Product Description
If 24v goes in, will it come out as 12v or 24v?
No transformer, so 24v in, 24v out
Can I charge my vehicle battery with this device?
The male plug is typically your cigarette lighter plug which can supply up to 10A based on the fuse. You can use this plug to charge your battery but at a trickle charge limit. The cigarette plug can cannot handle anything above 10A.
Would this work to run the cars electric engine cooling fan?
It is fused at 15 amps. If your fan(s) draw less amps there is no reason it would not work. Be mindful of wire sizes.
[High Quality] The cigarette lighter plug shell is resistant to high temperature and corrosion, and 16 AWG pure copper wire, which greatly improves the conductivity
[Good Safety] Cigarette lighter plug adapter built-in 15A fuse for overload protection
[Wide Applications] This lighter plug adapter can be used to power CB radios, car vacuum cleaners, tire air pumps, car inverters, electric cooler, car washers, etc
[Easy to Use] The lighter plug adapter red wire is positive and the black wire is negative. Almost all models of cigarette lighter sockets are applicable. When the line is connected, the LED light will light up to avoid multiple operations
[Complete Accessories] The cigarette lighter plug package has 8 built-in 10A fuse tubes, 8 wiring terminals, and 4 protective covers
Price: $6.59
(as of Feb 05, 2025 02:20:52 UTC – Details)
Customer Reviews
Reviewer: Jerry Atrix
Rating: 5.0 out of 5 stars
Title: Poor QA
Review: One of the two male plugs had a short in the wiring. I had to take it apart and repair it.The company read my review and promptly refunded my purchase without my asking. I amended my review from two stars to five stars.
Reviewer: Glynn R.
Rating: 5.0 out of 5 stars
Title: Hooked up and rolling
Review: First ones I got in one of them had a bent loose tab that wouldn’t stay on. Amazon sent a replacement right away and I got both hooked up and working. I replaced the ones on my Tow Brake system and found out that if you connect the wires wrong no juice hits the brake system. I crossed them back working great now.
Reviewer: Alex M.
Rating: 5.0 out of 5 stars
Title: Easy
Review: Easy to use
Reviewer: Lorraine hubiak
Rating: 5.0 out of 5 stars
Title: It works
Review: Got it for renewing wires for putting air in the tires of our vehicles. Rather than buy a new set up Works great. Too expensive.
Reviewer: Dale Ford
Rating: 5.0 out of 5 stars
Title: got here quickly
Review: just fine
Reviewer: R-Dg
Rating: 5.0 out of 5 stars
Title: Not perfect out of the box, but a very good deal.
Review: These work great. They are what they are advertised as being and come with extra fuses, which is really nice. The two things I’d change is 1) dang that LED is bright! At night the led is brighter than anything on the dashboard. Of course you can face it down, so it’s nbd, and perhaps you need it to be visible no matter where it’s facing, especially if you’re using this to power trailer lights (which I may or may not be doing). The second is that the spring for the center contact is more powerful than the springs that make contact with the sides. This is a more serious problem, especially if you’re using this for a critical application, but it’s easily fixed by using a pen or screwdriver and squeezing it between the plastic cylinder and the metal of the side springs to make a more acute bend in them and bow them out. This allows the plug to stick in really firmly so you know it’s not going anywhere.Overall, these feel really solidly made and at the price they’re charging right now (under $7) it seems like you get a lot for what you’re paying. I mean, I think it’d be a fair price if you only got one.
Reviewer: theGiggityGig
Rating: 2.0 out of 5 stars
Title: They are cheap, like the price.
Review: Umm, they aren’t hiding from the fact they’re cheap. Priced accordingly. I got them for about 6 dollars.
Reviewer: TTMD
Rating: 4.0 out of 5 stars
Title: Perfect For Running My Diesel Heater.
Review: I ordered these cigarette lighter connectors to splice into the factory wiring harness for my diesel heater. This allows me many more options as it pertains to powering the heater. I would consider myself satisfied with these cigarette lighter connectors. The quality is decent enough, and they will certainly get the job done. The 14 AWG wire fit perfectly for my application. It is worth noting, however, that the ends of the plug are constructed from what I would consider a cheaper plastic material, and can likely be crushed or broken with relative ease. You will want to take care not to accidentally damage the connector.The wires come with female bullet-splice connectors preinstalled. The manufacturer also includes several male bullet-splice connectors, as well as several spare fuses. Additionally, the wires come pre-equipped with a small, clear piece of silicone tubing. I have two issues with this setup. Number one, you need a special crimping tool to properly crimp the bullet connector, essentially making them useless to most people, and, number two, the manufacturer should have included heat-shrink tubing, as the provided tubing just wants to slide up and down the wires. I wound up going an entirely different route, where in which I cut off the supplied ends, and then spliced and soldered the cigarette lighter connector directly into the harness for my diesel heater. If you want a lasting installation, I would recommend going this route. Outside of this, I have had no further issues with these cigarette lighter connectors. They are working perfectly for me so far, and I have no problem running my diesel heater with them. They must be well insulated because, to my surprise, they donât get hot at all. I also appreciate the built-in power light, and the fact that these connectors are fused adds an extra layer of safety. If you are in need of cigarette lighter connectors for an upcoming project, allow me to recommend these.
