating: 5.0 out of 5 stars
    Title: Truck toy!!
    Review: My son loves the easiness of the button. It was easy to install. And got it at a great value.

    Reviewer: Rich McConnell
    Rating: 5.0 out of 5 stars
    Title: Nice addition
    Review: I got a Bobcat S150 skid steer from the US Army and it had a push button start, which was had a short in the rocker switch and the push button. I went with this set-up (cheaper fix) instead of putting a key switch back into it., I like having the lights to help identify there is power to the switch and aloowing you to know it was left on. If you have a basic knoweledge of reading schematics and electricity is easy to install. I modified the skid steer switch panel a little for installation and end up using rivets instead of the cheap little break screws that came with it.

    Reviewer: Lance Peterson
    Rating: 4.0 out of 5 stars
    Title: Ok
    Review: No instructions on installing

    Reviewer: Juan L. Sanchez
    Rating: 5.0 out of 5 stars
    Title: Decent switch, but needs to be reinforced
    Review: The switches are of decent quality. The carbon fiber weave isn’t really gonna fool anyone but looks good regardless! I did solder on replacement wires however, and I also added loctite to the nuts so as to make them more secure.

    Reviewer: Juan P.
    Rating: 5.0 out of 5 stars
    Title: La valiósus
    Review: Sus características y lo practico

    Reviewer: Jadon s
    Rating: 3.0 out of 5 stars
    Title: Kinda cheap
    Review: The wire for the light fell off after first day and can’t soder back in how it is set up but still installed then the button went out within a month of driving took apart the little spring holder broke what makes connection to start ordered another will see how long it last

    Reviewer: Amazon Customer
    Rating: 5.0 out of 5 stars
    Title: Good quality switch…
    Review: Nice switch… diff from the normal on my hot rods. Uniquely looking.

    Reviewer: Will Kern
    Rating: 1.0 out of 5 stars
    Title: Start button sticks and destroyed my starter
    Review: Put this in my project foxbody due to solenoid failure and the start button sticks sometimes. That’s bad enough, but yesterday it must’ve been halfway pushed because when I came back to my car the started was fried to a crisp, the start button was lighting up like it was trying to start, and I had to change a starter in my work parking lot. I should’ve taken a picture of the crispy starter but will include a video of it sticking when I get around to it. Unless its just mine that is defective, DO NOT BUY THIS SWITCH PANEL

    Reviewer: Martin janssen
    Rating: 4.0 out of 5 stars
    Title:
    Review: Great price, i think the life expectancy will be short though. It does work well though

    Reviewer: Matt W.
    Rating: 2.0 out of 5 stars
    Title:
    Review: not bad quality, however the LED on the switch failed almost immediately, other than that. great product

  • 1.75-Amp Car Battery Charger, 6V and 12V Smart Fully Automatic Battery Charger Maintainer, Trickle Charger, Battery Desulfator for Car, Lawn Mower, Motorcycle, Boat, Marine Lead Acid Batteries

    1.75-Amp Car Battery Charger, 6V and 12V Smart Fully Automatic Battery Charger Maintainer, Trickle Charger, Battery Desulfator for Car, Lawn Mower, Motorcycle, Boat, Marine Lead Acid Batteries

    Product Description

    0101

    6V/12V Car Battery Smart Lead-acid Battery Charger and Maintainer

    Trickle ChargingVisualized ChargingPulse Repair 7- Stage chargingAutomatic ChargingMaximizes Battery LifeSafety Charging ProtectionFor Charging AGM, GEL, SLA and Wet Batteries

    ***Updated Version***

    When the charger is in Trickle mode, it will monitor the voltage of battery even though the screen is showing OFF, once the voltage drop under 12.5 Volts, the charger will automatically turn back on and charge it to full and maintain the voltage as normal. Force 12V mode: If the charger accidentally recognizes the 12V battery as a 6V battery (for example, the power of 12V battery is less than 6 Volts), you can press and hold the Mode button for 5 seconds, and the charger will be forced to switch to the 12V charging mode.

    11

    0303

    0404

    NEXPEAK 1.75-Amp Battery Charger

    Suitable for cars, trucks, motorcycles, lawn mowers, motor boats, tricycles, electric vehicles, SUV, marine, etc

    NOTE:

    This battery charger is not compatible with lithium-ion batteries.

    Only can repair slightly damaged batteries not a dead battery

    PACKAGE: 1 x Battery Charger & Maintainer – 1 x Alligator Clips for an alternate connection – 1 x Ring Terminal Harness 1 x User Manual

    0505

    7-Stage Automatic Charging

    The battery has seven-stage charging during the entire process. Smart Maintainer automatically maintains the battery level without user intervention.

    0606

    Pulse Repair Function

    Built-in advanced battery REPAIR mode to help to recover old/idle batteries and extend battery life.

    0707

    Safety protection

    NEXPEAK automatic smart battery charger owns safety technology, battery chargers constantly monitor battery status to avoid overcharging.

    0808

    Add to Cart

    Add to Cart

    Add to Cart

    Customer Reviews

    4.5 out of 5 stars

    3,401

    4.5 out of 5 stars

    1,515

    4.4 out of 5 stars

    169

    4.6 out of 5 stars

    124

    Price

    $20.95$20.95 $39.98$39.98 $51.29$51.29

    Packing Quantity
    1 2 3 4

    Charging Current
    1.75 Amp(Max,±5%) 1.75 Amp(Max,±5%) 1.75 Amp(Max,±5%) 1.75 Amp(Max,±5%)

    Battery Voltage
    6V & 12V 6V & 12V 6V & 12V 6V & 12V

    Multi-Stage Charging
    7- Stage charging 7- Stage charging 7- Stage charging 7- Stage charging

    Pulse Repair

    Multi-Safety Protection

    【Battery Charger, Maintainer&Desulfator】An compact size portable 4 in 1 battery charger, battery maintainer, trickle charger, and battery desulfator. Perfect for all types of 6-volt and 12-volt lead-acid automotive, RV, powersport, and deep-cycle batteries, including flooded, gel, AGM, SLA, VRLA and maintenance-free batteries, suitable for cars, golf carts, motorcycles, boats, lawn mowers, marines, ATVs, UTVs etc.
    【Visualized Charging with LCD Screen】The intelligent digital LCD screen clearly and visibly displays the charging status, charging percentage and voltage, charging current, etc. Always know how your battery charging is working.
    【Pulse Repair to Restore Your Battery】Built-in advanced battery REPAIR technology, helps to restore the old/idle batteries lost performance and extend battery life. 7-stage charging program (desulfurization, trickle charging, constant current charging, constant voltage charging, battery current detection, compensation charging, Floating charging).
    【Plug it and forget it & Trickle Charging】STD mode will automatically cut-off power after fully charged while trickle model will enter trickle charging and maintain your battery voltage at 12.5V. All around protection including short circuit, overload, low-voltage, high-voltage, overcharge, over-temperature, reverse-connection and over-current protection makes it really plug it and forget it.
    【What You Get】 2 Year 100% SATISFACTION SERVICE. Extra long 6.6ft SAE standard cord with detachable alligator and ring connectors. Press and hold the MODE button for 5 seconds, and the charger will be forced to switch to 12V charging mode. If you are not pleased with the product, please contact NEXPEAK directly for hassle-free return and refund.
    ***The charger will lock in the current mode during a power outage and automatically restart into trickle charging mode or standard mode after power is restored. The charger supports long-term charging, so you don’t have to worry even if you go out for several months.

    Price: $20.95
    (as of Jan 23, 2025 00:01:38 UTC – Details)





    Customer Reviews

    Reviewer: Danger zone
    Rating: 5.0 out of 5 stars
    Title: Trickle charger
    Review: It does exactly what it promises. Maybe not as fast as it promises but it gets the job done and is compatible with every battery I attached it to so far. It seems pretty durable it has an awesome design easy to use It keeps the battery charged and has a lot of value for the money. Don’t settle for a non-durable battery charger that is going to leave you drained in uncharged like my boss does.

    Reviewer: Jaxx
    Rating: 5.0 out of 5 stars
    Title: The best charger, with exactly what you need in a small package.
    Review: This little charger is fantastic! It’s a 1.75A charger that out performs my larger old trickle charger. It’s a smart unit with an easy to read display. (One thing to note: it will specifically NOT work for LiFePO4 batteries. This will NOT do the charging profile required for ONLY those batteries, But it works VERY well for AGM and standard batteries.)I bought it to use the de-sulfate feature on some old UPS batteries, but they were too far gone. However, I’ve used it on my Harley battery as a regular charger and it’s been strong and reliable. It starts out as a regular charger, then shuts off when the battery is full, then automatically goes into trickle mode as it needs to.It’s got a great feature in that it displays what it’s doing. The display toggles back and forth showing the exact volts and amps it’s putting out as well as the graphical display of the battery filling up.It’s a “set up and leave it go” thing that will shut down when the battery doesn’t need it or it will turn back on when it’s needed.Recently my truck battery was too low to turn it over so I connected this charger. I like the voltmeter display. It showed 11.2v before I plugged it into the wall. Once plugged in, this unit displayed exactly what it was doing and had me up and fully charged over night.The next day I did notice that when I moved the cord at the connection, the screen went dark. I surmised that there are broken wires in the SAE plug. I contacted the seller asking for a new SAE plug to solder on, and they wrote back overnight that they are sending me an entire new unit! What great customer service!This is a great little charger that does all that I need backed by a company with great customer service!

    Reviewer: S. E. Mellema
    Rating: 5.0 out of 5 stars
    Title: Compact Charger
    Review: Great charger, instructions are very small print; hard to read. The unit is easy to operate and works well. Great price, too. Shipped very quickly, hope it is well-made, time will tell.

    Reviewer: E Martin
    Rating: 4.0 out of 5 stars
    Title: Good battery charger, tested all functions and they work as expected.
    Review: Edited on Sept 2, 2022:Nexpeak contacted me in regards to my battery charger issue that I was having as noted below. They provided a replacement charger to me as they had not received any prior complaints in regards to the trickle charge mode not coming back on once the battery voltage dropped. I tested the replacement battery charger functions and found that the replacement does work correctly, the trickle charge mode turns the charger “off” once the battery is fully charged at approximately 14.8 volts, I loaded the fully charged battery to draw the voltage down and found that the replacement charger turns back on and starts trickle charging again once my voltage dropped to approximately 12.1 volts.I was surprised that Nexpeak contacted me with concern that their charger did not work properly for me, this shows that they do care about their products and their customers.I have raised my rating from one star to four stars, primarily for the customer service received by Nexpeak, I deducted one star for the original faulty charger that I received.My original review on Aug 21, 2022:My charger does not work as advertised, I tested each function over the past week on a known good battery. The charge and the repair function work fine, my issue is with the most critical function of this charger which is the maintain/trickle mode.Once the battery reaches a full state of charge the maintain/trickle function shuts the charger OFF despite what it states in the directions. I suspected that the charger may be monitoring the state of charge on the fully charged battery and would come back on once the battery voltage dropped to a specified voltage range but it does not! I used my load tester to drop the battery voltage (after my charger shut off in maintain/trickle mode) and the charger NEVER came back on to sustain a state of charge in my battery (I load tested my fully charged battery down to 11.5 volts an this charger never came back on!).Not having a slow charge maintain/trickle mode that works correctly is a no go for me as I planned on using this battery charger to maintain the battery on our wave runner during the winter. Using this charger for any length of time in maintain/trickle mode may leave you with a dead battery!!

    Reviewer: Samella Racquel Cummings
    Rating: 5.0 out of 5 stars
    Title: Trickle charging.
    Review: What I like with this charger, it tells you if your battery wants to be repaired, if it is actually good and then it performs it’s magic. it’s a good investment. It is small but mighty.

    Reviewer: ManlyShopper
    Rating: 5.0 out of 5 stars
    Title: Works great
    Review: Works great and a great value. I had a car sitting in my driveway for about 6 months. I left it trickle charged and the battery never lost juice.

    Reviewer: Pete & Beth
    Rating: 5.0 out of 5 stars
    Title: Works fine
    Review: Our Chrysler convertible is a summer car that sits in the garage all winter long. The battery tends to discharge over time. I leave this trickle charge on it and it keeps the battery at an optimal level.

    Reviewer: courtney t.
    Rating: 5.0 out of 5 stars
    Title: A very effective and easy to use car charger
    Review: A very handy charger to have around when needed, probably not suitable for commercial use but is great for occasional home needs.

    Reviewer: Marilyn
    Rating: 5.0 out of 5 stars
    Title:
    Review: Bought this to keep the battery in premium condition for the car I have in storage for the winter. So far, seems to work perfectly. The battery had been in storage for about 1 month. The unit, on Trickle setting, brought the battery to full then turned off as the manual indicated. I’ll update with an image if I can catch it activating to keep the charge at optimal rate.

    Reviewer: ujjwal bhardwaj
    Rating: 5.0 out of 5 stars
    Title:
    Review: Like it workd good.

    Reviewer: masterxyz
    Rating: 4.0 out of 5 stars
    Title:
    Review: easy to use, easy to charge. the repair mode did not work on my old battery through.

    Reviewer: PP
    Rating: 5.0 out of 5 stars
    Title:
    Review: The device is sufficiently small to let it sit under the closed car hood while charging the battery. Very practical if you need to charge your car battery with the car parked outside the garage.It is also small enough to be packed away in the car to take it along on trips.I was very pleased and surprised to be able to repair our old car battery that had died completely during several nights of -13°C cold nights after not having used the car for a week.At first I tried my jump starter to start the car and it failed. Then I bought and I tried this battery charger in Regular Charge Mode and it could not charge the old battery. The I tried this battery charger using its Battery Repair Mode and after half a day the battery was charged to Full which was impressive to see.I have had no problems with the same old car battery after the Repair Charge. Highly recommended.

    Reviewer: Jam
    Rating: 5.0 out of 5 stars
    Title:
    Review: Having already owned a trickle charger I bought this one with the intention of having the ability to always charge my car with the quick connect SAE charger I purchased this item using the battery adaptor and then I bought a 50ft SAE extension cord. And now I’m able to charge my battery from the furthest part of my driveway. The smart charger is very convenient due to the fact that it shuts off when the battery charging is full, which makes it convenient for me specially, during winter time because I had just changed my car stereo and it sucks up a lot more battery now.

  • Car Truck Van Scissor Lift Jack Crank Handle, Car Steel Tire Wheel Lug Wrench Scissor Jack Crank

    Car Truck Van Scissor Lift Jack Crank Handle, Car Steel Tire Wheel Lug Wrench Scissor Jack Crank


    Feature:
    Diameter: approx 8mm
    Structure: Folding
    Starting weight:2T
    Surface treatment: color zinc plating
    Color: Metallic color body with yellow handle
    Suitable For: Car Scissor Jack Lifter with single hole
    Item included: 1 x Crank handle (the scissor lift jack is not include)
    How to maintain it?
    -Always keep jack clean and keep the screw and bearings well lubricated.
    -When jack is not in use,the two parts of Crank handle should be closed together state,folding storage.
    Note:
    1) Due to the different measurement methods, the size may have 1-2cm error,please understand.
    2) Color may vary slightly due to the color setting of each individual monitor,please understand.
    3) This item must to use the safe vehicle jack, can enter the vehicle operation,it be not allowed direct enter the bottom of car operate.

    Made of Stainless Steel body and plastic handle.
    .Compatible: for car Scissor Jack Lifter with single hole.
    .Rust resistant,long lasting and durable construction.
    .Perfect for travel use and emergency wheel,tyre changes..etc.
    .Simple design easy to use,easy to operate using the chromed crank with speed handle.

    Price: $8.57 – $7.55
    (as of Jan 22, 2025 22:55:18 UTC – Details)





    Customer Reviews

    Reviewer: David Simmons
    Rating: 5.0 out of 5 stars
    Title: Good OEM replacement for cheaper price
    Review: When my car jack part bent up and rendered itself non-usable, I replaced it with this item and it so far has held up nicely. Works better than my OEM jack part, tucks away nicely in my car, and all for only a fraction of the price. Highly recommended

    Reviewer: Juan Martinez
    Rating: 5.0 out of 5 stars
    Title: It was what expected
    Review: It was what expected

    Reviewer: B. Morajka
    Rating: 5.0 out of 5 stars
    Title: Works!
    Review: This is my husband’s, he asked for it. He said it works just fine on the car. If he doesn’t complain then I guess it’s a good product!

    Reviewer: Houbergt
    Rating: 4.0 out of 5 stars
    Title: Bueno
    Review: Me agrado

    Reviewer: Amazon Customer
    Rating: 5.0 out of 5 stars
    Title: Great
    Review: Did not tasted yet, but looks okey

    Reviewer: icewoman
    Rating: 3.0 out of 5 stars
    Title: Small and awkward to use
    Review: I needed something right away, this will work for now. But I am going to look for something stronger and easier to use.

    Reviewer: bcsmith
    Rating: 5.0 out of 5 stars
    Title: fit just fine
    Review: did the job makes jack go up and down

    Reviewer: Kingskid-EPC
    Rating: 5.0 out of 5 stars
    Title: Just what I needed
    Review: The one I had in my car broke. I got this 2 days after placing the order and it was at a fantastic price. It is just like original equipment.

    Reviewer: Omkar Singh
    Rating: 1.0 out of 5 stars
    Title:
    Review: Very delicate and small item for the jacking purpose. Surprised to see its rod thickness and size. Please double check it’s dimensions before ordering this item and do not confused and presume your own by its photos shown in the description. Not recommended.

    Reviewer: Nirjhar Ghosh
    Rating: 2.0 out of 5 stars
    Title:
    Review: Very small and barely useful. Your original car handle is better.

  • ACDelco Gold 213-4514 (19236568) Engine Coolant Temperature Sensor

    ACDelco Gold 213-4514 (19236568) Engine Coolant Temperature Sensor


    ACDelco Professional Engine Coolant Temperature Sensor is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket sensor is manufactured to meet or exceed your expectations for fit, form, and function.
    Professional, premium aftermarket replacement
    Provides the performance and dependability you expect from ACDelco
    Manufactured to meet expectations for fit, form, and function

    Price: $22.95
    (as of Jan 22, 2025 21:47:30 UTC – Details)





    Customer Reviews

    Reviewer: Nathan A. Hickman
    Rating: 5.0 out of 5 stars
    Title: Perfect fit, EZ install
    Review: Fits my 2007 Chevy Equinox perfectly. I suspected the old one was bad due to a “Engine Hot, turn off AC” message after a coolant change. Replaced this, the thermostat, and bled the system from the coolant bleeder above the water pump. Not entirely sure if the old one was bad, but this one works perfectly. It comes with sealant on the threads. Last get ready for a little coolant to come out so be ready to get this in right when the old one comes out to cut down on the mess.

    Reviewer: Joel Hammer
    Rating: 5.0 out of 5 stars
    Title: Works well. Some tips on doing a 2007 Saturn ION: UPDATE P0118 code now
    Review: I think my first review was lost, so, here is my experience with a 2007 Saturn Ion. I followed the book. The stuff on U-tube wasn’t very helpful.1. Remove splash guard.What splash guard and why? First, I got out the jack and the mounting stand, and jacked up the left side of the car. This will involve unloading all the junk in the trunk. I thought I would be getting to the sensor from below. Not possible. I removed the long splash guard that runs under the entire radiator. Four push pins. Just pry out the central pin of each push pin with a screw driver and pull out the external piece. Trouble was, the two center push pins were installed “backward.” Had to push the pins out with a screwdriver, but the radiator above the guard didn’t have the clearance for the pin to clear the opening. This was a big pain. Remove the two end push pins first to get some play in the splash guard.2. Removing the splash guard did nothing useful, as access to the drain plug for the radiator was not helped at all. Access to it is from the passenger side from outside the car. It opens behind the radiator. It is designed for finger use but there is no way to get a good grip on it. The right side wheel splash guard and the radiator rubber mount block access. Removing the mounting bracket was no help. Had to push it with a screw driver or something.3. As the antifreeze comes out, it it will fall onto the radiator mounting bracket, making a very messy irregular stream. The book said attach a plastic hose to avoid splashing. Don’t see how that is possible. A small funnel with a plastic hose on it might do the trick. Wear safety goggles. When you open the cap on the expansion reservoir the stream will increase in volume and likely change course. Be prepared for a mess. Have a lot of water available to wash away and dilute the spilled antifreeze.4. Remove the engine cowl. That is done by removing the oil fill cap, then pulling up on the cowl. There are two push connectors, one in back on the passenger side, the other in front.Try to keep dirt from falling into the oil filler opening.5. The sensor is behind the engine, low, on the driver’s side. Access to it is only possible by standing in front of the engine, and using your left arm, reach behind the engine. I hope you have long arms. And, your arms aren’t too big around.6. You have to raise the prong or pin on the plastic housing to slip it off. The clip points towards the engine, so you just raise it up and pull the housing off, with one hand. I tried to raise the pin up with a screw driver, to at least loosen it up. The orientation of the housing will be crucial. The pin might be facing to the left or right or up or down (where you can’t see it.)Mind was facing away (to my right, with my arm coming from the left). After a lot of frustration I was on the verge of giving up when finally I managed to get the housing off with the fingers of my left hand.7. I used a sparkplug socket to unscrew it (3/4’s inch). It was almost too big too fit in the available space, which is to the left and below the sensor as you turn it. A ratchet wrench is essential, since there is almost no room to work.8. The sensor was not torqued very tight.Installation is the reverse of the above. A mirror is very useful to see the hole which you put the connector into. With the teflon wrapping on the sensor threads, it screws in with mild resistance even when very “loose.” I tightened it until it got very difficult to turn, which happened in the space of 1/2 turn or so. When I was done, the connecting pin was completely hidden from view, as it was facing downwards. I wanted to have that pin facing to the left for easy removal next time. I pity the next guy who does this job on this car.I refilled the antifreeze and all. The next day I got a low coolant error, since I had lost enough coolant from the irregular stream noted above.Of interest, the check engine light still came on for a day after replacing the switch although the engine temperature gauge was working.I spent upwards of four hours on this, believe it or not. Still not done, as I have to clean up the mess in the garage and put the spare tire and jack back into the care, since I was called away to work just as I got the job done.But, hey, $10.00 is a steal.So, what would I do differently next time?1. Forget the jack and the splash guard stuff.2. Have a small open ended 3/4’s inch wrench to turn the sensor to get the connecting pin on the harness pointing in a direction it is easy to get to.3. Don’t bother draining the radiator. Put a big pan beneath the sensor to catch the antifreeze and work fast.Doing the above would have made this 4 hour job into a 30 minute job.================================UPDATE Oct 30, 2015A couple of days after fixing this problem the check engine light came on. The error code was P0118 this time, which indicates a short circuit or bad connection in the ECT circuit. The coolant temperature was reported correctly, so this is an “intermittent” problem. I reset the error code and several days later all is well.=========UPDATE Nov 2, 2016=====Still working. Still with rare,intermittent error codes.=========UPDATE May 21th 2017===========The symptoms were now the temp gauge reading zero, the check engine light on, and the radiator fan going constantly, similar to what I have experienced off and on for a year or more. . The error code was P0128, engine not reaching thermostat regulating temperature. This problem was erratic. Using a OBD reader, the temperature reported to the PCM was about 160-180 degrees, just below the thermostat open setting. Turns out with this code the PCM turns off the temp gauge and runs the fan constantly, I assume because the PCM isn’t trusting the ECT data. Replacing the thermostat fixed the problem.I wonder if the original problem was related to the thermostat and not the ECT sensor? The thermostats routinely wear out. They should be replaced anytime your car seems to be colder in the winter than it used to be.

    Reviewer: Ardy
    Rating: 5.0 out of 5 stars
    Title: Perfect fit for our Silverado, Great Product and easy to install!
    Review: Great Product, Works Perfect for our needs and easy to use.

    Reviewer: Teri A. Lundy
    Rating: 5.0 out of 5 stars
    Title: Wroked
    Review: Working for me. Easy to I install.

    Reviewer: Rich Sanz
    Rating: 5.0 out of 5 stars
    Title: 2006 Chevrolet Equinox LT AWD 3.4L
    Review: Works as intended. It has been 4 years since I replace the old one with this one and it is still going. Florida winters and summers.

    Reviewer: james benton
    Rating: 4.0 out of 5 stars
    Title: PROPER FIT 👌
    Review: Reasonable price and match parts.

    Reviewer: Chuckles
    Rating: 5.0 out of 5 stars
    Title: Worked great on a 2008 Saturn Vue 2.4L, need a 19mm extra deep socket!
    Review: Once I found the right socket (19mm extra deep socket).To clear the connector, It needed to be about 1 1/2″ deep.Wish I knew that, before I started.I used a Lowes/Kobalt 19mm socket 1/2″ drive (part # 337731).They sell the individual sockets in the drawer near the sets.Good luck, hope this helps.

    Reviewer: AmazonCustomer sinceinception
    Rating: 5.0 out of 5 stars
    Title: Ultra easy!
    Review: Finally a repair that’s easy! My old one the plastic plug broke. Unscrewed it and screwed this one in! Plug in and good to go!This also fixed my hard start problems as well as no engine temp and engine light.I love that the threads come with thread locker and it’s in a sealed bag. And I love that my truck runs great.On the 6.9 this is on the driver’s side above exhaust manifold!

    Reviewer: Marc
    Rating: 5.0 out of 5 stars
    Title:
    Review: Genuine GM sensor in GM packaging. Arrived quickly and was a good price. Perfect fit for my Gen IV LS swap with X Max engine harness.

    Reviewer: Quedo muy bien en mi yukon 2003 5.3 quedo exactamente
    Rating: 5.0 out of 5 stars
    Title:
    Review: Quedo muy bien en mi yukon 2003 5.3

    Reviewer: Tim Shaffstall
    Rating: 5.0 out of 5 stars
    Title:
    Review: Got here in great time

    Reviewer: Alberto M.
    Rating: 5.0 out of 5 stars
    Title:
    Review: Sin problemas

    Reviewer: Stephane Lacerte
    Rating: 5.0 out of 5 stars
    Title:
    Review: Très bon !!!

  • MITZONE Upgrade Aluminium Thermostat Housing Assembly Compatible with 2011-2021 Jeep Dodge RAM Chrysler 3.6L 3.2L V6 Vehicles – 200 Town & Country Avenger Grand Caravan Cherokee

    MITZONE Upgrade Aluminium Thermostat Housing Assembly Compatible with 2011-2021 Jeep Dodge RAM Chrysler 3.6L 3.2L V6 Vehicles – 200 Town & Country Avenger Grand Caravan Cherokee

    From the brand

    Aluminum Coolant Thermostat Housing Assembly Aluminum Coolant Thermostat Housing Assembly

    Compatibility 1: MITZONE upgraded aluminum coolant thermostat housing assembly compatible with 2011-2014 Dodge Avenger 3.6L, 2011-2020 Dodge Grand Caravan 3.6L, 2011-2019 Dodge Journey 3.6L, 2014-2021 Jeep Cherokee 3.2L
    Compatibility 2: MITZONE upgraded aluminum coolant thermostat housing assembly compatible with 2012-2015 Ram C/V 3.6L, 2014-2021 Ram ProMaster 1500 2500 3500 3.6L, 2011-2017 Chrysler 200 3.6L, 2011-2016 Chrysler Town Country 3.6L
    Function: The engine coolant thermostat and housing assembly helps regulate the engine’s operating temperature by controlling the flow of coolant.It ensures optimal cooling efficiency and engine performance, protecting your vehicle from overheating
    Includes: Aluminum thermostat housing, thermostat, gasket, screw. Opening temperature: 95 ℃
    Purchase with confidence: If you are not sure about the vehicle fitment or any questions or concerns, please message us via amazon. We will resolve the issue to meet your satisfaction

    Price: $21.59
    (as of Jan 22, 2025 20:44:22 UTC – Details)





    Customer Reviews

    Reviewer: Todd Depczynski
    Rating: 5.0 out of 5 stars
    Title: Solid upgrade for the 3.6L Pentastar
    Review: This MITZONE Upgrade Aluminum Thermostat Housing Assembly is a fantastic replacement for the original plastic unit on my 2013 Chrysler Town and Country. I replaced the factory one with a Dorman unit at 120,000 miles, but unfortunately, it failed at 207,000 miles.This aluminum housing is a significant improvement. The most notable upgrade is the inclusion of a bleeder valve. The plastic valve on the previous unit felt flimsy and didn’t seem to seal properly.I highly recommend this upgrade. Don’t hesitate, buy it! It costs only a few dollars more than the cheaper plastic options and offers significantly improved durability and functionality.

    Reviewer: Robert W. Sterba
    Rating: 5.0 out of 5 stars
    Title: Thermostat with Housing for 2011 Chrysler Town and Country.
    Review: I was astonished to see that the OEM thermostat housing was plastic. This thermostat housing was aluminum, and it matched the plastic one perfectly, and was fairly easy to install, although that bottom bolt on the housing was a bear to get to. Part fit perfectly and so far there are no leaks, and the check engine light, for low coolant temperature, reset itself. Obviously the old thermostat was stuck in the open position and wouldn’t let the engine get warm enough.

    Reviewer: Peter
    Rating: 5.0 out of 5 stars
    Title: Perfect fit, works well
    Review: Works well so far. installed yesterday with few difficulties not related to the product. Seems to have fixed the problem it was meant to. The aluminum body inspires more confidence in longevity.

    Reviewer: ATVDUDE
    Rating: 5.0 out of 5 stars
    Title: Great for the cost
    Review: I like that it’s all metal and not plastic. It is not hard to install but you must “burp” the coolant system or you will overheat due to air bubbles being trapped in the system. I did not change out the internal stat and it is working correctly. I am not seeing any overheating issues.

    Reviewer: thomas badgett
    Rating: 5.0 out of 5 stars
    Title: Awesome thermostat replacement
    Review: Bought this for my wife’s 2015 wrangler with the 3.6 Pentastar engine. Fit like factory and should have been the factory housing from the beginning.

    Reviewer: Lonnie
    Rating: 4.0 out of 5 stars
    Title: Good quality part
    Review: Quick delivery. Good quality part. Would buy again. Great value. The part fit my vehicle perfectly.

    Reviewer: Wasper
    Rating: 5.0 out of 5 stars
    Title: Fits my 2014 Grand Caravan Ram CV 3.6 L v6
    Review: This review is for the: MITZONE Upgrade Aluminum Thermostat Housing AssemblyMy car did not overheat or fail to cool the engine. It actually was not getting hot enough. I had an engine alarm show up do I went to my usual repair shop, T&J Service, which is just maybe four miles from my home. I told Tim about the alarm, so he came right out with the analyzer, hooked it up and it showed that the engine did get up to full running temperature. We figured it was the thermostat sticking open and I’d have to get that replaced.I didn’t care for the OEM replacement parts that were available for my Ram CV as they were plastic housings. One of the ‘how-to’ repair videos on YouTube showed a guy getting the old unit out and he broke the plastic housing trying to remove the heater hose. I was concerned that it might break on install as it’s only plastic, so I ordered this aluminum model.It fit like a glove, and I had no problems installing the MITZONE Upgrade Aluminum Thermostat Housing Assembly. It actually took less time than it did to get all the parts off that I needed to in order to install the thermostat.The included photos show the following:1st shows temp gauge at cold start;2nd is temp gauge at thermostat opening and heat starts to flow into the cab area;3rd is where the old thermostat stayed open and didn’t allow more water temp than that;4th is where the new MITZONE Upgrade Aluminum Thermostat Housing Assembly allows the water temp to run now;Before I was getting heat, but I could hold my hands directly in front of the vent on full heat no problem.Now I CAN NOT hold my hands there as it is way too hot for them.Heats my car up nicely now and no more low running temp alarms!I definitely recommend the MITZONE Upgrade Aluminum Thermostat Housing Assembly if your 3.6L Dodge needs a replacement over the plastic housing.

    Reviewer: John P Shannon Jr
    Rating: 5.0 out of 5 stars
    Title: Functions like the factory t-stat
    Review: This thermostat looks, fits, and functions like the factory one except it’s aluminum.My original must have worn out. The heat didn’t work well even though the coolant was full and flowing. This thermostat fixed my heat issue.

    Reviewer: Jose
    Rating: 5.0 out of 5 stars
    Title:
    Review: Buen producto, se ve de buen material y correcto para el auto que lo ocupo.

    Reviewer: astuteshopper
    Rating: 5.0 out of 5 stars
    Title:
    Review: Bought one for each of my two dodges. Original stat and plastic replacements would open at 98-99 celcius and occasionally over 100. Replaced with theis type. Opens at 88 consistently. No malfunction no sticking and no overheating. So far so good! Been almost a month now. Part seems well made. Oem should be like this.

    Reviewer: Adam
    Rating: 5.0 out of 5 stars
    Title:
    Review: Very good better than mopar

    Reviewer: Semble correct pas utilisé encore
    Rating: 5.0 out of 5 stars
    Title:
    Review: Durango

    Reviewer: VICTOR
    Rating: 5.0 out of 5 stars
    Title:
    Review: La refacción original de mi vehículo es de plástico, al cambiarlo por el material actual mejor notablemente la durabilidad

  • ATP Automotive AT-205 Re-Seal Stops Leaks, 8 Ounce Bottle

    ATP Automotive AT-205 Re-Seal Stops Leaks, 8 Ounce Bottle


    AT-205 Re-Seal is a fast, effective and safe stop-leak for all rubber seals and gaskets. The exclusive formulation restores worn or dried out seals and is not harmful to internal bearings and components. 
    Is Discontinued By Manufacturer ‏ : ‎ No
    Product Dimensions ‏ : ‎ 7 x 4.5 x 4 inches; 1.76 ounces
    Item model number ‏ : ‎ AT-205
    Date First Available ‏ : ‎ July 7, 2004
    Manufacturer ‏ : ‎ ATP
    ASIN ‏ : ‎ B000NVW1LM
    Country of Origin ‏ : ‎ USA

    Professional strength fast acting resealer, stops leaks fast
    Rejuivinates all rubber seals & gaskets in engines, transmissions, power steering, differentials and hydraulic systems
    Compatible with conventional and synthetic oils, ATF, gear oil, power steering fluids and hydraulic oil
    Does not contain petroleum distillates, will not over-swell or breakdown seals
    8oz bottle will treat a 6 quart capacity, adjust accordingly

    Price: $23.73 – $20.23
    (as of Jan 22, 2025 19:32:20 UTC – Details)





    Customer Reviews

    Reviewer: Sik of Amzn Revws
    Rating: 5.0 out of 5 stars
    Title: IT IS NOT SNAKE OIL It worked for me w/significant rear main seal leak
    Review: I developed a significant rear main seal leak on a 2004 Chevrolet Suburban. This is after I used synthetic oil. (I thought this was no longer an issue with synthetic , but there is no other explaination for the leak). I really did not have any confidence that this product would work. It did have great reviews and I figured it was worth a try but as much oil that was literally dripping as I entered my driveway in the puddles underneath SUV after parking it I had my doubts. As the instructions indicate you need to drive it about 500 miles. After 500 miles I still had a bit of a leak but it was much improved. I did not change out my oil at this time I left the additive in and then after approximately 2,000 miles, there is no trace of any oil leak! This stuff worked wonders for me. No more oil loss.

    Reviewer: Prof Daddy
    Rating: 5.0 out of 5 stars
    Title: I highly recommend this product. It saved me more than $4200 fixing oil seal leaks.
    Review: I bought a used Tundra with 140K miles on it that I knew had a leaking rear main seal. It was a $1000 repair if you get a really great deal. I ended up getting the truck for a really good price and was prepared to get the rear main seal fixed. I ended up putting it off and it was going through a bout a quart of oil in 5000 miles. I wasn’t worried. Some German cars tell you going through a quart every 800 miles is normal. WTF?My old truck had the transmission go out on the road and I had to get it rebuilt by AAmco. They convinced me to replace the rear main seal while the transmission was out even though it wasn’t leaking. I continued my trip, had the transmission checked out as required. I was informed then that the new rear main seal was leaking. On my way home I stopped at the Aamco transmission shop to get it fixed under warranty. Unfortunately it was Saturday. They told me I would have to stick around for 2-3 days but they would fix it for free. They also told me that I could just get it fixed at an AAmco near home. This turned out to not be true. The Aamco near home wanted another $1200 to replace it. I wasn’t going to pay another $1200 after just paying $3500 to for the trans rebuild. I ended up putting some stop leak product in the Transmission. It slowed it down but never completely stopped it.After getting a few estimates to get the rear Main seal replaced I decided to look into Transmission Stop Leak again. I found this product and it seemed better than what I had used previously and that worked OK. I put it in according to instructions and drove around with it until my next oil change was due. I took it to a local Toyota dealership which had very reasonable oil change prices, only about 5 dollars more than it would cost me to buy the oil and filter. Tundras take 8 qts of Full synthetic. They confirmed that I needed a rear main seal. I asked them what about putting Stop Leak in the Transmission. They told not to do that because there was a good chance it would ruin the transmission. Well too late I had already used it. I decided to wait and see what would happen because it had only used 1 quart between oil changes. Oil is a lot cheaper than replacing the rear main seal. I am so glad I did because as per their instructions before I went back for the next oil change I cleaned the motor off really well with degreaser and a pressure washer. This time they told me that it wasn’t the rear main seal that was leaking but the Cam Towers. This was goin go be $4200 to fix. Since it was using less oil I decided to wait a little longer to see what happened. The bottom line is AT-205 RE-Seal didn’t ruin my motor. It did stop the oil leaks though. Toyota told me I had very slight weepage around my valve cover gaskets but never either of the other 2 oil leaks again. I can only assume they thought I got them fixed. I cleaned up the under carriage a few more times to check on things and was amazed at how well this product worked to soften up those seals to stop the oil leaks. I now have more than 180k miles on the Tundra and the only time it uses oil is towing a trailer at 70-80 mph for long trips. This product is a bit more expensive than some of the brands but in my opinion well worth it.

    Reviewer: Standng
    Rating: 5.0 out of 5 stars
    Title: Used for Small PowerSteering leak
    Review: Add some to the reservoir to correct a small Chev Equinox PowerSteering leak. It’s been a few days and so far it’s working. It also reconditions rubber window seals and rubber boots like ball joints.

    Reviewer: Tim
    Rating: 4.0 out of 5 stars
    Title: Worked for me using a huge dose, review of other snake oils
    Review: I have a jeep that I bought for a future project. It runs and drives and I have to move it around sometimes. The power steering pours out fluid, I fill it, and before I can drive it around the yard its screaming and empty. Initially I would put ps fluid in there, but it drained out so quickly I just put whatever was around, type F, straight 30 weight, dex merc. So this system was absolutely clean, had gallons of fluid run through it. I don’t want to trash the pump, but I don’t know where its leaking from, the thing leaks every fluid. Plus, it has rubber ps and trans lines running all over to a cooler and random routing typical of Chrysler. The whole mess is covered in years of crud. Jeeps have crappy power steering pumps compared to gm. I bought this and poured the whole bottle in, the system was dry. I topped it off with ps fluid. It would barely steer, shudder and was very hard to steer but was not leaking. I needed to drive straight then make 2 u turns. I couldn’t drive the damn thing, it would not steer but no leaking. I let it run and wandered off cursing. So I siphoned all I could out of the pump, and topped off with ps fluid. Hey, it would steer again, good enough to move around. Ths was 8 months ago, no leaks, steering is tough but better than no fluid at all. This is a recirculating ball system.GM saginaw boxes are the absolute best, fill with trans fluid and they are good for life. I have fixed rust holes on them with aluminum duct tape.Rack and pinion systems are different, and much less durable. Once a wheel takes a curb hit, it scars the pinion and just keeps throwing metal into the fluid which eventually gets to a seal and cuts it. Stop leak won’t fix this. You can disassemble them, and dremel blend the chipped scarred areas to blend the chipped area and be back on the road for a while, till you hit a curb again.Lukas products are just thick dyed fluid which may top leaks due to increased viscosity, however they can blow lines from increased pressure. Blue devil can work but will make the seals mushy, gotta add just enough to get the leak to stop, no more. A little added every few days till the leak almost stops then call it quits.On to another vehicle. chevy truck, took it from hot florida to up north in snow. I had just flushed and filled it with valvoline ps fluid. Hydroboost system, so its running the power steering and power brakes. It started leaking. Pulled into a dollar general and bought their cheap ps fluid. leak stopped and no issues for 3 months now.

    Reviewer: JM
    Rating: 5.0 out of 5 stars
    Title: ATP Automotive AT-205 Re-Seal Stops Leaks, 8 Ounce Bottle
    Review: ATP Automotive reseal product works very well. Especially on older vehicles with dried rubber gasket material.Will not stop large leaks but, will condition smaller leaks rubber material to slow and stop them completely.Great item. Thank you 🙂

    Reviewer: Robert
    Rating: 5.0 out of 5 stars
    Title: Be patient it takes time
    Review: The product works. They rejuvenates all the seals. But it takes time. 3 to 4 days. Then you’ll see the leaks begin to stop. It worked for me.

    Reviewer: lucia
    Rating: 5.0 out of 5 stars
    Title:
    Review: Tenia mas de 10 años batallando con el problema de una gotera que tenia mi auto en el motor y los mecanicos no lograban identificar de donde venia. Gracias a este producto pude resolver en un dia lo que muchos mecanicos no pudieron en 10 años. Lo recomiendo ampliamente. Muy accesible el precio, y muy fácil de utilizar.

    Reviewer: Domenico
    Rating: 5.0 out of 5 stars
    Title:
    Review: Ottimo sigillante che fa quello che promette

    Reviewer: MG
    Rating: 5.0 out of 5 stars
    Title:
    Review: Did exactly what it said, it stopped the engine oil leak

    Reviewer: alex622005
    Rating: 5.0 out of 5 stars
    Title:
    Review: Très bon produit, après utilisation plus aucune traces sur mon sol.Seul produit ayant fonctionné.

    Reviewer: Klant
    Rating: 1.0 out of 5 stars
    Title:
    Review: Op het laatste moment is mijn bestelling geannuleerd door verkoper.Bedrag nog niet retour ontvangen.