Category: Battery Jumper Cables

PAY ATTENTION PLEASE. This item has its limited, it can’t be overload, hope you can be careful and check your devices specifications before using. Thank you!Specifications:
Total length: about 37cm
– Support up to: 20000mAh Power bank at 600Amp Current (<3 seconds)
– Input: 12V
– Operating temperature: 0 C-60 C
– Wire Guage: 10 AWG – Strong Alligator Clamp Clip with EC5 Feamel Connector (Fit for most car jump portable starters)

Usage of Car Jump Starter:
1. Connect the red battery clamp of jumper cable to the vehicle’s positive (+) battery and connect the black to the negative pole.
2. Plug the cord of jumper cable into the jumper starter’s socket.
3. Start the vehicle.

Cautions:
1. Do not reverse the operation sequence of the jump starter.
2. Do not use jump starter to start vehicle if the number of battery indicators are less than 3 to protect the jump starter from damage.
3. Do remove the product from the vehicle within 30 seconds after the vehicle started, or it may cause security incidents.

KUNCAN Brand:
KUNCAN is a professionalmanufacturer who sells variousmobile phone accessory cables to USA, Euro, Asia and so on.
High quality promise. We insist in using pure copper as cable conductor and RoHS material to guarantee the user experience.
Keep developing new product to meet customer’s increasing demand.
Any questions and problems, please feel free to contact us , we will answer and solve it asap to meet your 100% satisfactory with best service.
【Replacement Jump Starter Cable】KUNCAN Battery jumper cable designed to serve as a jump starter replacement cable clamp set for most brands of 12V mini portable jump boxes. Compatible with most car mini jump portable starters, and mobile chargers to jump-start a dead or weak car battery.
【Specifications】Wire: 10 AWG, OD 5.5mm, Jacket: Silicone Rubber. Connector: EC5 Female Plug. Compatible with most 12V battery booster jumper with EC5 male output.
【High-Quality 】Strong alligator clamps with tinned copper material cable (better than pure copper), make sure great-quality and safety protection.
【Eazy to Use】 ① – Connect the red battery clamp of the jumper cable to the vehicle’s positive (+) battery and connect the black to the negative (-) pole; ② – Plug the cord of jumper cable into the jumper starter’s socket; ③ – Start the car and remove the clamps.
【PAY ATTENTION PLEASE】Do NOT reverse the operation sequence of the jump starter. Please be careful when using this product, this item can NOT be overloaded, check your device power before using, please. Do remove the product from the vehicle within 30 seconds after the vehicle is started, or it may cause security incidents. Note: Please check your power bank if it can support your car.

Price: $9.99
(as of Feb 20, 2025 06:17:29 UTC – Details)

From the brand

Choose More for Your Car

VTOMAN V10 Max Jump Starter

VTOMAN V10 Max Jump Starter

VTOMAN X6 Pro Tire Inflator

More choices

【VTOMAN Replacement Jump Starter Cable】Battery jumper cable designed to VTOMAN X1 ,X5,X7 ,V10,V10 Pro,V12 Jump Starter,B01 jump starter,jump 600X, jump 1000,V22 car vacuum.
【Force Starter Function】Intelligent clamp equipped force start funtion. If the power of the car battery is too low(<9v). Press“boost”Button to force activation.
【Durable Material】Automotive emergency booster clamp cables high quality abs material on the surface with full copper material cable, durable and good insulation.
【10 Advanced Safety Protections】Our smart Portable Jumper Cable have 10 advanced safety protections include spark proof protection, over charge protection, reverse charger protection, short circuit protection, over current protection, overload protection,over-voltage protection, reverse polarity protection, high temperature protection, low temperature protection.
【24 MONTHS Warranty】You also have 24 MONTHS warranty. Any problems or questions, contact us at any time. We will help you solve it ASAP.

Price: $19.99
(as of Feb 17, 2025 04:31:36 UTC – Details)

From the brand

Keeps You Going…

The Energizer brand is synonymous with world’s first innovation and emerging technologies. Beyond power and portable lighting, our real product is bringing positive energy so that you can do, enjoy and accomplish more than you ever expected.

Modified Sine Wave Inverter

Pure Sine Wave Power Inverter

Battery Charger/Jump Starter

Heavy Duty Jumper Cables

Heavy Duty Jumper Cables

Air compressor, Remote

Car Power Inverter

ENERGIZER 16 FEET JUMPER CABLES – 6 Gauge, 16 FT booster battery jumper cables for jump starting a dead or weak battery. Ideal for trucks, SUVs, full-size cars, mid-size cars and small/compact cars
THICK VINYL COATING – Includes a strong spring and a comfortable handle for secure placement and easy positioning. Thick vinyl coating for protection against rust and corrosion.
CARRYING CASE INCLUDED – Our Energizer jumper cables come with a high-grade travel bag for easy transport and compact storage.
TANGLE FREE CCA BOOSTER CABLES – 16 Foot length makes it easy to reach from one car battery to another. Copper clad aluminum cables remains flexible even at -40°C.
THE BRAND NAME YOU CAN TRUST – We are here to power your car battery and truck with our booster jumper cables. We keep you going and going!

Price: $19.96
(as of Feb 09, 2025 05:59:45 UTC – Details)

The GBC003 Boost HD Precision Battery Clamps are heavy-duty battery clamps for NOCO Boost and Boost X UltraSafe Lithium Jump Starters. It features a needle-nose clamp design for hard-to-reach and oversized battery terminals. And compatible with the GB20, GB40, GB50, and GBX45 UltraSafe Lithium Jump Starters.
Heavy-duty battery clamps designed for NOCO Boost and Boost X UltraSafe Lithium Jump Starters..Fit Type: Universal Fit
Needle-nose clamp profile for jump starting hard-to-reach and oversized battery terminals.
Made from durable, heat stabilized 8 AWG silicone wire that maintains its flexibility in cold weather environments.
Engineered to efficiently transfer maximum current flow with minimal power loss.
Compatible with the GB20, GB40, GB50, and GBX45 UltraSafe Lithium Jump Starters.

Price: $99.95
(as of Feb 04, 2025 05:48:13 UTC – Details)

Customer Reviews

Reviewer: Re
Rating: 5.0 out of 5 stars
Title: Fit perfectly
Review: These fit my jump box perfectly and are nice and sturdy.

Reviewer: manny anaya
Rating: 5.0 out of 5 stars
Title: Perfect!
Review: Perfect fit. Money well spent!

Reviewer: Warren from Virginia Beach
Rating: 5.0 out of 5 stars
Title: Perfect fit
Review: purchased boost clamps for my GB40 jumper kit, worked perfectly.

Reviewer: Hernan Roman
Rating: 5.0 out of 5 stars
Title: Great replacement
Review: Work very well

Reviewer: Howard Harmsen
Rating: 5.0 out of 5 stars
Title: Fit great
Review: Replaced the one I lost, fit great.

Reviewer: Stacey Dawn Earnheart
Rating: 5.0 out of 5 stars
Title: Perfect
Review: Pefit fit and work great

Reviewer: Amazon Customer
Rating: 4.0 out of 5 stars
Title: Perfect fit
Review: Bought as a replacement

Reviewer: jbmaster
Rating: 5.0 out of 5 stars
Title: Quality
Review: Better than the snub nose.

Reviewer: Lex
Rating: 5.0 out of 5 stars
Title:
Review: Llego a tiempo y en buenas condiciones, los cables que tenía ya estaban muy maltratados ya eran hora de cambiarlos por unos nuevos

Reviewer: Alex
Rating: 5.0 out of 5 stars
Title:
Review: Excellent product, just as described and pretty much paid for itself with the numerous times it’s been used. Changing tires on the car and having the radio on was enough to drain my battery, I didn’t notice till the next morning for work when my push start would not start the car. Took me 1 minute to connect and jump start myself and on my way to work.

Reviewer: Amazon Kunde
Rating: 5.0 out of 5 stars
Title:
Review: So ein Notfallpaket sollte jeder in seinem Auto haben

Reviewer: Worked perfectly 👌
Rating: 5.0 out of 5 stars
Title:
Review: As described, great value.

Reviewer: Gippoluna
Rating: 4.0 out of 5 stars
Title:
Review: Ottimo prodotto come sempre il marchio è una garanzia di qualità assoluta

Since 1947, Schumacher has been manufacturing high-quality and innovative power conversion tools and automotive accessories. For reliable and well-made replacement parts for Schumacher products or vehicle batteries, smart mechanics trust the Schumacher Electric line of battery accessories and parts. The Schumacher WM-12 Ring Connection Cable for Battery Chargers and Maintainers connects directly to 5A and under Schumacher chargers and maintainers with a quick-connect harness. It connects easily to hard-to-reach batteries on a variety of vehicles, including motorcycles, power sports and lawn tractors. Use the cable to keep your battery charged between rides and maintained in the off-season. The 18-inch overall length ensures that the plug is easily accessible.
Is Discontinued By Manufacturer ‏ : ‎ No
Product Dimensions ‏ : ‎ 3.9 x 2.7 x 1 inches; 0.8 ounces
Item model number ‏ : ‎ WM-12
Department ‏ : ‎ unisex-adult
Date First Available ‏ : ‎ July 19, 2010
Manufacturer ‏ : ‎ Schumacher Electric
ASIN ‏ : ‎ B003WDDLTO
Country of Origin ‏ : ‎ China

FOR SCHUMACHER CHARGERS/MAINTAINERS: The WM-12 Ring Connection Cable allows you to quickly attach Schumacher brand battery chargers and maintainers; Compatible with units 5A and under
QUICK-CONNECT HARNESS: Schumacher’s quick-connect harness allows you to hook up Schumacher battery charger and/or maintainer in seconds without fussing with clamps or ring leads
COLOR-CODED CABLES: The WM-12’s cables are 18 inches in length to add accessibility to hard-to-reach batteries on motorcycles, power sports vehicles, and lawn tractors; Color-coded for simple, error-free installation
SCHUMACHER QUALITY: Trust Schumacher for reliable and well-made power conversion tools and battery accessories; Schumacher has been manufacturing quality automotive products since 1947
EASY TO INSTALL: Simply connect the WM-12’s ring leads to the battery terminal and then connect your Schumacher battery charger or maintainer with the quick-connect harness

Price: $6.99 – $6.19
(as of Jan 29, 2025 08:46:59 UTC – Details)

Customer Reviews

Reviewer: Zachary zoccolo
Rating: 5.0 out of 5 stars
Title: Great replacement for battery tender kit harness
Review: Works great! I lost the original harness from my battery tender kit so this replacement works great!

Reviewer: Robert F.
Rating: 5.0 out of 5 stars
Title: Battery Tender Cable
Review: Works great I put them on four of my classic cars and my Road King and rotation the battery tender between vehicles.

Reviewer: Koots
Rating: 5.0 out of 5 stars
Title: Perfect
Review: Easy to install had connectors for battery already on wire length good not to long good value for the money

Reviewer: Diquan Taylor
Rating: 4.0 out of 5 stars
Title: Does what it advertises
Review: Very easy to install, charges the battery and maintains once charged. The only issue is have is that it doesn’t have a fuse with it. I’ll update my review if anything happens.

Reviewer: Ryan Delcambre
Rating: 5.0 out of 5 stars
Title: good deal
Review: it’s a well made item. used it on my buell xb9s

Reviewer: rciz
Rating: 5.0 out of 5 stars
Title: Very good
Review: Works very good. Needed a replacement

Reviewer: IT Admin
Rating: 5.0 out of 5 stars
Title: Nice quick connect for charging
Review: Good for charging, jumping, and operating devices with the same connectors. Use it to connect to my scooter batteries w/o disassembling the battery covers.

Reviewer: WHIPPAH
Rating: 5.0 out of 5 stars
Title: Seems fine.
Review: Rings were too small for my battery terminals. Changed out and good to go. I leave these on permanently for fast hook-up to my solar panel for the Battery tender.

Reviewer: Rodrigo Cuevas
Rating: 5.0 out of 5 stars
Title:
Review: El articulo es perfecto y cumple totalmente con la función! Es fácil de instalar. Yo lo instale directo a la bateria de una vstrom 1050 año 2023 y quedó perfecto

Reviewer: David B
Rating: 5.0 out of 5 stars
Title:
Review: Not a complicated item, Connect it to the battery and you now have access to a easy charging. Great price for a great add-on.

Reviewer: Amazon Customer
Rating: 4.0 out of 5 stars
Title:
Review: Lookd like a well build item. But lacks a fuse unit. They cud add a fuse unit also like OE tenders.Delivery took a LOT of time.

Reviewer: Relic
Rating: 5.0 out of 5 stars
Title:
Review: Using it to trickle charge motorcycle battery

Reviewer: José Guadalupe Morales Martínez
Rating: 5.0 out of 5 stars
Title:
Review: Buenos quedaron muy en la batería de mi chevrolet trax 2013 facilita conectar la mordazas

The Schumacher BAF-C50 50-Amp Replacement Battery Clamps are exactly what you need to ensure your automotive battery is up and running. The clamps are easy to use, with clear instructions included on the packaging. They’re also color-coded red and black to provide clear polarity insight, preventing risk of damage from reverse polarity.

If you need a reliable and well-made replacement part or accessory for your Schumacher product or your vehicle battery, you should look no further than Schumacher Electric’s line of battery accessories and replacement parts. Since 1947, Schumacher has been manufacturing high-quality and innovative power conversion tools and automotive accessories. For your peace of mind, each Schumacher product is backed by Schumacher’s minimum one-year warranty period and supported by U.S.-based customer service agents.

En español (ES): Si necesita un repuesto o accesorio confiable y bien fabricado para su producto Schumacher o la batería de su vehículo, no debe buscar más allá de la línea de accesorios y repuestos para baterías de Schumacher Electric. Desde 1947, Schumacher fabrica herramientas de conversión de potencia y accesorios de automóviles innovadores y de alta calidad. Para su tranquilidad, cada producto Schumacher está respaldado por una garantía mínima de un año con Schumacher y cuenta con el respaldo de agentes del servicio de atención al cliente en Estados Unidos.
CHARGE AND TEST: Clamps work with any battery chargers and testing equipment
COLOR-CODED: Red and black clamps provide clear polarity insight; prevents reverse polarity
INSTRUCTIONS INCLUDED: Find clear instructions on the package
With the name in battery chargers around the world, we care about providing exceptional service.

Price: $3.99
(as of Jan 27, 2025 09:35:43 UTC – Details)

Customer Reviews

Reviewer: RickB
Rating: 5.0 out of 5 stars
Title: Good quality
Review: Worked perfect to refresh the clips on my battery charger

Reviewer: Jaxmom
Rating: 5.0 out of 5 stars
Title: Good clamps for the price.
Review: These clamps are at least as good as the original clamps, which last 10 years. I soldered the wires and the whole project took about 20 minutes. I am happy with these $4 clamps.

Reviewer: Cromagnum Man
Rating: 4.0 out of 5 stars
Title: Smaller than expected
Review: One of the clamps on my Schumacher XC130 fell off (not sure how that happened) but I bought this to replace. It was easy to install but the clamp was smaller than I expected and is smaller than the clamps that were on the device. These look like copper/copper clad, and the original were not copper. Hopefully these last a while.

Reviewer: engineer
Rating: 5.0 out of 5 stars
Title: works well so far
Review: I used a soldering gun to solder the cables to the clamps. As you can see, my cables aren’t sized for 50-amps (my power supply puts out only about 6 amps) so the crimp holding the insulation is a little too large. But it still holds just fine – in my application there’s not a lot of force on the cables.

Reviewer: Jim1rver
Rating: 5.0 out of 5 stars
Title: Great replacements for my 50-year old charger connections!
Review: A wire broke and rather than remove the old soldered in piece I opted to install these new/larger connectors and they worked out really great.

Reviewer: Tony G.
Rating: 5.0 out of 5 stars
Title: Good quality vs. cost
Review: I have used some of these to make high current jumper wires for testing automotive/RV systems. However I have a different use for these. When making voltage measurements around batteries, inverters and chargers using thick cables I am not always able to connect my small voltmeter alligator clips to the large connectors. I keep two of these handy to connect to the large power connectors and then connect the small alligator clips to the back of these clips. The voltmeter connections stay in place and my hands are free to flip switches or tighten/loosen things while troubleshooting.

Reviewer: David Alisauskas
Rating: 5.0 out of 5 stars
Title: Battery charger clamps
Review: Worked very well ! I soldered them on just like original! Good quality

Reviewer: Phil 1956
Rating: 3.0 out of 5 stars
Title: Not a replacement for charger contacts
Review: I mistakenly bought these clamps because they look exactly like the ones on my Schumacher speed charger. One of the originals had fallen off and was lost. These are good clamps but the are not built to facilitate attachment to a coopper wire as needed for the charger.

Reviewer: Kevin F.
Rating: 5.0 out of 5 stars
Title:
Review: Genuine part can’t complain

Reviewer: DR
Rating: 5.0 out of 5 stars
Title:
Review: The factory clips broke off the booster after 2 years. These were very easy to attach and work great

Reviewer: Acreage Big Bull
Rating: 4.0 out of 5 stars
Title:
Review: I purchased these to replace those that were on a bargain battery minder that I purchased last year. The original clips on it were awful. They came apart in no time. These look better and so far so good.

Reviewer: Louise Tessier
Rating: 5.0 out of 5 stars
Title:
Review: OK

Reviewer: Dino
Rating: 5.0 out of 5 stars
Title:
Review: Well made and good locking tabs to attach wires. Suggest you run wire up one leg of clamp and down to the bottom of the other clamp and crimp twice. Once to hold cable and the other to make connection to exposed copper wire. Strip enough wire back to double if not triple fold and twist before crimping wire for a solid electrical connection.

From the brand

EMEPOVGY battery

Your Power supply specialists.

Hot Selling Lipo Battery

Welcomed Lipo Battery

About US

EMEPOVGY is the leading manufacturer of high rate discharging lipo battery and nimh battery around the world, which providing high-quality products for decades, and affirmed by many rc hobby lovers in the world.

We like to provide our customers with safer and effective lipo batteries, the most stability power your RC hobbies, enjoy the fun of speed.

Factory Direct

Advanced production technology and strict QC teams to control the quality and security of our batteries.

Our product feature

– High-quality polymer raw materials

– Long cycle life, high energy density

– Low resistance, high reliability

– Excellent safety performance

Customer notice

– 30-day return service.

– Email reply within 24 hours.

– 12 months quality related issues or free replacement.

Feel free to contact

1.Click the “contact seller” in “Your Order” Options

2.Send email to EMEPOVGY after sales mailbox.

【Force Start Funtion】Intelligent clamp equipped with force start funtion. (Tips : When use force start function,the clamp is without protection funtion, please make sure to connect correctly).
【Advanced Intelligient Protection】Smart cable builds in 10 safety protection of short-circuit, reverse-charge, over-temp, over-discharge, over-charge, reverse-polarity and over-current to protect your engine.
【Anti-recharge function】This Jump cables stabilize the circuit to prevent the car’s equipment from being damaged due to the high current when starting the car.
【8AWG Cable and Durable Material】Equipped with 8AWG Cable and high quality ABS material to let the cable is more durable.
【What’s You Will Get】The package comes with a durable jump starter. This portable jumper cables is suitable with 4s 12v jump starter.

Price: $18.99 – $14.99
(as of Jan 26, 2025 03:03:10 UTC – Details)

Customer Reviews

Reviewer: Nina
Rating: 5.0 out of 5 stars
Title: It works for Top Vision G26
Review: The Top Vision G26 was a product pushed by Amazon and several YouTube contributers as a good value, and it sold well. But as with all flash in the pan products (like the Coleman Mosquito Delito, and Dewalt XTR 18 Volt tool platform, etc., etc…), otherwise quality desireable products fail to be supported. You can not get the OEM F18A smart battery clamp for Top Vision anywhere. And repairing the circuit is a no go without a schematic. Also the look alike DB Power F18-1 with the same numbers WILL NOT WORK. So don’t buy it. I really liked the LED display and the voltage read on the OEM clamp, but the true purpose is to start the car. This clamp has the necessary large relay and smart protection and right polarity and plug for the Top Vision G26. There is no force start button, even it looks like one is on the thumb hold. It works and is inexpensive enough to buy a backup before it too is gone. Too bad Top Vision, which is still in business, fails to support this still relatively new product.

Reviewer: Dwight Berry
Rating: 5.0 out of 5 stars
Title: Fits better than the OEM part..
Review: Works as advertised, fits into the jump starter connector better than the original.

Reviewer: Doug S.
Rating: 4.0 out of 5 stars
Title: Good Solution
Review: I have several jump boosters and nearly all became useless due to smart boxes in the positive cable crapping out. Purchased two of these and they work great – cheap and good solution to otherwise useless jump battery box.

Reviewer: Dirk Higgins
Rating: 5.0 out of 5 stars
Title: Works
Review: Used on different boosterLeads wear reversed had to file connectors to fitBut works great

Reviewer: Mark
Rating: 5.0 out of 5 stars
Title: nice
Review: worked out real nice

Reviewer: Amazon Customer
Rating: 5.0 out of 5 stars
Title: It fits like a tee and it works
Review: I start my lawnmower with it and fits the charger perfectly! It worked on the first try with the booster! My dog chewed up the other clips so I got the replacements so happy with the purchase

Reviewer: Michael Ballard
Rating: 1.0 out of 5 stars
Title: Quit working after handful of uses.
Review: Worked great at first but less than 10 uses and they’re dead. Wouldn’t recommend

Reviewer: jacob hortenstine
Rating: 4.0 out of 5 stars
Title: It was what it said it would be
Review: Perfect

Reviewer: Kevin
Rating: 5.0 out of 5 stars
Title:
Review: Pour remplacer mon modèle précédent, rien à frire. Fonctionne parfaitement bien.

Reviewer: stuart r.
Rating: 1.0 out of 5 stars
Title:
Review: Labelled vaguely as fits most.Does not fit Halfords kit

Reviewer: Michy
Rating: 5.0 out of 5 stars
Title:
Review: Tutto perfetto, picco prezzo e vanno benissimo . Molto consigliato .

Reviewer: Jay
Rating: 5.0 out of 5 stars
Title:
Review: Fits most jump starters

Reviewer: D. Hinzmann
Rating: 5.0 out of 5 stars
Title:
Review: An einem 99800 mAh Gerät ( von – ich glaube – JIXIANG, Typ EPS-K08 ) funktioniert dieser Clamp exakt wie es beschrieben ist ( dem JIXIANG lagen original nur Billig-Clamps mit rotem Kästchen ohne Boost-Möglichkeit ) bei, insofern ist dieser Clamp genau das, was man stattdessen will :* Nach Einstecken des EC-5 Steckers blinken die rote und grüne LED in schnellem Wechsel bis zum Anschluss an die Autobatterie und wechseln dann normalerweise zu grünem Dauerlicht* falls nötig, lässt sich der Boost-Mode durch 3-sekündiges Drücken der Boost-Taste aktivieren,* es klackt hörbar und grünes LED Dauerlicht erscheint.Das JIXIANG muss dazu nicht eingeschaltet werden.ABER: An einem etwas älteren GOOLOO 1500A verhielt sich dieser Clamp NICHT wie in seiner Produkt-Beschreibung ausgeführt:* an den Klammern kommen durchaus 16.5 V an,* jedoch rührte sich keine der LEDs, und auch* der Boost-Mode konnte offenbar nicht aufgerufen werden( Ja, das GOOLOO hatte ich ausdrücklich eingeschaltet ).Die Ursache für dieses Andersverhalten könnte in einem Zusatz-Steckerkontakt – den ich bei keinem anderen Gerät dieser Art je bemerkt habe – zwischen den EC-5-Polen sowohl im GOOLOO selbst als auch im EC-5-Stecker des GOOLOO-Clamps liegen.Außerdem ist mir aufgefallen, dass man den EC-5 Stecker dieses Clamps hier versehentlich – trotz DO-Codierung – durchaus falsch in die Buchse des GOOLOO praktizieren könnte! Man muß ja immer für sicheren und stabilen Stromfluss den blauen EC-5 Stecker bis zum Anschlag in seine Buchse stecken, wozu dann auch ein moderater Kraftaufwand gehört.Die Abstände der beiden Pole im EC-5 Stecker dieses Clamps hier sind so groß und die Fassungen so elastisch, dass ein Fehleinstecken möglich erscheint. Ich hatte ihn schon ein paar Millimeter tief falsch drin, als mir das auffiel. Ob dieser Clamp sich gegen solche Bedienfehler schützt, weiß ich nicht und werde es auch nicht ausprobieren. (Beim JIXIANG ist die Buchse etwas anders geformt, so dass ein Falscheinstecken höchstens mit brutaler Gewalt möglich erscheint. So, wie das JIXIANG dürften indes meiner Erfahrung nach die allermeisten Jumpstarter – vor allem der Preiswertklasse – aussehen ).Nun ist es ja so, dass die GOOLOOs m.W. alle sowieso ein ClampSet mit Booster-Taste mitbringen; anders als beim EPS-K08 würde sich ein Zukauf des hier besprochenen Adapters nicht rentieren.Bei Kauf als Ersatzbeschaffung für evtl. defekt gewordenen GOOLOO-Clamps sieht’s schon anders aus.Die an der Ausgangsseite ankommenden 16.5 V lassen wohl darauf schliessen, dass man auch mit dieser Clamp hier und einem GOOLOO prinzipiell jumpstarten kann, aber welche der Schutzfunktionen dabei noch aktiv sind, bleibt unklar.Also: Für Eigner von Jumpstartern mit nur einfacher Schutzelektronik ist dieser Clamp hier mit seiner erweiterten Funktionalität sehr zu empfehlen und dabei preiswert. ( Es gibt andere Ersatz-Clamps bei Amazon, die zwar auch Elektronik in einem trapezförmigen, schwarzen Kästchen wie dieser Clamp haben, denen aber der Boost-Button fehlt und die auch noch teurer sind; der technische Unterschied wird ja leider erst im Falle, dass eine sehr tief entladene Autobatterie wiederbelebt werden soll, klar ).Wie gesagt, das JIXIANG verhält sich mit dieser Clamp ( endlich ) so, wie sich das GOOLOO mit seinem eigenen bewährt hat. Prima!Alles in allem eine Empfehlung, wenn man den Bedarf hat und sich überzeugt hat, dass die EC-5-Buchse am Jumpstarter selbst keine Sonderkontakte aufweist.NB: Statt dieses Clamps k ö n n t e man theoretisch auch ein ClampSet ohne jede Elektronik für ca. €5 weniger erwerben, verzichtet ( in vermutlich einer Stresssituation! ) bei dessen Einsatz dann aber auf JEGLICHEN Schutz vor Fehlbedienung/ Überlastung/ Kurzschluss. Ist die geringe Ersparnis dieses Risiko wert? Ok, man selbst käme mit der unsicheren Lösung vielleicht noch zurecht, aber den Jumpstarter ohne Schutzfunktionen an – möglicherweise technisch wenig bewanderte – Dritte auszuleihen, …. nicht so gut.

From the brand

【Perfect Tools】 The set of Govel jumper cables replacement battery clamps are ideal for replacing, repairing a damaged pair of connectors on an existing jumper cable, or creating custom-length cables.
【Heavy Duty】 The conductors of the Govel alligator pliers are made of pure copper for good electrical conductivity, the strong jaws teeth of the jumper cables clips will not bend out of shape when squeezed.
【Parameter Reference】 The red Govel alligator is positive and the black one is negative. Car battery clamps support cable gauge from 2 to 6 AWG. Input: 12V-24V; Rated current: 100-1000 Amp; Weight 15 oz.
【Widely Use】 These jumper cable clamps are suitable for various battery chargers projects such as voltage tester, all cars and truck batteries, solar panels, camping, boats, electric fences, etc.
【Attention Points】 Don’t forget to slide the rubber handles over the wires before you secure the wire-ends to the clamps. If you have any questions on use, please feel free to contact us.

Price: $19.99 – $14.99
(as of Jan 23, 2025 03:38:26 UTC – Details)

Customer Reviews

Reviewer: steve
Rating: 5.0 out of 5 stars
Title: nice quality
Review: excellent product

Reviewer: TattedSaint
Rating: 5.0 out of 5 stars
Title: Heavy duty!!
Review: These clamps are great. Really heavy duty and strong gripping. My old clamp broke as the housing is plastic. It is part of my car jumper so i wanted to fix it. Man this was easy to replace. I didn’t even use the provided copper thingies that you’re supposed to crimp the wire too. I just removed the old teeth and it fit right into the metal/steel clamp and i was able to screw right in. Didn’t have to mess with anything. Plug and play!! Then i just moved up the plastic sleeve to cover up the handle. Showing a picture of the original black in red to show the difference. I’ll eventually replace the red one once it breaks. I’m pretty stoked on how well these new clamps are. They do feel heavy duty no doubt.

Reviewer: gerald barron
Rating: 4.0 out of 5 stars
Title: The were larger than expecting
Review: They work great, Seam to be of very good quality. Only time will tell

Reviewer: V A
Rating: 5.0 out of 5 stars
Title: Works perfectly for what I needed
Review: Bought these to use with my EcoFlow alternator charger. Installed them easily on the existing factory cables and works great! 800 watts, same as max direct wiring and I can use on any vehicle now.

Reviewer: krug
Rating: 5.0 out of 5 stars
Title: Replacement for Jumpstarter
Review: Used to replace clamps on jump pack. Has worked great so far and fits in clamp holder.

Reviewer: Craig Bernhardt
Rating: 5.0 out of 5 stars
Title: Jaws are well aligned and grab tightly
Review: Bought these for making my winch connections to a car battery. I made a universal connection cable to connect my winch to any truck or SUV which has a battery capable of sustaining 650 CCA or higher. These clamps fit the bill well. They grab the post terminals tightly and the jaws are in perfect alignment. I’ve noticed cheaper store bought pairs usually have weak clamping pressure and the jaws are usually sloppy. These seem well built.

Reviewer: Carlos
Rating: 3.0 out of 5 stars
Title: Kinda cheap
Review: Nice clamp force but they deform easily. Negative clamp was wonky after few uses

Reviewer: Amazon Customer
Rating: 5.0 out of 5 stars
Title: Money well spent
Review: Very sturdy and well made. Great value for the money.

Product Description

KUNCAN 12V Replacement Alligator Clips to EC5 Connector Car Jump Start Cable

KUNCAN Brand: Established in 2005, KUNCAN is a leading designer, manufacturer and supplier of the high-quality products. We provide cable solution for customers in USA, Euro, Asia and so on.

KUNCAN Quality: We insist on using pure copper as cable conductor and RoHS material. We keep developing new product to meet customer’s increasing demand.

KUNCAN Promise: 24 hours passionate replication √; 30 days freely return and exchange √

Any questions, please feel free to let me know.

KUNCAN EC5 Jump Starter Cable with Battery Clamps – 12V Replacement Alligator Clips to EC5 Connector for Emergency Portable Car Battery Booster Cable

This Battery jumper cable is designed to serve as a jump starter replacement cable clamp set for most brands of 12V mini portable jump boxes. Ideal for jump-starting a dead or weak car battery.

Connector A: Strong Alligator Clamp Clip Connector B: EC5 Female Plug (Fit for most car jump portable starters with EC5 male port) Wire Guage: 10 AWG Conductor: Tinned copper (Better than pure copper) Total length: about 37cm Input: 12V Operating temperature: 0 ℃- 60 ℃ Support up to 20000mAh Power bank at 600Amp Current (<3 seconds)

Durable Full Copper Clamps

ABS plastic thickened and long protective cover with metal hardware Alligator Clamps. Red/black insulated exterior ensures quick visual identification for easy set-up.

EC5 Adapter & Match Perfectly

The connecting part has been molded to prevent the plug from disparting due to repeated plugging and unplugging. Standard EC5 Female Plug is compatible with most car mini jump portable starters, and mobile chargers to jump-start a dead or weak car battery.

10AWG Tinned Copper with Sillicon Insulation

Tinned copper is primarily used for protection against oxidation and corrosion. At high temperatures, the corrosion resistance of copper declines. Corrosive copper wire is less efficient at moving electricity and can cause safety hazards. The tin coat is valuable for protecting the wire in this state. Tinned copper can last up to 10 times longer than bare copper but has the same conductivity.

Usage of Car Jump Starter:

1. Connect the red battery clamp of jumper cable to the vehicle’s positive (+) battery and connect the black to the negative pole.

2. Plug the cord of the jumper cable into the jumper starter’s socket.

3. Start the vehicle.

Cautions:

1. Do not reverse the operation sequence of the jump starter.

2. Do not use jump starter to start the vehicle if the number of battery indicators is less than 3 to protect the jump starter from damage.

3. Do remove the product from the vehicle within 30 seconds after the vehicle starts, or it may cause security incidents.

4. Please be careful when using this product, this item can NOT be overloaded. Please check your device’s power before using it.

5. Note: Please check your power bank if it can support your car.

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Customer Reviews

4.5 out of 5 stars

727

4.7 out of 5 stars

1,366

4.6 out of 5 stars

73

4.5 out of 5 stars

413

4.5 out of 5 stars

431

4.6 out of 5 stars

551

Price

$9.99$9.99 $8.99$8.99 $12.99$12.99 $8.99$8.99 $7.99$7.99 $8.99$8.99

Length
0.5FT 2FT 12FT 3FT 3FT 6FT

Cable Gauge
Silicon 10AWG SPT-2 16AWG/2C SPT-2 16AWG/2C SPT-2 16AWG/2C SPT-2 16AWG/2C SPT-2 16AWG/2C

Fuse
NO 15A 15A 15A 15A NO

Dustproof Cap
NO
✓

✓
NO
✓

✓

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Customer Reviews

4.6 out of 5 stars

1,028

4.7 out of 5 stars

1,005

4.6 out of 5 stars

131

4.7 out of 5 stars

809

4.9 out of 5 stars

133

4.5 out of 5 stars

102

Price

$7.99$7.99 $15.99$15.99 $16.66$16.66 $9.99$9.99 $7.99$7.99
—

Length
0.3FT 25FT 26FT 1FT 6FT 12FT

Cable Gauge
SPT-2 16AWG/2C SPT-2 16AWG/2C SPT-2 14AWG/2C SVT 18AWG SJT 18AWG SPT-2 18AWG

Fuse
15A NO 15A NO NO NO

Dustproof Cap
NO
✓
NO NO NO NO

【Replacement Jump Starter Cable】KUNCAN Battery jumper cable designed to serve as a jump starter replacement cable clamp set for most brands of 12V mini portable jump boxes. Compatible with most car mini jump portable starters, and mobile chargers to jump-start a dead or weak car battery.
【Specifications】Wire: 10 AWG, OD 5.5mm, Jacket: Silicone Rubber. Connector: EC5 Female Plug. Compatible with most 12V battery booster jumper with EC5 male output.
【High-Quality 】Strong alligator clamps with tinned copper material cable (better than pure copper), make sure great-quality and safety protection.
【Eazy to Use】 ① – Connect the red battery clamp of the jumper cable to the vehicle’s positive (+) battery and connect the black to the negative (-) pole; ② – Plug the cord of jumper cable into the jumper starter’s socket; ③ – Start the car and remove the clamps.
【PAY ATTENTION PLEASE】Do NOT reverse the operation sequence of the jump starter. Please be careful when using this product, this item can NOT be overloaded, check your device power before using, please. Do remove the product from the vehicle within 30 seconds after the vehicle is started, or it may cause security incidents. Note: Please check your power bank if it can support your car.

Price: $9.99
(as of Jan 22, 2025 11:44:23 UTC – Details)

Customer Reviews

Reviewer: kevin zetts
Rating: 5.0 out of 5 stars
Title: Works great in Halo
Review: I have a halo jump starter. I got it off eBay real cheap. It didn’t come with the jumper cable. I purchased this one and it fit like it wade for it. Unfortunately I had to use it already too. But it worked flawlessly. So if you don’t have this or need a replacement, here ya go. Easy to use.

Reviewer: 68firebird
Rating: 5.0 out of 5 stars
Title: Fit my CAT jumper box perfectly
Review: Good quality and fit my CAT jumper box perfectly

Reviewer: Johnny & Rebecca C.
Rating: 5.0 out of 5 stars
Title: Works Great
Review: Works great! Just make sure to remove once the vehicle has started. And as always because it doesn’t have the fail-safe feature be careful so that the positive and negative do NOT touch each other when connected to the booster.

Reviewer: Travis William Trafka
Rating: 4.0 out of 5 stars
Title: They pinch fingers if screwing around with them
Review: Nice price. They seem durable, haven’t used them yet.

Reviewer: T L Reid
Rating: 5.0 out of 5 stars
Title: Ordered
Review: I was glad the description had a photo of the plug end! I received it timely and it fit. Thank you!

Reviewer: kindle fire
Rating: 5.0 out of 5 stars
Title: it worked
Review: fit perfect and worked

Reviewer: Shane
Rating: 5.0 out of 5 stars
Title: Charger cables
Review: Good product fits perfectly and good price

Reviewer: Amazon Customer
Rating: 1.0 out of 5 stars
Title: Polarity reversed
Review: The clamps are good. The wires are good. The polarity is reversed and I was not aware. I hooked them up to jump a lawn mower and there was a pop. Sparks and smoke. I was able to quickly disconnect the clamps before my jump pack was damaged. The battery post was damaged though.

Reviewer: GUY DESAULNIERS
Rating: 5.0 out of 5 stars
Title:
Review: Identique à l’original

Reviewer: PappaP
Rating: 5.0 out of 5 stars
Title:
Review: Cable pulled out of plug on the original ones. Bought these at a good price and fit perfectly. Must of been a sign…I needed to boost my truck shortly after.