3M Clear Paint Surface Protection Vinyl Film (6 Inch x 60 Inch)

Product Description

Superior Protection: Introducing 3M Scotchgard Clear Paint Protection Film. Your essential solution for preserving the appearance of your car, truck, ATV, or motorcycle. Don’t let surface rust or damage from dirt, salt, grime, moisture, and rocks compromise your vehicle’s appearance. Our thick, transparent top-coat film acts as a strong defense against stones, sand, gravel, road debris, and other contaminants, reducing paint chips and scratches, without altering the appearance of your gloss paint-work in any way.

Virtually Invisible: Once installed, the film becomes virtually invisible, blending seamlessly with your vehicle’s surface. Unlike lesser films, 3M Clear Paint Protection Film does not introduce any unwanted color-cast, or dull any gloss highlights in the paintwork below, preserving it as is.

Rest assured that your car’s original appearance and paint color will remain unaffected while enjoying unmatched protection. And if you should decide to sell your car, simply removing any scratched Paint Protection Film will reveal the unscathed paintwork below, instantly adding to the resale value.

3M Clear Paint Protection Film comes in a broad variety of sizes, ranging from 0.5 inch wide tape rolls, ideal for protecting your car’s trim or door edges, to full rolls big enough to wrap a vehicle. You can easily cut the film to fit any custom size required, using a utility knife or 30 degree cutting blade, and the 3M pressure-based adhesive makes installation a breeze.

So don’t let wear and tear compromise the beauty of your car, truck, ATV, or motorcycle any longer; upgrade to 3M paint protection film today, and drive with confidence!

3M paint protection film is virtually invisible once installed.
Clear polyurethane film is 6mil thick with adhesive backing.
Product applied to reduce paint chips and road damage.
Keeps your car’s paint looking newer, longer!
Step-by-step installation instructions available online..

Price: $19.88
(as of Jan 17, 2025 07:00:49 UTC – Details)

Customer Reviews

Reviewer: virginia
Rating: 5.0 out of 5 stars
Title: Great.
Review: Works nice to prevent scratches

Reviewer: David Roberts
Rating: 5.0 out of 5 stars
Title: easy to install and good protection
Review: Just replaced my hood from a deer hit and my previous hood was horribly rock chipped- I have used this material before on another car with great results so I installed the protection film on the new hood- so far no rock chips- this is the best thing you can do to protect the leading edge of any painted surface from gravel/small rock damage. its invisible, you can barely see the edge and past vehicles, it has never faded or turned yellow.

Reviewer: Discerning1
Rating: 4.0 out of 5 stars
Title: Good Product
Review: I have metal clad patio doors and a smart young poodle that has learned we open the door using paddle style knobs.Now he tries to work the paddles to come inside despite the fact he has his own “doggie door” two paces away.The result is accumulating shallow, unsightly scratch marks in the metal on the door below the paddles. I wanted something that would protect the metal cladding. A quick search online turned up this product and the videos demonstrating it’s use convinced me to try it.It worked perfectly. I also learned that, at least in this application, it is slightly self healing. In other words, slight blemishes such as tiny bubbles or small wrinkles tend to work themselves out.Another upside is the covered surface actually looks better than the original. The biggest disappointment with this product is I don’t have another place to use it.

Reviewer: JB
Rating: 5.0 out of 5 stars
Title: 3M only please
Review: 3M product is superior to other protection vinyl film products that I have used. Now I only use 3M products, super clear, nice flex and the quality and thickness are better to work with.

Reviewer: Geoffrey Sawyer
Rating: 5.0 out of 5 stars
Title: Good stuff
Review: To properly apply this product to a vehicle you will need to create/apply a slip solution and a tack solution. These two items will ensure a higher success rate of proper application. Look up slip solution on YouTube and there will be video explaining what it is a how to make it.

Reviewer: Allan J. Rood
Rating: 3.0 out of 5 stars
Title: This stuff is HARD to put on cleanly without fingerprints and bubbles – but sturdy and functional.
Review: This stuff is HARD to put on cleanly without fingerprints and bubbles. I consider myself handy and meticulous, but I failed at the task of applying this to my curved back bumper horizontal surface. I was protecting new paint and new car from big dog claws jumping in and out of my SUV. The product is thick enough and has some stretch to it. but I was unsuccessful at laying it down dead smooth, and my re-tries created finger prints on the sticky side. It does the job, but if you are not going on a dead flat surface, and can spend a couple hundred dollars, you might be better going to a shop that applies clear bras on cars. Don’t get me wrong, this is not 3Ms fault, I just over-reached the task and my expectations. The resulting product will do the job, and looks fine 10 feet away. Just an FYI.

Reviewer: nicholas potnis
Rating: 5.0 out of 5 stars
Title: This is a must have for Louboutins!!!!!!
Review: This is a must have for your red bottom shoes! It is an easy to work with a durable material. I was surprised at how well it works and how easy to use it is. You cannot wear these shoes without this applied. This product also give the shoe some grip so you do not slip on smooth surfaces. Cheap, easy to apply, and durable. Watch the video to see the dust come right off!

Reviewer: Oogie
Rating: 5.0 out of 5 stars
Title: Use Use Slip/Tack Solution
Review: I used this product to cover inner sill surface on my car to help reduce scuffs to the car vinyl caused by getting in and out of the vehicle. It can be cleanly removed when necessary.The product shipped in a tight roll specific to what I’d ordered (6″x60″). I hung the roll vertically indoors for a couple days with improvised weight at the bottom.The product will tend to curl and stick to itself when the liner is removed so make sure you mist tack solution on sticky side before t has a chance to do so. Mist tack solution to substrate before peeling liner. then mist some on sticky surface. Once applied to substrate, use slip solution on gloss surface of vinyl film and glide flat, smooth-edged bonding tool to remove liquid and bubbles.Slip/tack solution recipes and application techniques are all over YouTube.

Reviewer: Tim Devost
Rating: 5.0 out of 5 stars
Title:
Review: Protects my paint the way it should.

Reviewer: Ramon H
Rating: 3.0 out of 5 stars
Title:
Review: Puede proteger una área muy pequeña.Quise cubrir una sección de 13 pulgadas para proteger el frente expuesto del salpicadero y me quedaba con muchas burbujas. No lo puede utilizar como quería.

Reviewer: عبدالعزيز عبدالرحمن
Rating: 1.0 out of 5 stars
Title:
Review: والله فاشل وصغير ومو نفس الاعلان انه كبير

Reviewer: seven
Rating: 5.0 out of 5 stars
Title:
Review: 水貼りできるので施工がしやすいです。耐久性が高く5年程度は黄ばむこともありません。

Reviewer: Neo
Rating: 5.0 out of 5 stars
Title:
Review: Arrived nicely packed. Easy to apply. Works well.