Tag: automotive replacement parts

  • ATP Automotive AT-205 Re-Seal Stops Leaks, 8 Ounce Bottle

    ATP Automotive AT-205 Re-Seal Stops Leaks, 8 Ounce Bottle


    AT-205 Re-Seal is a fast, effective and safe stop-leak for all rubber seals and gaskets. The exclusive formulation restores worn or dried out seals and is not harmful to internal bearings and components. 
    Is Discontinued By Manufacturer ‏ : ‎ No
    Product Dimensions ‏ : ‎ 7 x 4.5 x 4 inches; 1.76 ounces
    Item model number ‏ : ‎ AT-205
    Date First Available ‏ : ‎ July 7, 2004
    Manufacturer ‏ : ‎ ATP
    ASIN ‏ : ‎ B000NVW1LM
    Country of Origin ‏ : ‎ USA

    Professional strength fast acting resealer, stops leaks fast
    Rejuivinates all rubber seals & gaskets in engines, transmissions, power steering, differentials and hydraulic systems
    Compatible with conventional and synthetic oils, ATF, gear oil, power steering fluids and hydraulic oil
    Does not contain petroleum distillates, will not over-swell or breakdown seals
    8oz bottle will treat a 6 quart capacity, adjust accordingly

    Price: $23.73 – $20.23
    (as of Jan 22, 2025 19:32:20 UTC – Details)





    Customer Reviews

    Reviewer: Sik of Amzn Revws
    Rating: 5.0 out of 5 stars
    Title: IT IS NOT SNAKE OIL It worked for me w/significant rear main seal leak
    Review: I developed a significant rear main seal leak on a 2004 Chevrolet Suburban. This is after I used synthetic oil. (I thought this was no longer an issue with synthetic , but there is no other explaination for the leak). I really did not have any confidence that this product would work. It did have great reviews and I figured it was worth a try but as much oil that was literally dripping as I entered my driveway in the puddles underneath SUV after parking it I had my doubts. As the instructions indicate you need to drive it about 500 miles. After 500 miles I still had a bit of a leak but it was much improved. I did not change out my oil at this time I left the additive in and then after approximately 2,000 miles, there is no trace of any oil leak! This stuff worked wonders for me. No more oil loss.

    Reviewer: Prof Daddy
    Rating: 5.0 out of 5 stars
    Title: I highly recommend this product. It saved me more than $4200 fixing oil seal leaks.
    Review: I bought a used Tundra with 140K miles on it that I knew had a leaking rear main seal. It was a $1000 repair if you get a really great deal. I ended up getting the truck for a really good price and was prepared to get the rear main seal fixed. I ended up putting it off and it was going through a bout a quart of oil in 5000 miles. I wasn’t worried. Some German cars tell you going through a quart every 800 miles is normal. WTF?My old truck had the transmission go out on the road and I had to get it rebuilt by AAmco. They convinced me to replace the rear main seal while the transmission was out even though it wasn’t leaking. I continued my trip, had the transmission checked out as required. I was informed then that the new rear main seal was leaking. On my way home I stopped at the Aamco transmission shop to get it fixed under warranty. Unfortunately it was Saturday. They told me I would have to stick around for 2-3 days but they would fix it for free. They also told me that I could just get it fixed at an AAmco near home. This turned out to not be true. The Aamco near home wanted another $1200 to replace it. I wasn’t going to pay another $1200 after just paying $3500 to for the trans rebuild. I ended up putting some stop leak product in the Transmission. It slowed it down but never completely stopped it.After getting a few estimates to get the rear Main seal replaced I decided to look into Transmission Stop Leak again. I found this product and it seemed better than what I had used previously and that worked OK. I put it in according to instructions and drove around with it until my next oil change was due. I took it to a local Toyota dealership which had very reasonable oil change prices, only about 5 dollars more than it would cost me to buy the oil and filter. Tundras take 8 qts of Full synthetic. They confirmed that I needed a rear main seal. I asked them what about putting Stop Leak in the Transmission. They told not to do that because there was a good chance it would ruin the transmission. Well too late I had already used it. I decided to wait and see what would happen because it had only used 1 quart between oil changes. Oil is a lot cheaper than replacing the rear main seal. I am so glad I did because as per their instructions before I went back for the next oil change I cleaned the motor off really well with degreaser and a pressure washer. This time they told me that it wasn’t the rear main seal that was leaking but the Cam Towers. This was goin go be $4200 to fix. Since it was using less oil I decided to wait a little longer to see what happened. The bottom line is AT-205 RE-Seal didn’t ruin my motor. It did stop the oil leaks though. Toyota told me I had very slight weepage around my valve cover gaskets but never either of the other 2 oil leaks again. I can only assume they thought I got them fixed. I cleaned up the under carriage a few more times to check on things and was amazed at how well this product worked to soften up those seals to stop the oil leaks. I now have more than 180k miles on the Tundra and the only time it uses oil is towing a trailer at 70-80 mph for long trips. This product is a bit more expensive than some of the brands but in my opinion well worth it.

    Reviewer: Standng
    Rating: 5.0 out of 5 stars
    Title: Used for Small PowerSteering leak
    Review: Add some to the reservoir to correct a small Chev Equinox PowerSteering leak. It’s been a few days and so far it’s working. It also reconditions rubber window seals and rubber boots like ball joints.

    Reviewer: Tim
    Rating: 4.0 out of 5 stars
    Title: Worked for me using a huge dose, review of other snake oils
    Review: I have a jeep that I bought for a future project. It runs and drives and I have to move it around sometimes. The power steering pours out fluid, I fill it, and before I can drive it around the yard its screaming and empty. Initially I would put ps fluid in there, but it drained out so quickly I just put whatever was around, type F, straight 30 weight, dex merc. So this system was absolutely clean, had gallons of fluid run through it. I don’t want to trash the pump, but I don’t know where its leaking from, the thing leaks every fluid. Plus, it has rubber ps and trans lines running all over to a cooler and random routing typical of Chrysler. The whole mess is covered in years of crud. Jeeps have crappy power steering pumps compared to gm. I bought this and poured the whole bottle in, the system was dry. I topped it off with ps fluid. It would barely steer, shudder and was very hard to steer but was not leaking. I needed to drive straight then make 2 u turns. I couldn’t drive the damn thing, it would not steer but no leaking. I let it run and wandered off cursing. So I siphoned all I could out of the pump, and topped off with ps fluid. Hey, it would steer again, good enough to move around. Ths was 8 months ago, no leaks, steering is tough but better than no fluid at all. This is a recirculating ball system.GM saginaw boxes are the absolute best, fill with trans fluid and they are good for life. I have fixed rust holes on them with aluminum duct tape.Rack and pinion systems are different, and much less durable. Once a wheel takes a curb hit, it scars the pinion and just keeps throwing metal into the fluid which eventually gets to a seal and cuts it. Stop leak won’t fix this. You can disassemble them, and dremel blend the chipped scarred areas to blend the chipped area and be back on the road for a while, till you hit a curb again.Lukas products are just thick dyed fluid which may top leaks due to increased viscosity, however they can blow lines from increased pressure. Blue devil can work but will make the seals mushy, gotta add just enough to get the leak to stop, no more. A little added every few days till the leak almost stops then call it quits.On to another vehicle. chevy truck, took it from hot florida to up north in snow. I had just flushed and filled it with valvoline ps fluid. Hydroboost system, so its running the power steering and power brakes. It started leaking. Pulled into a dollar general and bought their cheap ps fluid. leak stopped and no issues for 3 months now.

    Reviewer: JM
    Rating: 5.0 out of 5 stars
    Title: ATP Automotive AT-205 Re-Seal Stops Leaks, 8 Ounce Bottle
    Review: ATP Automotive reseal product works very well. Especially on older vehicles with dried rubber gasket material.Will not stop large leaks but, will condition smaller leaks rubber material to slow and stop them completely.Great item. Thank you 🙂

    Reviewer: Robert
    Rating: 5.0 out of 5 stars
    Title: Be patient it takes time
    Review: The product works. They rejuvenates all the seals. But it takes time. 3 to 4 days. Then you’ll see the leaks begin to stop. It worked for me.

    Reviewer: lucia
    Rating: 5.0 out of 5 stars
    Title:
    Review: Tenia mas de 10 años batallando con el problema de una gotera que tenia mi auto en el motor y los mecanicos no lograban identificar de donde venia. Gracias a este producto pude resolver en un dia lo que muchos mecanicos no pudieron en 10 años. Lo recomiendo ampliamente. Muy accesible el precio, y muy fácil de utilizar.

    Reviewer: Domenico
    Rating: 5.0 out of 5 stars
    Title:
    Review: Ottimo sigillante che fa quello che promette

    Reviewer: MG
    Rating: 5.0 out of 5 stars
    Title:
    Review: Did exactly what it said, it stopped the engine oil leak

    Reviewer: alex622005
    Rating: 5.0 out of 5 stars
    Title:
    Review: Très bon produit, après utilisation plus aucune traces sur mon sol.Seul produit ayant fonctionné.

    Reviewer: Klant
    Rating: 1.0 out of 5 stars
    Title:
    Review: Op het laatste moment is mijn bestelling geannuleerd door verkoper.Bedrag nog niet retour ontvangen.

  • KeylessOption Key Fob Replacement 3-Button for 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 Ford F150 Explorer Ranger Mustang Lincoln Mazda Mercury Keyless Entry Remote Car Control – 2 Pack

    KeylessOption Key Fob Replacement 3-Button for 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 Ford F150 Explorer Ranger Mustang Lincoln Mazda Mercury Keyless Entry Remote Car Control – 2 Pack

    From the brand

    Keyless Option BannerKeyless Option Banner

    Welcome to Keyless Option

    Here to help you replace your Key Fobs,

    Keyless Entry Systems, Ignition Keys,

    Replacement Shells and other Automotive needs

    Keyless Option LogoKeyless Option Logo

    Keyless Option is an automotive remote company providing replacement automotive products.

    From replacement key fobs to advanced remote programming tools, Keyless Option is dedicated to delivering reliable and user-friendly solutions for modern vehicle owners.

    Keyless Option Best Selling

    Is this Remote Self-Programmable?

    Check bullet points for information on your remote’s programming

    Will this work on my car?

    Make sure you use ConfirmedFit for the correct replacement

    How easy is returning an item?

    Return through Orders for a hassle-free process

    Self-Programming: This 3-button key fob replacement is designed for easy, self-programming, making it an ideal DIY solution. You won’t need professional assistance to set it up—just follow the simple instructions provided. In just a few easy steps, you can program the fob to your vehicle, restoring full functionality without costly visits to the dealership. It’s a quick, cost-effective way to replace a lost or damaged key fob while maintaining convenience and security.
    Vehicle Compatibility: This car remote can only be programmed for specific Ford, Lincoln, Mazda, and Mercury models. This includes the Ranger, E-Series, Econoline, Edge, Escape, Escort, Excursion, Expedition, Explorer, F-Series, Flex, Freestar, Freestyle, Fusion, Taurus, Windstar, Mark LT, Navigator, B-Series, Tribute, Mariner, Mountaineer, and Cougar.
    Premium Replacement: This car fob serves as a replacement for the original OEM part numbers 8L3Z-15K601-AA, 8L3T-15K601-AA, F8DB-15K601-AA, 2L3T-15K601-AA, 2L3T-15K601-AB, FCC ID: CWTWB1U345, CWTWB1U331, CWTWB1U212, GQ43VT11T. Designed to match the specifications of the factory remote. Unlike generic alternatives, this premium replacement ensures high-quality performance while offering an affordable and convenient option for replacing a lost or damaged remote.
    Feature Rich 3-Button Fob: This Keyless Options replacement remote features three convenient button options, providing a range of functions for added security and ease of use. The lock and unlock buttons offer quick access to secure or open your vehicle. Additionally, the panic button ensures safety by triggering an alarm in case of an emergency, offering peace of mind.
    Warranty: Our FCC ID Registered product comes with a 90-day warranty, ensuring quality and peace of mind. If any defects or issues arise within the warranty period, we will provide a replacement, hassle-free.

    Price: $8.55
    (as of Jan 22, 2025 18:27:53 UTC – Details)





    Customer Reviews

    Reviewer: Squishy
    Rating: 5.0 out of 5 stars
    Title: EASY PROGRAMMING
    Review: This product is AWESOME!!! Easy programming, great video guide, and low price. HIGHLY RECOMMEND! It even comes with batteries.

    Reviewer: gaw717
    Rating: 5.0 out of 5 stars
    Title: great replacement key fob
    Review: Bought these for a 1999 Ford Explorer XLT 2WD and they were easy to program and are working great. You just need to get your vehicle into program mode, turn the key from off to on without starting the engine do this 8 times and on the 8th time leave it in the on position and you should hear the door looks activate after that push a button on the fob to unlock the locks and then lock them again (leave the door open during programming) after that do the same with the other fob and that’s it simple.

    Reviewer: Rich B.
    Rating: 5.0 out of 5 stars
    Title: Ridiculously inexpensive and work perfectly
    Review: At the price, I was skeptical that these would work, but they do. Amazon ensured that they works work on my 2012 fusion hybrid, which is a great feature. Program ing instructions via QR code, in the pack. Couldn’t be happier.

    Reviewer: D. Chicas
    Rating: 4.0 out of 5 stars
    Title: Great product
    Review: These key fobs are great easy programming and support. My only complaint is that the paint fades really quickly so expect the unexpected and they are quite durable and the speed, look, functionality is as designed 🤙

    Reviewer: kenton michael
    Rating: 5.0 out of 5 stars
    Title: works as described
    Review: Bought to replace my remote control that broke. was easy to program and works as described. Was a great price.

    Reviewer: Jason W.
    Rating: 3.0 out of 5 stars
    Title: Good for price, expect weak battery, and weak plastic
    Review: The loop for the key ring is really weak, breaks far easier than the factory keyfobs. We received them and both worked, 1 died after about 4 weeks though. Fresh battery did get it working again but after about 9 months the loop broke so it now sits in the glovebox.They do work although both of them struggle to open the passenger door, have to push the button 4 or 5 times before it unlocks the passenger door. Driver door unlocks every time, although the range for them is about 1/3 of what the factory fob is. I can trigger the alarm or unlock with the factory fob from about 150′ away. I have to be aboue 30-40 feet away for both of these.All that said, for the price of these, vs the $80 Ford wants, I don’t regret buying them. I don’t know that I can say I’d recommend them though, for what it’s worth.

    Reviewer: michael henri
    Rating: 5.0 out of 5 stars
    Title: Programming Tip 1999 Navigator
    Review: Look up directions on QR code they work. Start inside vehicle with doors locked. Use the door handle to open driver door rather than unlocking door with unlock button NOR with pulling up on the lock brad. Upon the 8th OFF/ON key turning the end result should have the key in the on position (position prior to ignition initiation.) at that point youll hear all the doors unlock like it’s a transformer to it car and you’ll know it’s Time to hit the button on your new dealio doohickey opener remote thingy. Good luck it worked for me with a little gumption.

    Reviewer: Wanda Singleton
    Rating: 4.0 out of 5 stars
    Title: Was easy to pair
    Review: What I didn’t like was it had no instructions. Once pair I really enjoy using it.

    Reviewer: Beto Ortega
    Rating: 5.0 out of 5 stars
    Title:
    Review: Muy rápida la entrega, la preparacion del envío todo en excelente estado, recomendado al 100%

    Reviewer: Gisell P.
    Rating: 5.0 out of 5 stars
    Title:
    Review: Su buena calidad su rápida entrega el color y es de muy muy buena calidad me siento muy satisfecha con la compra

    Reviewer: Waleed
    Rating: 3.0 out of 5 stars
    Title:
    Review: You have to press many times for the remote respondEasy to program just look on YouTube

    Reviewer: Mark
    Rating: 4.0 out of 5 stars
    Title:
    Review: Works just fine, have had zero issue in 3 months and they have roughly a 100ft range.

    Reviewer: Charles C.
    Rating: 5.0 out of 5 stars
    Title:
    Review: I actually thought I was buying just the casings for the internal circuit board. I was extremely surprised and pleased to receive 2 new complete units. It took all of 2 minutes to complete the setup.

  • Standard Motor Products DS72T Dimmer Switch

    Standard Motor Products DS72T Dimmer Switch


    Standard Motor Products replacement idle air control valves help you get maximum fuel efficiency and power from your engine. A properly operating idle air control valve is an essential component to helping your vehicle run flawlessly.
    country of origin : china
    the package height of the product is 3.89 inches
    the package length of the product is 8.86 inches
    the package width of the product is 5.18 inches
    Fit type: Vehicle Specific

    Price: $12.49
    (as of Jan 22, 2025 17:19:07 UTC – Details)





    Customer Reviews

    Reviewer: Amazon Customer
    Rating: 5.0 out of 5 stars
    Title: Good replacement
    Review: Switch worked great for my 79 k10, I ended up cutting the OEM plug and adding crimp on connectors and taped it up, my original issue was a lose connection from the oem plug, but I went ahead and put this switch on and it works great.

    Reviewer: Max Garcia
    Rating: 5.0 out of 5 stars
    Title: Worked great
    Review: My old push button dimmer went out. This one was a prefect match. And installed in minutes.

    Reviewer: Buck
    Rating: 5.0 out of 5 stars
    Title: Works as it should
    Review: Installed and works great, fits just like the original in my 79 nova

    Reviewer: Wayne Mayes
    Rating: 5.0 out of 5 stars
    Title: Great item
    Review: It worked perfectly and saved me $25 off the auto parts store price.

    Reviewer: CableMaker
    Rating: 4.0 out of 5 stars
    Title: Converted broken late model column switch
    Review: Converted broken late model column switch to floor mounted switch. Works great!

    Reviewer: Bobby Bilderback
    Rating: 5.0 out of 5 stars
    Title: Hi Beam / Lo Beam Stomp Switch
    Review: The Switch arrived the same day it was ordered …and was priced significantly lower than the exact same part from the autoparts store… The switch was identical to the original one and was installed with ease. NO COMPLAINTS AT ALL … ANOTHER GREAT REPRODUCTION PRODUCT FOR OLDER CLASSIC MUSCLE CARS!

    Reviewer: Donald
    Rating: 5.0 out of 5 stars
    Title: Timely delivery
    Review: Perfect timing and fit perfectly

    Reviewer: Robert Schroeder
    Rating: 5.0 out of 5 stars
    Title: worked well
    Review: it worked and is working now for a year

  • DURATECH 2 in 1 Brake Bleeder Kit, Brake Fluid Bleeder Kit with Handheld Vacuum Pump, for Automotive, Organized in Portable case

    DURATECH 2 in 1 Brake Bleeder Kit, Brake Fluid Bleeder Kit with Handheld Vacuum Pump, for Automotive, Organized in Portable case

    From the brand

    11

    Oil Filter Wrench Set

    Auto Repair Tools

    3-Jaw Gear Puller Set

    Brake booster kit comes with a vacuum gauge that can be widely used to test vehicle vacuum systems/as a vacuum sealer. Equipped with a vacuum gauge to help you take accurate readings. Pressure range: 0-30 in/Hg, 0-760 mm/Hg
    The hose is made from premium material for resilience, heat resistance and reliable sealing performance, The contoured design of the handle gives you a firm grip during use, so you can operate quickly and comfortably
    Handheld Vacuum Pump Kit comes complete with accessories. Includes handheld vacuum pump with vacuum gauge, 4.05 OZ reservoir jar, 4 transparent hoses, 3 different adapters and connectors included to allow you to use this tool kit on cars, bikes, motorcycles and other vehicles
    DURATECH brake system bleeding tools enable you to check vacuum operated automotive components, bleeding air from hydraulic systems and siphoning fluids. Creates both pressure and vacuum, it will help make an automotive repair or maintenance task easier
    All the tools and accessories are centrally compactly put on a built-in plastic tool case. Perfect for both home and business applications and easy to transport and store

    Price: $29.99
    (as of Jan 22, 2025 16:16:20 UTC – Details)





    Customer Reviews

    Reviewer: RWS
    Rating: 5.0 out of 5 stars
    Title: Works well when properly used
    Review: First of all, it comes in a nice, molded case — before you unpack it, note how it fits in or take a picture. When you go to put it away after use, you’ll be glad you did.There are some tricks to using this that are not in the manual. Also, the text of the manual says to connect the reservoir to the pump with a 3″ hose – don’t. Use one of the longer hoses (as it shows in the diagram). I keep a spray bottle of water/dish detergent mix in my garage. I highly recommend this in general and as a lube to make the fittings go into the hoses. Some other reviewers said they had trouble with tubing connections coming loose. I had no such problems because of the soap water I used. Also, it’s not good to allow brake fluid to get sucked into the pump. By using the long tube between the pump and the reservoir, it’s easy to keep the reservoir lower than the pump, so no fluid goes into the pump. I also squirted a little of my solution onto the reservoir O-ring. I don’t know if it needed it, but it made the seal very air-tight, no matter which orientation between jar and cap I used (in contrast to another reviewer who had problems sealing).The pump generated plenty of suction. When working on the car, I only used 10 to 15 psi of suction to keep from emptying the master cylinder too quickly. However, the pump easily gets over 20 psi if it is pumping on a sealed system.So, onward to the actual use. After cracking the front left bleeder on my 67 Chevy, I put my bleeder wrench on the screw and connected the pump. I opened the bleeder a 1/4 turn and was rewarded with a good flow of not too clean brake fluid with “pinpoint carbonation” in it. I think the tiny bubbles was my brake system problem, they caused my car to pull right on moderate braking (the bubbles reduced the brake force on the left). It took only about 3 minutes to do the bleeding – I spent more time jacking up the car, getting the wheel off, etc.I did not see any air leakage back up the bleeder threads as reported by other reviewers. I disagree with the reviewers who suggested putting Teflon tape on the bleeder threads. Introducing a material that wasn’t part of the brake system design could be unsafe. If the bleeder leaks along the threads, consider replacing it with a new one or put a finger full of grease over the outside of the bleeder (thus not inside the brake system). Normally the threads will be wet with brake fluid and won’t pass much air. If it takes a lot of suction to get the brake fluid to bleed out, it is likely an indication of an obstruction in the system such a rust in the brake lines (the flexible hose from the car body to the wheel is particularly prone to rusting up). Clear any such obstructions or the brakes won’t be safe no matter how much you bleed them.I’ve only had it a short time, so I can’t comment on its durability. It seems to be made well enough but keep in mind you don’t get a $100 tool for the price of this set.

    Reviewer: Bobcat
    Rating: 5.0 out of 5 stars
    Title: Comparison mityvac
    Review: Compared to the overseas mityvac competitor for the similar product, this American made product. Is $5 cheaper at slightly better or equal quality.Compared to the cheaper models, the product quality is easily worth the value.I find this product to be the highest value per dollar in the brake bleeder kit market currently.

    Reviewer: BigB
    Rating: 4.0 out of 5 stars
    Title: Works, but can be tricky as fills fast.
    Review: The pump is easy to set up and operated.The small bottles only hold like 4-6 ounces each and so you have to stop and empty them before you’ve finished pumping out typical volume of normal car reservoir. I had to fill it more than little over 2 x.. would suggest the bottles be 12 or even 14 ounces instead . Did 2 Hondas in same day. Spilled some because the tubing is rather stiff and when trying to transfer the fluid to old container it wants to twist and turn and drip from the end of tube.The included hard shell case is nice touch but it is tight so you must disassemble all the dirty hoses to put it away, a bit challenging after it’s been used.The bottles are so light they will just flip. Helps to have another pair of hands to hold things.Still it’s worth it. Good for consumer. Can use multiple times but not pro level..

    Reviewer: C
    Rating: 1.0 out of 5 stars
    Title: Don’t buy: Even for a cheap tool, this one is bad
    Review: I love cheap tools. I’ve got a garage full of cheap tools that have served me well for years. Whether it’s Amazon, the Wal store, H Freight, the big orange box store, or even the OG Sears, I’ve got tools from all those places plus a few car parts stores to boot.With that as context, this may be the worst cheap tool I have ever bought. As in, it literally did not work out of the box. I finally got around to using it today and all I can say is that if you read the negative reviews and still buy this tool, you must not care about your money.In short, don’t buy this. It did not work for me. It could not pull a vacuum to extract the brake fluid. So I had to go back to the old school method of working the brake pedal.It’s too bad because I’m rooting for Duratech. Like I said, I love cheap tools, assuming they actually work at all.

    Reviewer: Hugo a sebastian cruz
    Rating: 5.0 out of 5 stars
    Title: Good hard suction!!!
    Review: Use this pump for couple break bleeds and it gets the job done 100%. Like the included hoses and attachments.Extra seals and cup

    Reviewer: Sherri Lynn Greco
    Rating: 3.0 out of 5 stars
    Title: Cheap plastic
    Review: Did not work well at allNot great quality

    Reviewer: Poersch
    Rating: 5.0 out of 5 stars
    Title: Worked great!
    Review: Took longer to jack up each side and remove the tire than it did to use this tool to pump fresh fluid thru the lines and close it up. Easy driveway DIY with this tool, not sure why it took so long to buy one of these.

    Reviewer: BR
    Rating: 5.0 out of 5 stars
    Title: First ‘not a mighty vac’ I’ve found that works
    Review: I’ve ordered so many vacuum pumps for just an occasional use (why I’ve not gotten the best: mighty vac $$$$$) and they have all broken or not worked properly right out of the box.This is the first ‘not mighty vac’ that’s been holding up.I DO think it deserves a star knocked off for how it’s impossible to easily put it back in the case without removing the hose from the pump each time.I’ll update if I posted 5 stars too soon…

    Reviewer: Ryan Fernandez
    Rating: 5.0 out of 5 stars
    Title:
    Review: Works great, was awesome for bleeding my brakes

  • MOTOPOWER MP00205A 12V 800mA Automatic Battery Charger, Maintainer, Trickle and Desulfator

    MOTOPOWER MP00205A 12V 800mA Automatic Battery Charger, Maintainer, Trickle and Desulfator

    Product Description

    motopowermotopower

    MOTOPOWER is the registered brand of MOTOPOWER INC. We are the direct factory specializing in the eletrical products and accessories for automotive and powersports industry, such as battery chargers, battery testers, cell phone chargers, cables and more. All the products are designed, produced and sold directly by MOTOPOWER. We control all the progress from the very beginning material purchase to the final shipment to customers, so as to ensure the products quality and the customer satisfactory. You can get the best products here at the most competitive cost directly from MOTOPOWER stores on Amazon.

    motopower battery charger maintainer 12v battery charger maintainer motorcycle battery chargermotopower battery charger maintainer 12v battery charger maintainer motorcycle battery charger

    Charge and Maintain all types of 12V lead-acid batteries

    car battery chargercar battery charger

    Low-Voltage Activation & Recovery

    Pulse current applied for batteries between 4 – 8volts. Increase the battery voltage gradually to optimize the cells and restore their best performance.

    battery maintainerbattery maintainer

    Absorption Mode

    Force pulse current in the absorption stage to desulfate the cells. Removing the troublesome crystals and absorb into the charge cycle.

    motopower battery chargermotopower battery charger

    Maintain at 13.6volts Indefinitely

    Maintain the battery with float current close to 0.1 – 0.5amp and keep the battery at 13.6V+/-0.2V indefinitely. Restart charging when voltage drops.

    motopower battery chargermotopower battery charger

    Charging Stages

    Five CHARGING STAGES – Diagnosis, Soft Start, Bulk Charge, Absorption and Float/Maintenance. Bring the batteries to back to life.

    Benefits and Features – The best choice for your batteries

    motopower battery charger motorcycle battery charger maintainermotopower battery charger motorcycle battery charger maintainer

    Energy-Save & Safety

    No output without load. No battery drain when connecting with battery. Spark free for safety.

    12v battery charger12v battery charger

    Recondition Batteries

    Sulfation detection and repair cells damage. Optimize the battery chemistries.

    12v battery maintainer12v battery maintainer

    Thermal Compensation

    Stable performance for any climate. Low temperature activation.

    motopowermotopower

    Timer Protection

    24-hour absorption/desulfation. Stop automatically when fully charged or when time’s up.

    Direct Factory Source from MOTOPOWER Factory – Quality Ensured & Cost Effective

    motopower 12v battery charger maintainermotopower 12v battery charger maintainer

    Best Choice for Motorcycles, ATVs, Scooters, and Automobiles.

    Product Features:

    The MOTOPOWER MP00205A 12V 800mA Battery Charger allows you to connect the charger to the battery and leave it for maintenance indefinitely.

    Once the battery has reached a 100% charge, the chargers will automatically switch it’s output voltage to a safe, storage/float level (13.6V+/-0.2V) that eliminates the need to worry about the damaging effects of overcharging.

    Pulse Current Recovery Mode:

    In the Absorption Mode, the charger will give a 0.5Amp pulse current to charge and recover the battery until it’s fully charged. In this stage, the charger will decrease the battery sulfation and improve the battery performance gradually. For several times charging, you will find the battery internal resistance is lower and the performance is improved.

    Technical Details:

    – Input Voltage: 100-240V AC / 60Hz. – Output Voltage: 12 Volts DC @ 800mA – Charged Voltage: 14.2+/-0.2 Volts

    – Maintenance Voltage: 13.6+/-0.2 Volts – Activate Voltage: 4Volts ( Do not suggest charging dead batteries )

    Package Includes:

    – Battery Charger x 1 – SAE Alligator Clamp Cable x 1 – SAE Eyelet Terminal Cable(7.5A fused) x 1 – Instruction Manual x 1

    Add to Cart

    Add to Cart

    Add to Cart

    Add to Cart

    Add to Cart

    Add to Cart

    Customer Reviews

    4.5 out of 5 stars

    13,380

    4.4 out of 5 stars

    1,412

    4.5 out of 5 stars

    1,816

    4.5 out of 5 stars

    1,284

    4.3 out of 5 stars

    1,345

    4.5 out of 5 stars

    3,281

    Price

    $12.99$12.99 $19.99$19.99 $19.99$19.99 $29.99$29.99 $27.69$27.69 $20.65$20.65

    Battery Voltage
    12V 12V 12V 12V 6V & 12V 12V

    Charging Current
    800mA 800mA 1.5Amp 2Amp 2Amp & 4Amp 1Amp

    Maintenance Mode

    Charging Stages
    4 4 4 4 7 5

    Overcharge Protection

    Short Circuit Protection

    Reverse Polarity Protection

    Spark-proof

    Battery Repair
    Pulse current recovery Pulse current recovery Pulse current recovery Pulse current recovery Repair Mode Pulse current recovery

    Charger, Maintainer & Desulfator – An all-weather battery charger, battery maintainer, trickle charger, and battery desulfator. Perfect for charging and maintaining all 12-volt lead-acid, flooded or sealed maintenance free batteries (AGM and gel cell). ETL safety standard Listed.
    Automatic Desulfation & Optimization – Automatic detection of battery sulfation problem. Applying with pulse current technology to desulfate the batteries effectively. Optimize the battery performance during charging without any manual operation.
    Energy Saving & Spark Free – Zero output in standby mode. No battery drain when connecting with the battery. Spark proof during lead connection for safety.
    ETL/UL Certified, Multi-level Safety Protection & Timer Set Up – ETL safety certified. Overcharge, short circuit and reverse polarity protected. Charge the battery up to 14.4V and Maintain the battery at 13.6V for long time to avoid gasing and to extend the battery life. 24-hour Timer is set up in the program to terminate the charge and enter the maintaining mode once the voltage is above 14V to ensure safety.
    Easy Operation -Just plug-in, connect to the battery and start charging or maintaining your battery. The desulfation is working automatically during the charing. No manual operation.

    Price: $23.50 – $12.99
    (as of Jan 22, 2025 15:00:48 UTC – Details)





    Customer Reviews

    Reviewer: KC Edwin
    Rating: 5.0 out of 5 stars
    Title: Great Charger
    Review: I’ve been using this charger to charge 3 go kart batteries so far. It works great as far as charging them to 13V and slow trickle charge them over 13V. I like the fact that trickle charging is safe and no need to disconnect immediately after fully charged. So far so good. The device is small and easy to use. I believe it’s worth the cost of having a safe charger that you can depend on.

    Reviewer: DAH
    Rating: 5.0 out of 5 stars
    Title: Auto Battery Charger
    Review: Excellent product. Fully charged my dead battery. Charger is much better than I expected. Very well built. Fast shipping and great price.

    Reviewer: Daniel houser
    Rating: 5.0 out of 5 stars
    Title: Small, works great for all top post and side post batteries
    Review: When the product first arrived, it got here very quickly and arrived in a small box, after I opened it up, I realized how little it was and how convenient that would be to keep the batteries charged over the winter on TinderThe unit works automatically and flawlessly key notes to considerCompactEasy to useWorks on most batteriesUses little electricityHas a long cord to reach hard to get two places

    Reviewer: B. Clay Miles
    Rating: 4.0 out of 5 stars
    Title: Keep expectations reasonable, maybe do a little DIY modding, and it’s a great purchase
    Review: Update 22 June 2024: five down to three was too harsh. It was extremely inexpensive and served well for four years. After searching (endlessly) for an appropriate replacement, I ended up buying another MotoPower unit – their 1.5a version. I figure a device with a little more heft probably won’t generate as much heat as this one did, so may last even longer; and it was barely more than what I paid for the first one!Update 19 June 2024: After almost exactly four years in service, The charger died. Wife smelled the acrid scent of burnt out electronics and alerted me to it. It was in use daily for all four years. A while after the narrative below, I had set up a Raspberry Pi to monitor the battery voltage and turn this on when it reached a certain threshold – the backend story is the 2018 Honda Accord has a nasty parasitic draw problem, so it was necessary to alway have it monitored and charged cyclicly. So it was powered on and off from a few times to maybe ten times a day. However, a charger like this is _not_ a complex device; exactly four years of service strikes me as ‘planned obsolescence’. So I’m dropping the rating from five stars to three stars. It is not hard to build simple electronics to last decades. There’s just no good excuse for a short life – other than to ‘encourage’ a new purchase.Here’s my tale:After a couple of months of driving my car barely once a week during the COVID-19 isolation orders, my 2018 Honda Accord wouldn’t start. Tried a jump start from wife’s 2002 Honda Civic – still no go. yikes! Got out the decent quality multi-meter I have – less than 8 volts, from a 12V battery. Double yikes! Checked the electrolyte – whoa, one of the six cells had exposed plates. Well, that fairly well explains the very low volts. Topped it up to the line, then tried jump start again…yep, triple yikes.Well, I had plenty of time on my hands being furloughed, so I ordered this little unit. Inexpensive, but it made appropriate promises for what it can do, for what it costs. Ratings good. Some horrible though. Took the chance.At 800mA, this is not going to charge a 500Ah car battery quickly. I hooked it up and monitored the voltage for several days. Weather was rather warm, 80’s to 90’s F, and I noticed this little device getting pretty darned hot – too hot, in fact.Disconnected it and took off the back plate. Board very hot to touch, capacitor and transformer too hot to touch. Bad design! This thing needs to either be potted with a non-conductive heat sink material for full contact with the inside of the case, or the case needs vents. Period. That much heat will toast those components over time. True – I was asking the device for all it had – to charge a pretty deeply discharged 12V high amp capacity battery. Which isn’t _per se_ its intended function. Still though.I decided to DIY. Took a drill and drilled four holes in the back plate, and two holes on each side, see photos. Pretty? Not on your life. Crude but fairly effective? Yes indeed, at least, it allowed _some_ of that heat to dissipate.Eventually there was enough charge to start the car, took it for a long drive, then hooked it up again to see if it would complete the full cycle – which it did after another day. It eventually hit the couple of voltage marks to go into absorption mode, then into float mode. Highly accurate too – 14.19v – still absorption mode. 14.20v – boom, float mode. Repeatable.For twenty bucks, it did what I wanted – and most importantly, what I _expected_ – unlike some of the reviews that complain it took days to charge their battery…well duh! It puts out less than an amp, expecting a fast charge from a slow charge device is just….dumb.That said – please guys – make the ‘slotted’ sides into real slots, to let some air flow through it. I realize it adds a little to the manufacturing costs, but people will get a longer life out of their (admittedly tiny) investment in this – and maybe fewer will die out in the field, eliciting bad reviews.As for me, I’m very happy with it – because it met my expectations.

    Reviewer: j. juarez
    Rating: 5.0 out of 5 stars
    Title: Is great product
    Review: Took it out of the box.It was very well packed.Read the instruction manual.Hooked it up to my vevor diesel heater. And it has been running continuleslie for about 27 hours.Good product very happy with it.Reasonably priced I’d recommend it to somebody else

    Reviewer: John W Davis
    Rating: 5.0 out of 5 stars
    Title: It is a great product at a great price
    Review: Snow blower was easy to assemble and fired tight up after a couple of pulls

    Reviewer: Charles J. Hall Jr.
    Rating: 5.0 out of 5 stars
    Title: Good Choice
    Review: Have only used it for a few days, but it’s working perfectly. Has kept my truck battery at full charge during the winter storm. I installed it as a permanent addition to the engine compartment and simply plug it in each night.

    Reviewer: Mike Devore
    Rating: 4.0 out of 5 stars
    Title: Works well
    Review: Keeps my vehicles charged. I’m very happy with them. Its winter time and the shop and garage is cold so the chargers stay cool. I’m thinking that will change this summer as the areas will get hot and the charger has no vent holes to vent off the internal heat. if so, then I plan to cut some vent holes in the case’s.

    Reviewer: Mazin-01
    Rating: 5.0 out of 5 stars
    Title:
    Review: Son totalmente originales, funcionan muy bien para hacer una carga lenta a alguna bateria, lo cual puede ayudar a mantener la salud de la bateria, y como mantenedor de baterias funciona muy bien, siendo compacto no ocupa espacio y permite tener bien si se almacenan las baterias.Muy recomendable calidad precio

    Reviewer: Ahmed A Baarmah
    Rating: 2.0 out of 5 stars
    Title:
    Review: I charged the battery once , battery fully charged and then when i want to charge the battery again, the charger didn’t work 🙁

    Reviewer: raghav patel
    Rating: 5.0 out of 5 stars
    Title:
    Review: great

    Reviewer: Ángel Vargas
    Rating: 5.0 out of 5 stars
    Title:
    Review: hace su funcion, esta muy completo por si no cuentas con las conexiones, asi como llego lo use y sun problemas sali a rodar

    Reviewer: Amazon Customer
    Rating: 5.0 out of 5 stars
    Title:
    Review: Easy to use and works as expectes

  • 157mil 18sqft Roll Pack Universal Sound Deadener for Cars with Aluminum Foil Tape&Car Trim Removal Tool-Closed Cell Foam Noise Deadening Material-Heat Shield Insulation Dampening Mat

    157mil 18sqft Roll Pack Universal Sound Deadener for Cars with Aluminum Foil Tape&Car Trim Removal Tool-Closed Cell Foam Noise Deadening Material-Heat Shield Insulation Dampening Mat

    Product Description

    sound deadener for cars deadening mat material noise insulation roll proof heat shield hoodsound deadener for cars deadening mat material noise insulation roll proof heat shield hood

    sound deadener for cars deadening mat material noise insulation roll proof heat shield hoodsound deadener for cars deadening mat material noise insulation roll proof heat shield hood

    Principle of Effective Sound & Heat insulation

    High-density Closed Cell Foam

    Absorb heat and soundGreatly reduce the penetration and transmission

    Major Features for Ours Sound Insulation & Automatic Heat Shield

    sound deadener for cars deadening mat material noise insulation roll proof heat shield hoodsound deadener for cars deadening mat material noise insulation roll proof heat shield hood

    Waterproof

    Aggsound car sound deadener can provide effective waterproof capacity without worrying about the problem of moisture absorption of the automobile sound insulation materials.

    sound deadener for cars deadening mat material noise insulation roll proof heat shield hoodsound deadener for cars deadening mat material noise insulation roll proof heat shield hood

    Strong Self-adhesive

    AggSound noise insulation mats with high-quality super adhesive backing,it can be effectively pasted on the cleaned materials without falling down due to poor adhesive.

    sound deadener for cars deadening mat material noise insulation roll proof heat shield hoodsound deadener for cars deadening mat material noise insulation roll proof heat shield hood

    Flexible & Easy to Cut

    Our car sound damping material is made of lightweight closed cell foam materials, which can be easily cut and installed as required and the whole process is simple.

    Installation Steps:

    just 5 steps!

    All People can do it!

    1.Disassembly: Remove the panel.

    2.Cleaning: Clean up the place that needs to be installed.

    3.Cutting: Using an utility knife or scissors, cut the desired piece of materials.

    4.Pasting: Fit the insulation materials tightly and firmly to the car body, so that the best sound insulation and dampening performance can be exerted.

    5.Reassembly: Make sure that all car parts fit well into their places and that there are no gaps.

    sound deadener for cars deadening mat material noise insulation roll proof heat shield hoodsound deadener for cars deadening mat material noise insulation roll proof heat shield hood

    sound deadener for cars deadening mat material noise insulation roll proof heat shield hoodsound deadener for cars deadening mat material noise insulation roll proof heat shield hood

    Add to Cart

    Add to Cart

    Add to Cart

    Customer Reviews

    4.3 out of 5 stars

    991

    4.5 out of 5 stars

    666

    4.5 out of 5 stars

    666

    Price

    $22.99$22.99 $26.99$26.99 $29.99$29.99

    Thickness
    157mil/4mm 157mil/4mm 394mil/10mm

    Materials
    High-density Closed Cell Foam Aluminum Foil & High-density Closed Cell Foam Aluminum Foil & Closed Cell Foam

    Sound insulation

    Heat insulation

    Position of Use
    Universal thickness, suitable for all parts of the vehicle Universal thickness, suitable for all parts of the vehicle Thickened thickness, more suitable for firewall and engine (Notice: Some vehicles may not be suitable for doors)

    [4mm High Quality Closed Cell Foam, Provide Better Sound & Heat Insulation] Our automotive sound deadener is composed of three layers of high quality material, including 4mm high density closed cell foam, high quality back glue and back paper. It provides better noise insulation effect for your car so you can enjoy a more quiet and comfortable environment. At the same time, it effectively reduces 98% heat transfer. Products include: 15.7*165.3inch mat*1roll, aluminum foil tape*1, removal tool*1.
    [High-quality Material, Meet the Needs of Longer & Better Use] 4mm high quality closed cell foam has a higher anti-extrusion function compared with inferior foam product, so there is no need to worry about the collapse of the use process. Excellent adhesive has strong viscosity, which can ensure to stick firmly. High quality back paper is easy to to peel & install and not easy to tear.
    [Easy to Install, Wide Application] AggSound heat shied pad is convenient in installation and operation. Just five steps can be completed: disassemble-clean-cute-paste-reinstallate. 4mm unviersal thickness is more suitable for the car door, hood, trunk, floor, firewall and other parts of the vehicle. You do not have to worry about the phenomenon of not being able to install because the thickness is too large but the vehicle gap is not enough.
    [A variety of different thicknesses to meet different needs] Aggsound offers a variety of different thicknesses of insulation foam 4mm/6mm/8mm/10mm/0.25inch/0.5inch/1inch etc.. Different thicknesses of insulation foam to meet the different needs of the application.

    Price: $22.99
    (as of Jan 22, 2025 13:52:33 UTC – Details)





    Customer Reviews

    Reviewer: MIXITDOC
    Rating: 5.0 out of 5 stars
    Title: Good value.
    Review: Works well.

    Reviewer: TH Houston
    Rating: 5.0 out of 5 stars
    Title: Easy to apply and bonds well to plastic
    Review: Purchase this to line the inside of a generator shed and help with sound absorption and some heat reflection. Very strong and aggressive adhesive that bonds well to the plastic. That was one of the challenges is that not many things want to bond well to low density polyethylene, which is what I believe the shed is made out of. Like the product and would buy it again.

    Reviewer: Popadopolas
    Rating: 4.0 out of 5 stars
    Title: Worked good
    Review: I haven’t got to use enough sound deadener to give a great opinion on this, but it did seem to help out with some road noise and reduced a bit of vibration in the doors of my car.It was easy to install and the adhesive sticked fairly well but I feel oddly that it could of been stickier. Overall I’m happy with this.

    Reviewer: mathew
    Rating: 5.0 out of 5 stars
    Title: Great product
    Review: Awesome product worked great and seamed to be good quality.

    Reviewer: Gil
    Rating: 5.0 out of 5 stars
    Title: Affordable sound barrier
    Review: The insulating roll was purchased to cover the interior hood of a car. The factory insulation was sagging and not staying in place, causing a nuissance when servicing the vehicle. The insulation was easy to installvafter cleaning the mating surface. Although thinner than the factory insulation, it foes a better job in reducing the audible engine noise and appears to insulate heat very well. I did not buy enough for my project and required a second roll. Definitely recommend it as it works well at a fraction of what similar insulation rolls cost.

    Reviewer: kevin
    Rating: 3.0 out of 5 stars
    Title: Don’t expect great results.
    Review: Bought this on a budget. One door in my car has high end dynomat. (Swapped the door from a donor car after an accident and the door already had high end sound Mats in it) this does help “some”, but not much. Spend the money on a higher quality product if you want more than mediocre results

    Reviewer: Alex Ped
    Rating: 5.0 out of 5 stars
    Title: Great product for sounds denting and weather proofing
    Review: Works really well with noise cancelling pretty easy to install I would recommend using a razor or something sharp to cut it

    Reviewer: Rod
    Rating: 5.0 out of 5 stars
    Title: Sound deadening
    Review: Works good, very sticky

    Reviewer: Carolle Reimer
    Rating: 5.0 out of 5 stars
    Title:
    Review: Works as it should. Get it right. It will not come off once it sticks

    Reviewer: Rock Dubois
    Rating: 5.0 out of 5 stars
    Title:
    Review: Coupe le son très bien

    Reviewer: Michele
    Rating: 5.0 out of 5 stars
    Title:
    Review: Ottimo prodotto

    Reviewer: jerome andrieux
    Rating: 5.0 out of 5 stars
    Title:
    Review: Article de bonne qualité conforme à mes attentes

    Reviewer: Manfred
    Rating: 5.0 out of 5 stars
    Title:
    Review: Damit habe ich den Getriebetunnel und die Heckklappe meines 4×4 isoliert.Das Material ist leicht zu verarbeiten. Es kann exakt und einfach mit einer Schere zugeschnitten werden. Der Kleber ist sehr stark, einmal aufklebt – keine Chance auf Korrektur. Man sollte also die zugeschnittenen Teile vor dem Abziehen des Papiers vorher testweise anprobieren. Optisch macht das Material eine sehr guten Eindruck.Wenn ich wieder so ein Projekt vorhabe, würde ich mich für dieses Produkt entscheiden.

  • ACDelco GM Original Equipment A3212C (23321606) Air Filter

    ACDelco GM Original Equipment A3212C (23321606) Air Filter


    ACDelco GM Original Equipment Air Filters are designed, engineered, and tested to rigorous standards, and are backed by General Motors.of the engine. These engine air filters are equipped with a tight seal to help keep unfiltered air from entering the combustion chamber.ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.
    Helps trap airborne particles before they enter the engine
    Excellent filter capacity and efficiency
    Equipped with tight seals to help keep unfiltered air from entering the combustion chamber
    Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
    ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
    GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
    GM regularly updates production and service part designs to integrate new materials and technologies

    Price: $41.07
    (as of Jan 22, 2025 12:48:23 UTC – Details)





    Customer Reviews

    Reviewer: Marcia Fischer
    Rating: 5.0 out of 5 stars
    Title: Good filter
    Review: Good quality filter perfect fit

    Reviewer: Robin Crown
    Rating: 5.0 out of 5 stars
    Title: Perfect for my car
    Review: Easy install

    Reviewer: amanda robinson
    Rating: 5.0 out of 5 stars
    Title: Exactly What I Needed. Easy install
    Review: Saved money just ordering and installing myself. Exactly what I needed.

    Reviewer: Pedro G Martinez
    Rating: 5.0 out of 5 stars
    Title: Perfect fit.
    Review: It fit just right will buy again.

    Reviewer: Tom
    Rating: 5.0 out of 5 stars
    Title: Quality AC Delco Engine Air Filter
    Review: The vendor promptly sent the AC Delco engine air filter. It arrived in excellent condition.

    Reviewer: Amazon Customer
    Rating: 5.0 out of 5 stars
    Title: Perfect fit OEM air filter
    Review: Original equipment replacement, easy to replace, will purchase again.

    Reviewer: Q8nerd
    Rating: 4.0 out of 5 stars
    Title: Its perfectly Fit my 2018 GMC Acadia
    Review: Great OE replacement Air-filter for 2018 GMC Acadia V6 Recommend it 👍🏼Be carful as Amazon Said its wont fit the second generation GMC Acadia V6 but its will perfectly fit and its the correct part number 🤓

    Reviewer: Reviewer in Utah
    Rating: 5.0 out of 5 stars
    Title: Exactly what was described
    Review: This is exactly what I needed and was cheaper than getting from the auto parts store!

    Reviewer: Matt feather
    Rating: 5.0 out of 5 stars
    Title:
    Review: Fit as advertised.

    Reviewer: Juan Carlos Erives
    Rating: 5.0 out of 5 stars
    Title:
    Review: Excelente

    Reviewer: Nour H.
    Rating: 4.0 out of 5 stars
    Title:
    Review: The filter came clean and unopened but the package was damaged

    Reviewer: James McCoy
    Rating: 5.0 out of 5 stars
    Title:
    Review: Awesome quality, Love OEM parts!

    Reviewer: Horvath I.
    Rating: 3.0 out of 5 stars
    Title:
    Review: Advertised to a car ,cadillac cts what uses a different filter.This is not compatible

  • KUNCAN EC5 Jump Starter Cable with Battery Clamps – 12V Replacement Alligator Clips to EC5 Connector Car Jumper Cable for Emergency Portable Car Jump Start Battery Booster Cable 10AWG Wire

    KUNCAN EC5 Jump Starter Cable with Battery Clamps – 12V Replacement Alligator Clips to EC5 Connector Car Jumper Cable for Emergency Portable Car Jump Start Battery Booster Cable 10AWG Wire

    Product Description

    KUNCAN 12V Replacement Alligator Clips to EC5 Connector Car Jump Start Cable

    Replacement jump starter Cable 970x600Replacement jump starter Cable 970x600

    KC-20 300x400KC-20 300x400

    KUNCAN LogoKUNCAN Logo

    KUNCAN Brand: Established in 2005, KUNCAN is a leading designer, manufacturer and supplier of the high-quality products. We provide cable solution for customers in USA, Euro, Asia and so on.

    KUNCAN Quality: We insist on using pure copper as cable conductor and RoHS material. We keep developing new product to meet customer’s increasing demand.

    KUNCAN Promise: 24 hours passionate replication √; 30 days freely return and exchange √

    Any questions, please feel free to let me know.

    KUNCAN EC5 Jump Starter Cable with Battery Clamps – 12V Replacement Alligator Clips to EC5 Connector for Emergency Portable Car Battery Booster Cable

    This Battery jumper cable is designed to serve as a jump starter replacement cable clamp set for most brands of 12V mini portable jump boxes. Ideal for jump-starting a dead or weak car battery.

    Connector A: Strong Alligator Clamp Clip Connector B: EC5 Female Plug (Fit for most car jump portable starters with EC5 male port) Wire Guage: 10 AWG Conductor: Tinned copper (Better than pure copper) Total length: about 37cm Input: 12V Operating temperature: 0 ℃- 60 ℃ Support up to 20000mAh Power bank at 600Amp Current (<3 seconds)

    KC-20 300x300KC-20 300x300

    Durable Full Copper Clamps

    ABS plastic thickened and long protective cover with metal hardware Alligator Clamps. Red/black insulated exterior ensures quick visual identification for easy set-up.

    KC-20 300x300 2KC-20 300x300 2

    EC5 Adapter & Match Perfectly

    The connecting part has been molded to prevent the plug from disparting due to repeated plugging and unplugging. Standard EC5 Female Plug is compatible with most car mini jump portable starters, and mobile chargers to jump-start a dead or weak car battery.

    Tinned Copper CableTinned Copper Cable

    10AWG Tinned Copper with Sillicon Insulation

    Tinned copper is primarily used for protection against oxidation and corrosion. At high temperatures, the corrosion resistance of copper declines. Corrosive copper wire is less efficient at moving electricity and can cause safety hazards. The tin coat is valuable for protecting the wire in this state. Tinned copper can last up to 10 times longer than bare copper but has the same conductivity.

    Usage of Car Jump Starter:

    1. Connect the red battery clamp of jumper cable to the vehicle’s positive (+) battery and connect the black to the negative pole.

    2. Plug the cord of the jumper cable into the jumper starter’s socket.

    3. Start the vehicle.

    Cautions:

    1. Do not reverse the operation sequence of the jump starter.

    2. Do not use jump starter to start the vehicle if the number of battery indicators is less than 3 to protect the jump starter from damage.

    3. Do remove the product from the vehicle within 30 seconds after the vehicle starts, or it may cause security incidents.

    4. Please be careful when using this product, this item can NOT be overloaded. Please check your device’s power before using it.

    5. Note: Please check your power bank if it can support your car.

    Add to Cart

    Add to Cart

    Add to Cart

    Add to Cart

    Add to Cart

    Add to Cart

    Customer Reviews

    4.5 out of 5 stars

    727

    4.7 out of 5 stars

    1,366

    4.6 out of 5 stars

    73

    4.5 out of 5 stars

    413

    4.5 out of 5 stars

    431

    4.6 out of 5 stars

    551

    Price

    $9.99$9.99 $8.99$8.99 $12.99$12.99 $8.99$8.99 $7.99$7.99 $8.99$8.99

    Length
    0.5FT 2FT 12FT 3FT 3FT 6FT

    Cable Gauge
    Silicon 10AWG SPT-2 16AWG/2C SPT-2 16AWG/2C SPT-2 16AWG/2C SPT-2 16AWG/2C SPT-2 16AWG/2C

    Fuse
    NO 15A 15A 15A 15A NO

    Dustproof Cap
    NO


    NO

    Add to Cart

    Add to Cart

    Add to Cart

    Add to Cart

    Add to Cart

    Customer Reviews

    4.6 out of 5 stars

    1,028

    4.7 out of 5 stars

    1,005

    4.6 out of 5 stars

    131

    4.7 out of 5 stars

    809

    4.9 out of 5 stars

    133

    4.5 out of 5 stars

    102

    Price

    $7.99$7.99 $15.99$15.99 $16.66$16.66 $9.99$9.99 $7.99$7.99

    Length
    0.3FT 25FT 26FT 1FT 6FT 12FT

    Cable Gauge
    SPT-2 16AWG/2C SPT-2 16AWG/2C SPT-2 14AWG/2C SVT 18AWG SJT 18AWG SPT-2 18AWG

    Fuse
    15A NO 15A NO NO NO

    Dustproof Cap
    NO

    NO NO NO NO

    【Replacement Jump Starter Cable】KUNCAN Battery jumper cable designed to serve as a jump starter replacement cable clamp set for most brands of 12V mini portable jump boxes. Compatible with most car mini jump portable starters, and mobile chargers to jump-start a dead or weak car battery.
    【Specifications】Wire: 10 AWG, OD 5.5mm, Jacket: Silicone Rubber. Connector: EC5 Female Plug. Compatible with most 12V battery booster jumper with EC5 male output.
    【High-Quality 】Strong alligator clamps with tinned copper material cable (better than pure copper), make sure great-quality and safety protection.
    【Eazy to Use】 ① – Connect the red battery clamp of the jumper cable to the vehicle’s positive (+) battery and connect the black to the negative (-) pole; ② – Plug the cord of jumper cable into the jumper starter’s socket; ③ – Start the car and remove the clamps.
    【PAY ATTENTION PLEASE】Do NOT reverse the operation sequence of the jump starter. Please be careful when using this product, this item can NOT be overloaded, check your device power before using, please. Do remove the product from the vehicle within 30 seconds after the vehicle is started, or it may cause security incidents. Note: Please check your power bank if it can support your car.

    Price: $9.99
    (as of Jan 22, 2025 11:44:23 UTC – Details)





    Customer Reviews

    Reviewer: kevin zetts
    Rating: 5.0 out of 5 stars
    Title: Works great in Halo
    Review: I have a halo jump starter. I got it off eBay real cheap. It didn’t come with the jumper cable. I purchased this one and it fit like it wade for it. Unfortunately I had to use it already too. But it worked flawlessly. So if you don’t have this or need a replacement, here ya go. Easy to use.

    Reviewer: 68firebird
    Rating: 5.0 out of 5 stars
    Title: Fit my CAT jumper box perfectly
    Review: Good quality and fit my CAT jumper box perfectly

    Reviewer: Johnny & Rebecca C.
    Rating: 5.0 out of 5 stars
    Title: Works Great
    Review: Works great! Just make sure to remove once the vehicle has started. And as always because it doesn’t have the fail-safe feature be careful so that the positive and negative do NOT touch each other when connected to the booster.

    Reviewer: Travis William Trafka
    Rating: 4.0 out of 5 stars
    Title: They pinch fingers if screwing around with them
    Review: Nice price. They seem durable, haven’t used them yet.

    Reviewer: T L Reid
    Rating: 5.0 out of 5 stars
    Title: Ordered
    Review: I was glad the description had a photo of the plug end! I received it timely and it fit. Thank you!

    Reviewer: kindle fire
    Rating: 5.0 out of 5 stars
    Title: it worked
    Review: fit perfect and worked

    Reviewer: Shane
    Rating: 5.0 out of 5 stars
    Title: Charger cables
    Review: Good product fits perfectly and good price

    Reviewer: Amazon Customer
    Rating: 1.0 out of 5 stars
    Title: Polarity reversed
    Review: The clamps are good. The wires are good. The polarity is reversed and I was not aware. I hooked them up to jump a lawn mower and there was a pop. Sparks and smoke. I was able to quickly disconnect the clamps before my jump pack was damaged. The battery post was damaged though.

    Reviewer: GUY DESAULNIERS
    Rating: 5.0 out of 5 stars
    Title:
    Review: Identique à l’original

    Reviewer: PappaP
    Rating: 5.0 out of 5 stars
    Title:
    Review: Cable pulled out of plug on the original ones. Bought these at a good price and fit perfectly. Must of been a sign…I needed to boost my truck shortly after.

  • Car Heater,12V 200W Car Heaters for Vehicle,2-in-1 Fast Heating Windshield Defroster,Portable Car Heater that Plugs into Cigarette Lighter,360° Rotatable (Orange)

    Car Heater,12V 200W Car Heaters for Vehicle,2-in-1 Fast Heating Windshield Defroster,Portable Car Heater that Plugs into Cigarette Lighter,360° Rotatable (Orange)

    Product Description

    portable electric heater for carportable electric heater for car

    car space heatercar space heater

    12volt heater for vehicle12volt heater for vehicle

    car plug heaterscar plug heaters

    12v car heaters that plug in cig lighter12v car heaters that plug in cig lighter

    car plug in heatercar plug in heater

    【High Power & Fast Heating】 Our 12v heater adopts antioxidant alloy wire, 200W high power rapid heating, effectively removes frost and water mist on the windshield, providing you with a clear view of the road, and at the same time increase the temperature inside the car, so that you can enjoy a safe and warm driving experience in the cold winter
    【Safe and Durable】This portable car heater and defroster is made of ABS and polymer heat-resistant hard plastic with high quality cables for durability, long service life, energy saving and low noise. The 12 volt car heater is designed with cigarette lighter plug, built-in fuse, automatic power-off protection, safer to use
    【Cold and Warm Dual Use】Available year-round, our car heater 12v has two modes: heating and cooling. All you have to do is change the switch and hot or cool air will instantly blow as you need it. Not only is this 12 volt heater ideal for defogging and defrosting windshields, but it can also be used as a cooling fan in the summer. The unique 360° swivel bracket allows you to adjust the air vents to any angle to ensure optimal heating or defrosting
    【Widely Compatible】This automotive heater is suitable for 12V car,widely used at cars,taxis,SUV,light trucks,jeeps,vans,and more.The car portable heater is small and exquisite, can be placed anywhere in the car without blocking the view inside the car
    【Ideal Gift】The 12v heater for car is not only a practical item, but also a symbol of warmth and care, suitable for bringing warmth to relatives and friends in the cold season. Very suitable as a car companion for your family or friends, make them safer and more comfortable to drive
    【Quick and Easy Installation】 You can put the 12v car heater on a non-slip mat, or fixed with the included double-sided tape. Before fixing, wipe the dust clean and keep it dry, and then paste it, which will be more firm and strong

    Price: $26.99
    (as of Jan 22, 2025 10:32:19 UTC – Details)





    Customer Reviews

    Reviewer: Grace Churchill
    Rating: 5.0 out of 5 stars
    Title: This portable heater worked so much better than I expected!
    Review: I wasn’t sure how well this would work but thought it might be a good addition to the things I have in my vehicle for cold winter nights. Those cold winter nights fog up and sometimes ice up your inside windows causing me to start and run the vehicle for a long time before I can even see out of it clearly. The biggest problem is waiting for the engine to warm up and begin providing hot air. We had a chilly damp night the other night and this portable car heater really stood up and did what it needed to do. I was amazed at how fast it heated up And got right to work defrosting all of my windows. I was on my way about three times faster and will definitely keep this in my car all the time so that I’m not sitting around with my engine running and wasting gas.

    Reviewer: Geoff Ables
    Rating: 5.0 out of 5 stars
    Title: Surprisingly Good
    Review: I admittedly had low expectations for this device. My older truck is very drafty and I wanted something to keep me a little warmer on winter rides. It plugs in easily and blows out hot air within just a few moments. The mounting gear requires you stick something onto your dashboard – I just have this sit on the center console to avoid that.

    Reviewer: parker chad
    Rating: 5.0 out of 5 stars
    Title:  It is a savior in cold weather!
    Review: I bought this car heater defroster and it is a savior in cold weather. The high power and fast heating makes defrosting the windshield very easy. It’s compact and easy to install with the included suction cup bracket that holds it securely in place. I love that it’s plug and play and the 360 degree adjustable base makes defrosting the windshield very easy. All in all, this is an affordable solution for winter driving.

    Reviewer: Tameka Brown
    Rating: 5.0 out of 5 stars
    Title: Great for quick defrosting
    Review: This car heater is great for quick defrosting, especially when I’m in a hurry. I parked my car outside, so I often wake up in the morning to see a frosted windshield. This heater helps to clean it up in a few seconds, allowing me to see a clear view in just a few minutes.

    Reviewer: helene
    Rating: 5.0 out of 5 stars
    Title: A very useful little helper
    Review: This portable car heater warms up quickly and is perfect for cold mornings. The defrost function cleans the windshield quickly and makes my morning commute easier. It is compact and easy to carry. It’s a really useful little helper for me who often drives in winter mornings!

    Reviewer: Jack Stovall
    Rating: 5.0 out of 5 stars
    Title: A good solution for car windshield frosting
    Review: The cold winter has arrived. Every morning when I drive to work, the frost on the car window takes a long time to melt. This car heater can help me solve this problem. It can quickly increase the temperature inside the car. Hot air can quickly remove frost from the windshield, ensuring driving safety. This product is a 2-in-1, with fast heating and cooling. I tried the cooler and it worked very well. The heating effect is better. Overall, the product is easy to install and use. This is very helpful for driving safety and is worth recommending.

    Reviewer: Anita Bender
    Rating: 5.0 out of 5 stars
    Title: It heats up fast
    Review: My old car’s heater wasn’t working and I bought this car heater and I was amazed at the results. It heats up my car in minutes and also has defrost and defog features so I never have to scrape my windshield again.

    Reviewer: Kathy Horvath
    Rating: 5.0 out of 5 stars
    Title: Practical design and easy installation
    Review: This portable car heater is very suitable for starting cars in cold weather. It is plug and play with instant heating, keeping you warm and allowing you to quickly thaw windows. Compared to other products, its stylish and compact design makes it look very attractive. Its user-friendly design is great, just plug it into a lighter socket and turn on the power to use it. The 360 degree adjustable bracket is perfect for easily defrosting the windshield and even heating foggy windows. This is very suitable for me to use when I go to work in the morning, so I don’t have to wait in the car for defogging and defrosting. Overall, this will heat up to a comfortable temperature within seconds and clear the fog and frost on the windows in a gentle breeze! The effect far exceeded my expectations!

  • ACDelco GM Original Equipment PF2262G Engine Oil Filter and Cap Seal (O-Ring)

    ACDelco GM Original Equipment PF2262G Engine Oil Filter and Cap Seal (O-Ring)


    ACDelco GM Original Equipment Engine Oil Filters are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These Filters help ensure a clean supply of oil to engine components. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.
    Helps keep abrasive particles away from bearings and other engine hydraulic components
    Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
    ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
    GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
    GM regularly updates production and service part designs to integrate new materials and technologies

    Price: $19.58
    (as of Jan 22, 2025 09:22:24 UTC – Details)





    Customer Reviews

    Reviewer: Mike M.
    Rating: 5.0 out of 5 stars
    Title: Works great on 2016 Colorado Duramax
    Review: I’ve been ordering this filter for 2+ years (6-7 times so far)

    Reviewer: Marci McCall
    Rating: 5.0 out of 5 stars
    Title: Great fit
    Review: Good quality easier install great value

    Reviewer: Secret Agent
    Rating: 5.0 out of 5 stars
    Title: Perfect Replacement
    Review: I generally don’t go OEM for oil filters, but for the Baby Duramax I think that’s a good idea. These are just what the engineer ordered.

    Reviewer: Robert Banks
    Rating: 5.0 out of 5 stars
    Title: Stock filter
    Review: Works perfectly

    Reviewer: Griffin
    Rating: 5.0 out of 5 stars
    Title: Oil filter
    Review: Perfect fit for my diesel Chevy Colorado. Easy to install. Make sure you have a 27mm socket for the fuel and oil filters.

    Reviewer: J. E.
    Rating: 4.0 out of 5 stars
    Title: No cap provided
    Review: Everything was great! But not according to description … was filter only, no replacement cap, was able to use, but like to replace plastic cap when I can, but not this time

    Reviewer: R. L.
    Rating: 5.0 out of 5 stars
    Title: Repeat buyer
    Review: As advertised. Saves me $40 every time I get one.

    Reviewer: Joe D
    Rating: 5.0 out of 5 stars
    Title: OEM part, perfect fit
    Review: The part is OEM as stated. I would never use an aftermarket fuel filter in a Diesel, the injectors are very expensive to replace. The job is a bit messy but not much worse than an oil change.

    Reviewer: Mark Owens
    Rating: 5.0 out of 5 stars
    Title:
    Review: Use the best products for my vehicles

    Reviewer: BigT
    Rating: 5.0 out of 5 stars
    Title:
    Review: OEM product, works well.

    Reviewer: R Zoo
    Rating: 5.0 out of 5 stars
    Title:
    Review: This is a quality filter, and a perfect fit as a replacement. Good price as well. I highly recommend this oil filter.

    Reviewer: London
    Rating: 4.0 out of 5 stars
    Title:
    Review: Same as some other people mentioned, when I bought it, said cap included, which it was clearly Not!, think that has been corrected since then, filter is great, no issues