Speedokote SMR-207/211 – Hot Rod Black Paint, Black Satin 2K Urethane, SMR-207 4:1 mix Single Stage Gallon kit with activator included. For California, Delaware, or Maryland, order SMR-456.

Price: $149.00

This sale is for a gallon of satin finish Hot Rod Black Paint (SMR-207) and a quart of activator; which yields 1.25 gallons sprayable. The SMR-207 is a 4.8 lbs/gallon voc (National Rule product). Not for sale in 2.8 lbs/gallon voc areas like California. SMR-207 Hot Rod Black is a 2 component acrylic urethane coating. It mixes 4:1 with a 5-10% optional reduction with Urethane Grade Reducer. This coating is formulated to withstand the same atmospheric conditions as a high quality single stage urethane topcoat. GUN SETUP Fluid Tip psi HVLP Spray Gun 1.3 – 1.4mm 8-10 psi Conventional Gravity Feed 1.3 – 1.4mm 25-30 psi SURFACE PREPARATION: Apply SMR-207 Hot Rod Black directly over primer surfacer that has been finish sanded with 400-500 grit sandpaper. APPLICATION Apply 1 full wet coat followed by 1 medium wet coat. Allow 5-10 minutes flash time between coats. Time to recoat Air Dry 24 hours @ 70°F Bake After cool down
True 2K Urethane Durability
Uniform Jet Black Color
Excellent Exterior Stability from UV Light
Fast Dry
Chemical and Rub Resistant Finish



Customer Reviews

Reviewer: Jon M. Miller
Rating: 5.0 out of 5 stars
Title: Makes me want to paint everything I own
Review: Fantastic paint! Sprays well, lays well, covers well, all with a gorgeous finish that even feels satin smooth. Holds up unbelievably against light impact and abrasions. It looks perfect on the inside as well as the full exterior, really a great product.

Reviewer: Average Married Family Guy
Rating: 5.0 out of 5 stars
Title: Good paint at a good price
Review: Bought this for my pops to use on an old, vintage truck he was restoring. It was a “ratrod” so was never going to be perfect but it turned out pretty good. He painted it himself and was pleased with the results. He said the paint provided good coverage and was fairly easy to apply. I’ve included the results. “Hot Rod” black as purchased.

Reviewer: George H.
Rating: 5.0 out of 5 stars
Title: Surface preparation
Review: I mixed this product 5-1 ratio was very pleased with the results.Plenty of paint and activator to work with.Good flow at 35 psi with a gravity feed paint gun.No need to spend a lot of money on a paint gun, I bought mine at Harbor Freight.Keep the vent clear so important.Do not paint in hot weather l shot mine early morning before temps rose over 75 degrees.Take your time and apply evenly not too wet.

Reviewer: Richard w. Saunders
Rating: 5.0 out of 5 stars
Title: works fine
Review: spray nice and covered nice too..2 coats

Reviewer: Dave Mayes
Rating: 4.0 out of 5 stars
Title: Has a nice sheen when it hardens
Review: Product dries alittle too quick and seems to have alittle texture even when applied in a controlled temp atmosphere. Used a 1.3 HTE gun at 29lbs with trigger pulled. mixed 4 to 1 with activator. sprayed with temp at 72 degrees

Reviewer: Amazon Customer
Rating: 5.0 out of 5 stars
Title: Great Stuff
Review: Very user friendly paint, laid down flawlessly and covered good. Love the finish. Highly recommended.

Reviewer: Gage
Rating: 5.0 out of 5 stars
Title: First timer DIY Custom Auto Paint Job and it looks phenomenal
Review: First of all, Wow! I am thrilled with how this paint worked for my vehicle and how easy it was to use! In applying this paint, I used an 8-gallon, 1.5 HP air compressor with a 1.4mm tip on a gravity feed HVLP cheap spray gun at 8-12 psi. I mixed the paint at the 4:1 ratio it calls for in the instructions without adding any reducer or anything like that, and it was the perfect mix for application! I did all the prep and painting in my front yard at 70-90 degrees. It does better the closer to 70 degrees you get, but when you don’t have a professional auto paint booth, you have to do what you can with the conditions you get. Once all the prep work was done, it took me roughly two 6-hour days to paint my Jeep Cherokee. I applied 3 to 4 coats of paint over the whole body, excluding the bumpers. Again, I am not a professional, and this was my first time painting a vehicle with actual painting equipment and automotive paint, but if you have the patience, time, and dedication to your project vehicle. You can make that project vehicle look good as new! I will add some pictures of my Jeep when I can for reference!

Reviewer: Product did nothing to the rusted truck parts
Rating: 5.0 out of 5 stars
Title: Hot rod black. Laid down I’d say pretty good for a garage job.
Review: