Blog

Lichamp 10 Pack Yellow Automotive Refinish Masking Tape, 1.4 Inch x 60 Yards x 10 rolls (600 Total Yards)

***IMPORTANT: After sticking the tape, proper pressure can effectively improve the stickiness.
Masking tape should take into account the balance between the continuous stickiness and easy to tear with no residue. If you want strong adhesion when you use it, you can press along the tape properly with your hand after the tape is affixed.***

Directions for Use
Tape is designed for Indoor use – exposure to sun and heat may cause tape to become more difficult to remove.
Make sure surfaces are thoroughly clean and dry before applying masking tape.
Some surfaces, such as rubber gaskets and moldings, should be cleaned with a solvent to remove residual release agents from the manufacturing process before applying masking tape.
For best adhesion, surface temperatures should range from 60°F to 90°F when tape is applied.
For easier application and removal, apply long continuous strips of tape in flat, straight areas and break the tape often when going around contours or curves such as wheel arches.
The objective when back masking and over-taping is to keep the tape lying flat and rolled back, away from the paint edge in order to produce the cleanest look.

Specifications:
Material: Crepe paper
Color: Yellow
Width: 1.4 inch
Length: 60 Yards x 10 rolls (600 Total Yards)
Inner core size: 3 in.
Adhesion to Steel 33 oz/in
Tensile Strength 26 lbs/in
Elongation at Break 9%
Temperature Use Range Up to 250°F (121.1°C) for 30 mins
Tape Thickness 6.3 mils (0.16 mm)
Store product in the original carton under normal conditions of 70°F and 50% relative humidity.

Package Dimensions ‏ : ‎ 9.88 x 8.11 x 5.28 inches; 4.34 Pounds
Date First Available ‏ : ‎ August 9, 2019
Manufacturer ‏ : ‎ Lichamp
ASIN ‏ : ‎ B083P4NPW1
Country of Origin ‏ : ‎ China

Lichamp Automotive Refinish Masking Tape is a yellow crepe paper masking tape designed specifically for excelling at all general masking applications in the collision repair industry (cars, trucks, other specialty vehicles) for general paint masking
Its robust paper backing resists solvents and moisture while being flexible enough to fit most curves and contours. The proprietary rubber-based adhesive formula allows the tape to stick and say on a variety of surfaces
Easy to tear and remove with no residue left behind, no need to worry about cleaning up sticky spots on walls after painting or on items that you have labeled, good holding power to help resist lifting or curling, special backside treatment provides easy to use controlled unwind
General purpose masking tape provides excellent adhesion to a wide variety of surfaces in a number of fields, light bundling, packaging and closing, and light duty masking and sealing etc.
Stick quickly and hold reliably, can be easily removed without leaving a sticky residue behind, no color transfer can be widely used in various applications, such as decorative painting, color separation, masking, tile seam, label mark and art painting

Price: $37.99
(as of Jan 22, 2025 23:00:50 UTC – Details)

Customer Reviews

Reviewer: Cody
Rating: 5.0 out of 5 stars
Title: Good Product
Review: great tape, works for my car painting needs. If you put this on a car body panel, DO NOT LEAVE OUT IN THE SUN!!! It will melt to the body panel and you will be scraping for days

Reviewer: keith collins
Rating: 5.0 out of 5 stars
Title: economical tape
Review: worked fine will reorder

Reviewer: Amazon Customer
Rating: 4.0 out of 5 stars
Title: Actually sticks and stays
Review: I didn’t expect it to hold in place. I believe it was pretty reliable and sturdy.

Reviewer: CHEATAH
Rating: 5.0 out of 5 stars
Title: Good for price
Review: I really like how it sticks and come off when finished with it

Reviewer: Item did what it was suppose to . Can’t complain
Rating: 3.0 out of 5 stars
Title: No title needed
Review: Wasn’t that good of tape . Didn’t stick good . Wouldn’t not recommend buying it .

Reviewer: emory
Rating: 5.0 out of 5 stars
Title: Better quality than expected
Review: Worked well for auto painting

Reviewer: Christopher E Werth
Rating: 1.0 out of 5 stars
Title: Not for automotive use
Review: This does not compare in any way to the 3M brand. It does not stick hardly at all, it is thin and now I have 9 1/2 rolls of tis in the trash can. I couldn’t even give it away.

Reviewer: Rock
Rating: 5.0 out of 5 stars
Title: Does the job!
Review: I’ve used this tape for years for all of my Cabinet finishing/Refinishing. Gar better value than the Green 3m solvent tape that I used to use. Great Value and Great Solvent Tape. The release is far longer with this tape than the 2060 green 3m tape.

Product Description

200 Pcs Touch Up Paint Brushes, Blue(50pcs) Green(50pcs) Purple(50pcs) White(50pcs)

Specification:

Type: Touch Up Paint Brushquantity: 200pcscolor: blue(50pcs) green(50pcs) purple(50pcs) white(50pcs)

Lint Free: The fine automotive repair swabs remain free of lint and dust for a clean and precise finish to your paintwork.
Package Includes: Total of 200 pieces.4 sizes: 1.0mm (super thin), 1.3mm (thin), 1.8mm (regular) and 2.5mm (rough).Each size are different colors for clear identification.
Fine Repairs: Finely and precisely repair small areas of paintwork damage with the mixed pack of touch up tips. The disposable micro applicators are particularly well suited for car paint, for example, to fix stone chips or damage from hail stones.
Flexible Heads:Cotton tipped applicators have compacted tips, which can be easily bent to any desired angle for those hard to reach areas that brushes and cloths just can’t reach.
Variety of Uses: As well as touching up car and bike paint work, the detailing tips are ideal for automotive paint touch up, arts and crafts, various DIY work, and car detailing on some equipment, as well as daily needs.

Price: $8.99
(as of Jan 22, 2025 21:50:32 UTC – Details)

Customer Reviews

Reviewer: Jess S
Rating: 5.0 out of 5 stars
Title: Perfect
Review: Used for daubing on touch up car paint for knicks and scratches. Single use, use and toss. Work perfect.

Reviewer: Mario Escalera
Rating: 5.0 out of 5 stars
Title: LOts of them
Review: Well worth the price!! Lots of brushes and really are of different size!! Like that they come in a storage box.

Reviewer: Hap
Rating: 4.0 out of 5 stars
Title: Really handy little things, even though the tips sometimes give up
Review: Really great for touching up rock chips and other “pinpoint” paint jobs, and I’m happy to always have a box on hand. Very well sized for that sort of work. Not being a brush as such, they are better for dapping rather than feathering. The tips do tend to gum-up/disintegrate/come off if used for very long, but after all they are intended as cheap little throwaways and they work just fine as that.

Reviewer: R. Hamilton
Rating: 5.0 out of 5 stars
Title: Great for paint chip touch up.
Review: If you have any paint chips on your car you want to touch up, don’t use the little paint brush that comes with the touch up paint. Use these to get a little paint off the brush and dab the chip with these. Much more control and better final outcome.

Reviewer: Amazon Customer
Rating: 5.0 out of 5 stars
Title: It was for work
Review: I’m a Detailer so they were just what I was looking for & work awesome

Reviewer: Norm Koger
Rating: 3.0 out of 5 stars
Title: Precision swabs – they work. Not 200 though…
Review: I’ve tried these for a couple of things – spot painting with enamels, CA glue accelerators, and I’m happy with them. No regrets. Five stars if the package actually contained 200 pieces but mine arrived with 176 pieces. Annoying. Guess they figure we won’t bother to count.

Reviewer: Gelo
Rating: 5.0 out of 5 stars
Title: Touch up paint
Review: Used these to touch up a friend’s bumper, super easy to use, and quality was more than ok

Reviewer: Derrick
Rating: 5.0 out of 5 stars
Title: These are great
Review: I wish I had known about these things a long time ago. There are so many uses besides to touch up paint. But they do a great job with paint touch ups. And there are plenty to use of different sizes.

Reviewer: RB
Rating: 5.0 out of 5 stars
Title:
Review: The description matches the Item as received. Superb quality product!!

Reviewer: Steve Benge
Rating: 5.0 out of 5 stars
Title:
Review: These tips make the job of applying the paint to a stone chip so easy.Also there are different sizes.

Reviewer: Amazon Customer
Rating: 5.0 out of 5 stars
Title:
Review: Fabulous

Reviewer: Suikoden
Rating: 2.0 out of 5 stars
Title:
Review: I got a few of these micro brushes with a car chip repair kit and they were the best things ever. Thought I would order some on Amazon but didn’t expect quality to be so different. The heads easily fall off on these Amazon ones and you get loose fibres sometimes. As for the one that came with the chip repair kit has none of these problems and I have rinsed those brushes in acetone a few times. I have contacted the chip repair people and buying brushes from them instead for a bit more money but worth it. Only thing is I wasted money on these that will just go in the bin.

Reviewer: Canuck
Rating: 4.0 out of 5 stars
Title:
Review: They seem to be random sizing if any different from each other but good for the price.

MAQIHAN paint filter strainer – Helps you work efficiently by preventing lumps in the process.
The spray gun is clogged during the application of paint, and the surface of the applied paint is rough and uneven. This is most likely due to the fact that the paint is not filtered. Filtering out impurities and particles in paint is an essential step when we perform paint work.

Product Name：Paint Strainers Cone
Brand:MAQIHAN
Material：Paper and nylon
Size：Mesh size is 150μm
Quantity：There are 100pcs paint strainers in the package

Applicable: The mesh diameter of 150 microns can be used to filter automobile paint, furniture and wood machinery spray paint, and is suitable for spray guns with a caliber of 1.3-2.0. It can be used to filter impurities and particles in various paints, varnishes, and resins to prevent spray clogging and improve work efficiency.
Disposable: Compared with traditional screens, paper funnels have the same filtering function and are a more economical choice. They can be discarded directly after each use and do not need to be cleaned because they are made of paper , is a more environmentally friendly choice.

How to Use:If the amount of paint you need to filter is relatively small, less than 1 pint, you can hold the filter directly, pour the paint that needs to be filtered into the filter paper, and replace it with a new filter paper when the particles have blocked the mesh.
If the amount of paint you need to filter is large or thick, it is recommended to use it with a stand and a silicone funnel. Put the filter paper inside the funnel and support it with the stand and free the hand holding the filter paper.

Great Quantity & Excellent Price:There are 100pcs paint strainer in the package.After use, you can replace them at any time. Fully meet your daily needs
Size and Material:The paint filter opening is 6 inches in diameter. The funnel is made of paper material, and the bottom is a high-quality nylon filter to help filter out impurities
Paint Filter:Ultra fine mesh strainer helps to filter out impurities and particles in the paint, so that you will not be disturbed by dust particles during the painting process, prevent the paint sprayer from clogging, and ensure the paint is evenly applied
Disposable:After other filters are used, cleaning is a big trouble. MAQIHAN funnel filter is made of wooden materials, which can be thrown away directly after each use. The sufficient quantity can meet the basic needs of daily life
Wide range of applications:Filters are suitable for all types of solvents or water-based paints, varnishes, stains and other liquids. Ideal for a variety of craft paints and hand painting

Price: $6.99
(as of Jan 22, 2025 20:46:22 UTC – Details)

Customer Reviews

Reviewer: Joanna Beasley Johnson
Rating: 5.0 out of 5 stars
Title: Great product
Review: These work great for use with my paint spray gun.

Reviewer: Richard Pearson
Rating: 5.0 out of 5 stars
Title: Does what it’s made to do
Review: Does a pretty good job of straing paint before going into my sprayer.

Reviewer: SteveF
Rating: 5.0 out of 5 stars
Title: Low cost but effective
Review: I use these for filtering resin back into the bottles. They hold together and do the job.

Reviewer: JoeGarza
Rating: 5.0 out of 5 stars
Title: Great price
Review: They work great

Reviewer: Arthur Simitian
Rating: 1.0 out of 5 stars
Title: cheaply made
Review: cheaply made does not hold up while using paper thin turns to mush I would not recommend buying this product.

Reviewer: m.
Rating: 5.0 out of 5 stars
Title: Does th job!
Review: Purchased to go with my new paint sprayer. Removes all debris from paint .

Reviewer: Amazon Customer
Rating: 3.0 out of 5 stars
Title: Cheap
Review: Not great quality. Very thin! Price was cheap. So you get what you pay for.

Reviewer: Carlos Aguilar
Rating: 5.0 out of 5 stars
Title: Buen producto
Review: Me sirvieron muy bien

Rust-Oleum Automotive Truck Bed Coating Spray is a textured finish that forms to the contours of a truck bed. Ideal for recoating and restoring worn, unfinished or previously finished metal truck beds. The advanced formula helps prevent truck bed damage caused by scratches, rust and weather. Also ideal for running boards, bedrails and more. Use outdoors or in a well-ventilated area.
Ideal for use on truck beds, trailer floors, fenders and other metal surfaces
Stops Rust formula provides long lasting protection with any-angle spray comfort tip that reduces finger fatigue and makes it easy to reach hard to paint places
Dries to the touch in 1 hour and covers up to 20 sq. ft. per can
Offers superior durability and can be used on bare or primed metal truck beds
Textured non-skid finish is resistant to scratches and the outdoor elements

Price: $32.32
(as of Jan 22, 2025 19:35:52 UTC – Details)

Customer Reviews

Reviewer: SClin
Rating: 5.0 out of 5 stars
Title: Great product, great price
Review: I purchased a case of Rust-Oleum Bed Liner, the product did a great job for the project I had for my truck. Make sure you prep the area you are going to coat well by sanding/scuffing the area then applying some kind of primer/filler to the area as well. It dries fast which I say to touch like 30mins, did apply 3 coats for the best results. I do say make sure there is open air flow due to the overwhelming smell of the spray. Spraying was easy just make sure to give some distance also use full motion back and forward best results if not will give you drip spots. It’s not to rough so easy to wash.Will I buy again for more things on my truck yes I will, the only down side was 2 cans did explode in delivery of the product. Rust-Oleum did a great job about refunding my money equivalent to the lose product I did received.

Reviewer: David Coomes
Rating: 5.0 out of 5 stars
Title: Worked like a champ
Review: Had a jeep with rusted out rocker panels. Stripped out most of the rust including grinding the surface rust. Then rednecked the rocker panels using chicken wire and spray foam. After shaping them used this to seal and color the previously damaged area including putting a coat over the sun bleached trim. Not a smooth gloss paint job but for a jeep that will be being beat up on the trails looks real good.

Reviewer: XxExpert ReviewerxX
Rating: 5.0 out of 5 stars
Title: Looks good
Review: It sprays on nice and heavy but you may want to keep a rag handy because the paint gets accumulated on the nozzle and drips if you dont keep it clean or the nozzle may clog itself if you let the spray sit just a few minutes like mi e did. I did 2 coats on a little 6ft nissan hardbody bed with 2 cans, but ran out on the sides of the bed. I think 3 cans is good for that. If this lasts, I am going to do my full size 6ft bed on my truck. I am guessing that would be 4 or 5 cans for 2 coats which is what the can says to do.

Reviewer: DAVE E.
Rating: 4.0 out of 5 stars
Title: Excellent value for cheap jobs, but spray heads SUCK!
Review: On 7/27/16 I bought 2 of these cans on Amazon for $6.50 each as an “Add-On” to use on PRIMED PLYWOOD.First, RUST-OLEUM SUCKS FOR NOT FIXING THE SPRAY CLOGGING ISSUES!!!!I am making an 8” high (above wheel wells) false bed, which extends over the open tail gate, for my 2009 Nissan Crew Cab. This is for 2 reasons.1. Sleep 2 people comfortably.2. Wheel wells prevent efficient packing of the vehicle, particularly with Costco/Home Depot storage tubs. Now I can pack up to 14 pre-organized and labeled camping storage tubs (7 on 7) perfectly, within 5 minutes while packing long things like poles, tools, rods and chairs underneath the false bed. Ratchet strapping is now simple, fast and requires no bungees.1. I bought some 3/8” plywood. Home Depot recommended I used Kilz2 ($17) to prime it.2. I applied 2 heavy coats on the top and 1 on the bottom using 3/4 of a gallon.3. I allowed the paint to set 2 days between coats. Have no idea if that matters.On 8/29/16, today, I used the first two 15oz cans of Rust-Oleum Truck Bed Coating.1. I first weighed both cans without the caps. Can1 = 19oz, Can2 = 19.2oz.2. I used a Rust-Oleum Comfort Grip trigger ($6) which I already happened to have. Having read 90% of all of these reviews, there was no possible way I was going to attempt to use this stuff without a spray trigger.3. I shook both cans at least 4 minutes each over 1.5 hours as I did other stuff. I have no idea if that helped, but I was not taking chances.4. When I began painting it was 87F with 16% humidity.5. CAN1 began sputtering immediately. I kept shaking it upright while I sprayed and did not get any drops until about half way when it started sputtering again. I then turned the can upside down and the spray became very smooth and I did not have to shake it at all, but then drops started falling and became worse as the can emptied. SEE PIC. When the paint ran low, I began doing the 3/8” sides so I could continue painting.6. CAN2 began sputtering immediately and I immediately turned it upside down when I began spraying resulting in paint drops again, but no shaking was necessary. The paint drops are of no consequence whatsoever for this project and will be hidden by the second coat. When the paint ran low, I had to stand the board up to continue.7. Two cans barely covered the 57”x80” (32sf) surface and 3/8” sides in a splotchy manner with numerous small areas not fully coated. 3 cans were required. It will take a minimum of 3 cans to do a second coat correctly.8. After using every possible drop I could, can 1 weighed 4.5oz and can 2 weighed 4.3oz for a net usable amount of 14.5oz and 14.9oz respectively. Woo hooooo!!!9. I compared the grit on the finish with 60/80/100/120/150/240 sandpapers that I had on hand. It was very hard to compare since the painted grit was much more sparse than sandpaper. My best guess would be equivalent to between 80-100 grit.10. This stuff does not compare in any way to the stuff sprayed professionally in truck beds. However, it’s so cheap that you should consider carefully whether you need the professional spray job or the better brush/roll-on versions.TIPS:1. USE A GOOD SPRAY CAN TRIGGER!!! They work great upside down too. I did not get a single drop of paint on my latex gloves while spraying despite shaking the can, and with drops falling.2. Spray the downward area of the item first. Then when the can starts sputtering, you can level the can out towards the sides and effectively use more paint.3. A can might cost you up to a $1 more at Home Depot or Walmart. So don’t worry about under-ordering.*** 30 August 2016; UPDATE/CORRECTION ***I bought an additional 4 cans from my local Home Depot at $7.46 ea, before 10% military discount, for a total of 6 cans, the last one for touch ups.The 6 cans weighed an average of 18.98oz before using (without cap) and ranged from 8.7 to 9.3oz. The 5 used cans weighed an average of 4.2oz after using as much as possible for a net average of 14.84oz of paint per can.When I began painting tonight, it was 88F and 24%RH.CAN3: I neglected to turn the cap to the front after shaking it and began spraying inside the trigger housing. Bummer. I had to clean it up real quick before starting again. I turned it upside down to spray and it began sputtering badly. I turned it back upright and it began spraying smooth until it got down to about 50-60% and then I had to shake it up and down every 10 seconds or so at decreasing intervals.CAN4 worked the same as Can3.CAN5 worked the same also except that it had a much, much better black matte finish then the other 2 cans, which is good because I over sprayed with Can3, and it ran, and was too glossy.TIP 4: How your cans perform depends on the batch, which depends on where you bought it.

Reviewer: Jimmy
Rating: 5.0 out of 5 stars
Title: I put that stuff on everything
Review: I painted bumpers of my old truck and they looked new. Had left over so I painted the plastic headlight surrounds and plastic grill and they looked brand new, painted the old metal frame on gate and it looked new, painted old metal basketball pole and made it look new. Very easy to spray, you have to make a big error for it to run. I painted bumpers more than a year ago and they still look great.

Reviewer: Lou
Rating: 5.0 out of 5 stars
Title: Well worth it
Review: Bought a 2022 Colorado with 14k but the bed was all scratched. It made it look new with a nice coating.

Reviewer: wow can u hook up stars
Rating: 5.0 out of 5 stars
Title: Rims
Review: My Lexus rims are 21 years old and painted them with silver and looked nice the got bad so went to this textured paint and love it and did grill too

Reviewer: denis morin
Rating: 5.0 out of 5 stars
Title:
Review: dispandeux fait la job

Reviewer: jacoby
Rating: 5.0 out of 5 stars
Title:
Review: Perfecto

Reviewer: Denis Lapointe
Rating: 5.0 out of 5 stars
Title:
Review: Good product

Reviewer: Mh
Rating: 3.0 out of 5 stars
Title:
Review: Good quality, but it’s not effective, easy to scratch. To expensive, and it doesn’t cover much per can

Reviewer: Amazon Customer
Rating: 5.0 out of 5 stars
Title:
Review: yes good product not OEM quality but great for touch upsI would order again

From the brand

We want you to go through life without the inconvenience and uncertainty of how to choose a suitable paint spray gun and accessories.

Our paint spray guns and accessories not only atomize finely and spray evenly, but also save you paint and time.

04 HVLP – Spray Gun Set Red-B

Disposable Paint Cup 20oz Kit

1.3mm Pro T110 Paint Gun

04 HVLP – 1000cc Aluminum Cup

SL-200 – Paint Gun Light Combo

04 HVLP – Red-A

04 HVLP – Spray Gun Set Red

04 HVLP – Green-A

04 HVLP – Yellow

04 HVLP – Green

04 HVLP – 1000cc Aluminum Cup

YUZES Spary Gun LED Light

YUZES Spray Gun Holder

23 PCS Spray Gun Cleaning Kit

Perfect as a Christmas Gifts or Birthday Gifts for Fathers, Husbands, DIYer.
65% High Transfer Efficiency: Our HVLP paint spray gun features a 15-hole copper atomizer, ensuring high-precision atomization and achieving an impressive 65% transfer efficiency. This not only allows for an even and smooth spray, but also reduces overspray and saves paint.
Wide Application: Our paint sprayer gun set includes 3 nozzle sets (1.4mm, 1.7mm, 2.0mm) to meet your various needs. It can spray basecoats, clearcoats, thicker and heavier fillers, making it suitable for automotive painting, touch-up jobs, furniture spraying, house wall painting, toy refurbishing, art painting, rust protection.
Air Regulator & Water Oil Separator: The water and oil separator connects to paint airbrushes, air compressors, and other tools, capturing water vapor and oil particles. It extends tool life and ensures cleaner operations. The Air Regulator allows you to have precise air control at the gun for the best and consistent results.
Durability & Adjustable: Experience durability and precision with our car paint spray. Featuring one-piece body, rust-resistant stainless steel nozzle, and solid brass gun cap, our gun can withstand heavy use and harsh conditions. With its HVLP gravity-fed design and three adjustable control knobs, our gun allows for accurate and efficient paint spraying.
Package Include: 1 HVLP Air Spray Gun, 3 Size Nozzle Set(1.4/1.7/2.0mm), 1 Air Regulator with Pressure Gauge, 1 Water Oil Separator, 1 600cc Paint Cup, 3 Cleaning Kit, 10 Paint Strainers, 1 Wrench, 1 Filters Fine Mesh, 240 Inches Seal Tape, 2 Air Hose Connector.
Lifetime Warrnaty: If you encounter any problems while using YUZES Tools, please tell us. Even after the Amazon return window has closed, we offer a lifetime warrnaty service because we believe everyone needs tools and equipment that can be used for years to complete DIY projects.

Price: $38.89
(as of Jan 22, 2025 18:32:17 UTC – Details)

Customer Reviews

Reviewer: Start2hunt
Rating: 5.0 out of 5 stars
Title: This is a solid tool
Review: I purchased this tool so i could shoot primer on plastic decoys. This tools has performed as expected. It is very well built, easy to clean and use.

Reviewer: Tab Lagow
Rating: 5.0 out of 5 stars
Title: Works great
Review: Thought I would try out this spray gun to see how it works. I was completely satisfied! Works great when spaying primer on car. Will be purchasing another one for painting car.

Reviewer: The Roeg’s
Rating: 4.0 out of 5 stars
Title: Very nice paint gun good quality for the price and spays well.
Review: It’s easy to use and if you’re familiar with spray, guns at all, this one is as easy as any. Does have a tendency to spit and sputter at times even when full of paint. Dialing up paint and air pressure just makes clog up. Making the paint thinner didn’t seem to help with full air pressure and then comes out with too much air is far too misty. I have yet got to solve this issue. However, the spraygun works flawlessly about 85% of the time it’s 15% is spent cleaning the needle and nozzle, which does seem to relieve the problem, so it may just be a build up overtime of tiny bits of dry paint on the needle and nozzle. All the accessories are great all fit together nicely, and I highly recommend to a beginner painter, but for a professional painter, you might want to spend a little extra on a better made gun.I give it four stars and recommend it to friends.

Reviewer: Pawel
Rating: 5.0 out of 5 stars
Title: Time saver
Review: Easy to use and clean, no leakages, good spray quality , not to heavy and with so many extras in box

Reviewer: Michael T.
Rating: 5.0 out of 5 stars
Title: WOW
Review: This spray gun is better than what I had paid 3x more for!! Use it weekly and it is all that and more. I would recommend it.

Reviewer: gcervantes9
Rating: 5.0 out of 5 stars
Title: excellent value
Review: Love that it comes with the most used size caps and needles, used the 2.0 for paint job on 2 security screens, both came out beautifully, makes it look like I’ been using spray guns forever

Reviewer: El Barto
Rating: 4.0 out of 5 stars
Title: The results are what matter…right?
Review: I really had no idea how to set up an HVLP gun. So I watched a couple videos on youtube. I painted with Rustoleum Professional oil based paint. It’s pretty thick. Thinned it 8:1. I set the gun to about 70 psi and tried it and the spray pattern was great. I took it to the underside of my homebuilt tunnel hull boat and applied it in two light coats and it sat down nicely and turned out great. Sure beats 3 or 4 days of sand, roll, and tip. Sand, roll, and tip. ETC Only gripe is that the knobs on the gun didn’t seem to do anything to adjust the pattern. And the included regulator didn’t seem to do anything either. I just used the one on my compressor. The overspray was minimal. I almost didn’t even need to hang plastic in my garage. Very pleased.

Reviewer: Newsletter Guy
Rating: 5.0 out of 5 stars
Title: Well Made
Review: Arrived when they said it would. Gun and components look well made. I know others said that the nozzle was on too tight and had a difficult time removing it. Here is what I did and had no trouble. The gun itself is in bubble wrap so I laid in on the floor, placed the gun on the wrap, positioned the wrench on the nozzle, stood on the gun and pressed the wrench with my other foot. loosened up immediately. I have not used the gun yet but will in the next week or so and I might amend this review at that time.