From the brand
Oil Filter Wrench Set
Auto Repair Tools
3-Jaw Gear Puller Set
Brake booster kit comes with a vacuum gauge that can be widely used to test vehicle vacuum systems/as a vacuum sealer. Equipped with a vacuum gauge to help you take accurate readings. Pressure range: 0-30 in/Hg, 0-760 mm/Hg
The hose is made from premium material for resilience, heat resistance and reliable sealing performance, The contoured design of the handle gives you a firm grip during use, so you can operate quickly and comfortably
Handheld Vacuum Pump Kit comes complete with accessories. Includes handheld vacuum pump with vacuum gauge, 4.05 OZ reservoir jar, 4 transparent hoses, 3 different adapters and connectors included to allow you to use this tool kit on cars, bikes, motorcycles and other vehicles
DURATECH brake system bleeding tools enable you to check vacuum operated automotive components, bleeding air from hydraulic systems and siphoning fluids. Creates both pressure and vacuum, it will help make an automotive repair or maintenance task easier
All the tools and accessories are centrally compactly put on a built-in plastic tool case. Perfect for both home and business applications and easy to transport and store
Price: $29.99
(as of Jan 22, 2025 16:16:20 UTC – Details)
Customer Reviews
Reviewer: RWS
Rating: 5.0 out of 5 stars
Title: Works well when properly used
Review: First of all, it comes in a nice, molded case — before you unpack it, note how it fits in or take a picture. When you go to put it away after use, you’ll be glad you did.There are some tricks to using this that are not in the manual. Also, the text of the manual says to connect the reservoir to the pump with a 3″ hose – don’t. Use one of the longer hoses (as it shows in the diagram). I keep a spray bottle of water/dish detergent mix in my garage. I highly recommend this in general and as a lube to make the fittings go into the hoses. Some other reviewers said they had trouble with tubing connections coming loose. I had no such problems because of the soap water I used. Also, it’s not good to allow brake fluid to get sucked into the pump. By using the long tube between the pump and the reservoir, it’s easy to keep the reservoir lower than the pump, so no fluid goes into the pump. I also squirted a little of my solution onto the reservoir O-ring. I don’t know if it needed it, but it made the seal very air-tight, no matter which orientation between jar and cap I used (in contrast to another reviewer who had problems sealing).The pump generated plenty of suction. When working on the car, I only used 10 to 15 psi of suction to keep from emptying the master cylinder too quickly. However, the pump easily gets over 20 psi if it is pumping on a sealed system.So, onward to the actual use. After cracking the front left bleeder on my 67 Chevy, I put my bleeder wrench on the screw and connected the pump. I opened the bleeder a 1/4 turn and was rewarded with a good flow of not too clean brake fluid with “pinpoint carbonation” in it. I think the tiny bubbles was my brake system problem, they caused my car to pull right on moderate braking (the bubbles reduced the brake force on the left). It took only about 3 minutes to do the bleeding – I spent more time jacking up the car, getting the wheel off, etc.I did not see any air leakage back up the bleeder threads as reported by other reviewers. I disagree with the reviewers who suggested putting Teflon tape on the bleeder threads. Introducing a material that wasn’t part of the brake system design could be unsafe. If the bleeder leaks along the threads, consider replacing it with a new one or put a finger full of grease over the outside of the bleeder (thus not inside the brake system). Normally the threads will be wet with brake fluid and won’t pass much air. If it takes a lot of suction to get the brake fluid to bleed out, it is likely an indication of an obstruction in the system such a rust in the brake lines (the flexible hose from the car body to the wheel is particularly prone to rusting up). Clear any such obstructions or the brakes won’t be safe no matter how much you bleed them.I’ve only had it a short time, so I can’t comment on its durability. It seems to be made well enough but keep in mind you don’t get a $100 tool for the price of this set.
Reviewer: Bobcat
Rating: 5.0 out of 5 stars
Title: Comparison mityvac
Review: Compared to the overseas mityvac competitor for the similar product, this American made product. Is $5 cheaper at slightly better or equal quality.Compared to the cheaper models, the product quality is easily worth the value.I find this product to be the highest value per dollar in the brake bleeder kit market currently.
Reviewer: BigB
Rating: 4.0 out of 5 stars
Title: Works, but can be tricky as fills fast.
Review: The pump is easy to set up and operated.The small bottles only hold like 4-6 ounces each and so you have to stop and empty them before you’ve finished pumping out typical volume of normal car reservoir. I had to fill it more than little over 2 x.. would suggest the bottles be 12 or even 14 ounces instead . Did 2 Hondas in same day. Spilled some because the tubing is rather stiff and when trying to transfer the fluid to old container it wants to twist and turn and drip from the end of tube.The included hard shell case is nice touch but it is tight so you must disassemble all the dirty hoses to put it away, a bit challenging after it’s been used.The bottles are so light they will just flip. Helps to have another pair of hands to hold things.Still it’s worth it. Good for consumer. Can use multiple times but not pro level..
Reviewer: C
Rating: 1.0 out of 5 stars
Title: Don’t buy: Even for a cheap tool, this one is bad
Review: I love cheap tools. I’ve got a garage full of cheap tools that have served me well for years. Whether it’s Amazon, the Wal store, H Freight, the big orange box store, or even the OG Sears, I’ve got tools from all those places plus a few car parts stores to boot.With that as context, this may be the worst cheap tool I have ever bought. As in, it literally did not work out of the box. I finally got around to using it today and all I can say is that if you read the negative reviews and still buy this tool, you must not care about your money.In short, don’t buy this. It did not work for me. It could not pull a vacuum to extract the brake fluid. So I had to go back to the old school method of working the brake pedal.It’s too bad because I’m rooting for Duratech. Like I said, I love cheap tools, assuming they actually work at all.
Reviewer: Hugo a sebastian cruz
Rating: 5.0 out of 5 stars
Title: Good hard suction!!!
Review: Use this pump for couple break bleeds and it gets the job done 100%. Like the included hoses and attachments.Extra seals and cup
Reviewer: Sherri Lynn Greco
Rating: 3.0 out of 5 stars
Title: Cheap plastic
Review: Did not work well at allNot great quality
Reviewer: Poersch
Rating: 5.0 out of 5 stars
Title: Worked great!
Review: Took longer to jack up each side and remove the tire than it did to use this tool to pump fresh fluid thru the lines and close it up. Easy driveway DIY with this tool, not sure why it took so long to buy one of these.
Reviewer: BR
Rating: 5.0 out of 5 stars
Title: First ânot a mighty vacâ Iâve found that works
Review: Iâve ordered so many vacuum pumps for just an occasional use (why Iâve not gotten the best: mighty vac $$$$$) and they have all broken or not worked properly right out of the box.This is the first ânot mighty vacâ thatâs been holding up.I DO think it deserves a star knocked off for how itâs impossible to easily put it back in the case without removing the hose from the pump each time.Iâll update if I posted 5 stars too soonâ¦
Reviewer: Ryan Fernandez
Rating: 5.0 out of 5 stars
Title:
Review: Works great, was awesome for bleeding my brakes
Leave a Reply